New Zealand E class locomotive (1922)
The New Zealand E class battery-electric locomotive represented the third unique type of locomotive class to be given the E classification in New Zealand. The first was the E class of nine Double Fairlie steam locomotives of 1872-75; the second E class consisted of a Mallet compound made in 1906; and as both were no longer operated by the New Zealand Railways in 1923, the classification was free to be used for a third time when the small battery-electric locomotive was delivered. This is the only time a classification has been used three times in New Zealand, though re-use happened a number of other times, arguably most notably when the A class of 1906 took the designation originally used by the A class of 1873.
Introduction
This particular E class was ordered for service on the newly electrified Otira Tunnel section of the Midland line and was constructed in 1922.In April 1923, English Electric delivered an order of six locomotives: five EO class mainline locomotives that collected electricity from overhead wires, and E 1, a sixth small battery-electric locomotive for maintenance duties; used in the 1920s.
E 1 had a wheel arrangement of Bo-Bo-2 under the UIC classification system. The battery of 216 "Ironclad Exide" cells was of 1,670 ampere hour capacity at a five hour rate of discharge. Power at an average of 400 volts went to four 22 kW self-ventilating traction motors on each axle. Four DK 30 self ventilating traction motors were each of, for a total tractive effort of and a maximum speed of.
It had a tractive effort of 27.5 kN at one-hour rating, and could haul at on the gradient of 1 in 33 that prevailed between Arthurs Pass and Otira.
Braking was by airbrakes on engine and tender, a tramway type magnetic brake between each wheel set, and a screw type handbrake.