Lancia Flavia
The Lancia Flavia is an executive car produced by Italian automaker Lancia from 1961 to 1971.
The Flavia was launched with a 1,500 cc engine at the 1960 Turin Motor Show and introduced in major European markets during the next twelve months. Coupé and convertible versions designed by Pininfarina and Vignale quickly followed, together with one or two low volume "specials" including a Zagato coupé. Performance improved over the next ten years as the engine displacement was progressively increased to 1,991 cc. The car remained in production until 1970 when it was updated and renamed as the Lancia 2000. The Flavia was named after Via Flavia, a Roman road leading from Trieste (Tergeste) to Dalmatia.
In 2011, Fiat announced that the Chrysler 200 convertible would be sold in Europe by Lancia under the Flavia name from early 2012.
Chronology
The Lancia Flavia was developed by Antonio Fessia in the late 1950s at the directive of the then Lancia owner Carlo Pesenti as a new model to bridge the gap between the Appia and Flaminia. The car was introduced at the 1960 Turin Motor Show. Initially available only as a four-door saloon, it featured a 1.5 L aluminium boxer engine, Dunlop disc brakes on all four wheels, front-wheel drive, and front suspension by unequal-length wishbones. The boxer engine was the first for an Italian production car as well as disc brakes on all four wheels The front-wheel drive layout was chosen by Fessia to have 62% of the car's weight at the front in order to improve traction. This model was soon joined by a two-door coupé, designed by Pininfarina on a shortened platform. Vignale built 1,601 two-door convertibles, while Zagato designed an outlandish-looking lightweight two-door "sport" version. Only 626 of the Zagato-bodied models were built, plus three prototypes. Ninety-eight had the 1500 engine and the remaining 512 received the larger 1800 engine.The sport version has twin carburetors for extra power ; however, this version of the engine was notoriously difficult to keep in tune. Even the single-carburettor engine suffered from the problem of timing chain stretch. Sprockets with Vernier adjusters were fitted to allow for chain wear, and the cam timing was supposed to be checked every. Early cars also suffered from corrosion of the cylinder heads caused by using copper gaskets on aluminium heads; nevertheless, the car had good performance for its day, considering the cubic capacity.
Later development of the engine included an enlargement to 1.8 L, a version with mechanical injection using the Kugelfischer system, and a five-speed manual gearbox. In May 1967 a rebodied version of the Berlina with a new interior went on sale, with model number 819, it is usually referred to as the Series II. The engines were originally the same as earlier, but in 1969 these were changed to a new generation with an 80 mm stroke, narrow-bore versions of the new 2-litre 820-series engine. With the introduction of the 819, the Vignale and Zagato versions were discontinued, while the coupé model was on hiatus. The coupé version then returned with new bodywork, first presented in March 1969 at the Geneva Motor Show. The engine increased to 2.0 L in capacity, available with carburetion or fuel injection, and four- or five-speed gearbox. The 2.0 L models were only made with bodies featuring the revised design. Then in 1971, after Fiat took control of the company, the "Flavia" badge was discontinued as were the smaller engines, leaving only the 2000 Berlina and coupé.
Engines
| Model | Years | Engine | Displacement | Power | Fuel system |
| Berlina | 1960-1962 | Lancia H4 ohv | 1,500 cc | Single carburetor | |
| Coupé, cab, sport | 1962 | Lancia H4 ohv | 1,500 cc | Double carburetor | |
| 1500 | 1963-1968 | Lancia H4 ohv | 1,488 cc | Single carburetor | |
| 1800 | 1963-1968 | Lancia H4 ohv | 1,800 cc | Single carburetor | |
| 1800 sport | 1963-1967 | Lancia H4 ohv | 1,800 cc | Double carburetor | |
| 1800 Iniezione | 1965-1968 | Lancia H4 ohv | 1,800 cc | Fuel injection | |
| 1500 | 1969-70 | Lancia H4 ohv | 1,490 cc | Single carburetor | |
| 1800 | 1969-70 | Lancia H4 ohv | 1,816 cc | Single carburetor | |
| 2000 | 1969-1971 | Lancia H4 ohv | 1,991 cc | Single carburetor | |
| 2000 Iniezione | 1969-1971 | Lancia H4 ohv | 1,991 cc | Fuel injection |
Performance
The British Motor magazine tested the 1500 model in 1961 and found it had a top speed of and acceleration from 0- in 18.6 seconds. A "touring" fuel consumption of was recorded. On the British market it cost £1,499 including taxes of 688.By 1967 the engine size had grown to 1,800 cc. Testing a four-door Flavia, Autocar magazine recorded a top speed of, a 0- time of 15.0 seconds and an overall fuel consumption of. This put it behind the rival BMW 1800 TI for performance, though slightly ahead on fuel consumption. The testers commended the smoothness of the engine but found it lacked low speed punch. Overall they thought the performance "pleasingly deceptive" because the car was "faster than it feels". The UK car market was still insulated by tariffs, but with the BMW 1800 TI retailing at £1,498 and the Flavia's recommended retail price now £1,909, sales volumes were clearly not a Lancia priority. From the dominant UK domestic market player, the mechanically less sophisticated Ford Corsair 2000E was retailing at £1,008.
US Car and Driver magazine tested the 1800 Coupe model equipped with a 4-speed manual transmission in April 1964, comparing it against the Flaminia 3C GT and found that the engine got a "little fussy" at above 5,000 rpm and that "one tries to change up into a fifth gear which is not there". The reviewers however, praised the comfortable cruising speeds, the refined transmission than the base 1500 model along with the handling and the refined front-wheel drive system mentioning that "a lot of people could drive the Flavia a long way without realizing it has front wheel drive". The magazine measured a top speed of, a 0- time of 14.2 seconds and a fuel consumption of.