Loss of load


Loss of load in an electrical grid is a term used to describe the situation when the available generation capacity is less than the system load. Multiple probabilistic reliability indices for the generation systems are using loss of load in their definitions, with the more popular being Loss of Load Probability that characterizes a probability of a loss of load occurring within a year. Loss of load events are calculated before the mitigating actions are taken, so a loss of load does not necessarily cause a blackout.
The concept of probabilistic assessment of power resource adequacy dates back to the 1930s. A foundational paper was published by Calabrese in 1947, which introduced a method to calculate the expected number of days when peak daily electricity demand would exceed the available generating capacity. This paper also started the tradition of describing the reliability metrics with multiple different, and loose, phrases like “loss of load duration” and “expected total number of days of loss of load".

Loss-of-load-based reliability indices

Multiple reliability indices for the electrical generation are based on the loss of load being observed/calculated over a long interval in relatively small increments. The total number of increments inside the long interval is designated as :
  • Loss of load probability is a probability of an occurrence of an increment with a loss of load condition. LOLP can also be considered as a probability of involuntary load shedding;
  • Loss of load expectation is the total duration of increments when the loss of load is expected to occur,. Frequently LOLE is specified in days, if the increment is an hour, not a day, a term loss of load hours is sometimes used. Since LOLE uses the daily peak value for the whole day, LOLH cannot be obtained by simply multiplying LOLE by 24; although in practice the relationship is close to linear, the coefficients vary from network to network;
  • Loss of load events a.k.a. loss of load frequency is the number of loss of load events within the interval ;
  • Loss of load duration characterizes the average duration of a loss of load event:

    One-day-in-ten-years criterion

A typically accepted design goal for is 0.1 day per year, corresponding to. In the US, the threshold is set by the regional entities, like Northeast Power Coordinating Council:
The "1 in 10" value was gradually accepted as the norm in the 1960s.