NZR ED class

The NZR ED class locomotive was a type of electric locomotive used in Wellington, New Zealand. They were built by English Electric and the New Zealand Railways Department between 1938 and 1940, and hauled mainly passenger trains on the Wellington region's 1500 V DC electrification, and banked freight trains on the steep section between Paekākāriki and Pukerua Bay.
The locomotives featured a unique wheel arrangement, 1-Do-2 under the UIC classification system, and incorporated a quill drive to the driving wheels.
They were found to be hard on the tracks, leading to speed restrictions on these locomotives and their replacement by E^W class locomotives on the Johnsonville Line after the introduction of the E^W class in 1952. The E^W class was considered more suited to passenger services than the E^D and replaced them on most passenger services on other lines.

Classification

Like all other electric locomotives in New Zealand, the leading letter of the locomotive's classification is E. There are two predominant theories about how the E^D class acquired the second letter, D. The first is that it comes from the "Do" of its 1-Do-2 wheel arrangement. The second is from its original allocation to two locations, Wellington and Otira - Arthur's Pass, hence "duplicated". Official records do not confirm either theory.

Introduction

New Zealand Railways purchased one E^D class locomotive in 1938 from English Electric, No. 101, for use on the newly opened Tawa Flat deviation, which incorporated two long tunnels. This locomotive was known as "The Sergeant" because of the three longitudinal stripes on each side of the body that were unique to this locomotive.
The tender required the supply of locomotive components for the other locomotives required, as it was thought desirable to carry out manufacture in New Zealand in NZR workshops. A further seven locomotives were assembled at the Hutt Workshops, and two at Addington Workshops for use on the Otira - Arthur's Pass section of the Midland Line.
The first locomotive was shipped to New Zealand in January 1938. The first locomotive assembled at the Hutt Workshops was completed and undergoing trials in May 1939.
By December 1939 the assembly of four locomotives at the Hutt Workshops had been completed, and they were expected to be operating to Paekakariki early in the new year.
The changeover was done gradually, and by July 1940 19 of 20 suburban trains were electric loco-hauled. By September 1940 they were hauling most trains, releasing most of the K^A class locomotives at Wellington for use elsewhere.
The two South Island locomotives were transferred north to Wellington in 1943. Their cast iron headstocks could not withstand the shock of shunting, and they could not dissipate the heat generated by rheostatic braking.

Renumbering

With the introduction of the Traffic Monitoring System in 1979, the two remaining locomotives were renumbered ED15 and ED21.

Steam boilers

Each locomotive originally had oil-fired water-tube boilers for passenger carriage steam heaters, supplied by the Sentinel Waggon Works. The boiler could supply of steam per hour at a pressure of, and the water and oil tanks had capacities of respectively, so could steam for four hours before refilling. They were shut down or removed in 1950 due to "ongoing reliability problems"; air turbulence particularly in tunnels or when trains passed on double-track sections resulted in downdraughts affecting the boiler and in passenger discomfort in winter. In June 1951 the Deputy Mechanical Engineer said that the cost of fitting suitable boilers for the section from Paekākāriki to Wellington was not warranted as the carriages leaving Paekākāriki had residual heat, and a steam loco could pre-heat carriages before they left Wellington. In 1954-55 two boilers were installed in the Wellington station basement. The Chief Mechanical Engineer then wanted eight locos to have boilers for the 1955 winter, but parts were not available for the obsolete boilers and "refurbishing did not proceed". It was also found that the boilers were unreliable as the burners had been amended to be outside the normal operating specifications.

Withdrawal

With the introduction of D^A class diesel locomotives on the Paekākāriki via Pukerua Bay to Wellington electrified section in 1967, eight of the class were withdrawn from service in 1969 and scrapped. The remaining two were kept in sporadic service until March 1981, when both locomotives were sold into preservation. There were plans to send them back to the Otira - Arthurs Pass section, but nothing came of this. E^D 101 is preserved by the Silver Stream Railway, while E^D 103 is preserved by the Canterbury Railway Society.

Accidents

A porter-shunter at Johnsonville was accidentally killed in March 1940 when he stepped into the path of a train being shunted by an E^D locomotive.