Kwanasaurus
Kwanasaurus is an extinct genus of silesaurid dinosauromorph reptiles from the Late Triassic of Colorado. It is known from a single species, Kwanasaurus williamparkeri. Kwanasaurus had a deeper, stronger skull and greater specialization for herbivory compared to other silesaurids. It also possessed many unique characteristics of the snout, ilium, and lower part of the femur. It was described along with new specimens of Dromomeron from the Eagle Basin, the northernmost extent of the Chinle Formation.
Discovery
Kwanasaurus hails from Triassic deposits in the Eagle Basin surrounding the town of Eagle, Colorado. This area contains the most northern exposures of the Chinle Formation, which is famous for its Late Triassic fossils of dinosaurs and other reptiles. Tentative terrestrial reptile biostratigraphy estimates that the Eagle Basin fossils, which were preserved in red siltstone, belong to the Revueltian biozone of the mid to late Norian stage of the Triassic, 215-207 million years ago. The holotype of Kwanasaurus is a partial silesaurid maxilla, DMNH EPV.65879. All other silesaurid maxillae recovered from the area seem to represent the same taxon, indicating that Kwanasaurus was likely the only silesaurid from the Eagle Basin. With this in mind, all other Eagle Basin fossils resembling those of silesaurids have been referred to the taxon. These include multiple dentaries, teeth, ilia, femora, and a humerus. Dinosauromorph-like tibia and scapulae from the area may also belong to Kwanasaurus, though they have not been referred to the genus due to lacking any clear silesaurid features. Kwanasaurus was named in a 2019 paper by Jeffrey W. Martz and Bryan J. Small, along with the description of new Dromomeron material. The genus name incorporates kwana, the Ute name for eagle. The specific name commemorates paleontologist Bill Parker.Description
Skull
The maxilla is much deeper and more robust in Kwanasaurus than in any other silesaurid. There are replacement pits on the inner edge of the tooth row similar to those of thyreophorans, and smaller and more numerous pits on the outer surface of the maxilla. Five of the replacement pits at the midlength of the bone are set in a groove, a trait also present in Silesaurus and silesaurid skull material from the Ntawere Formation. The front of the maxilla is similar to that of Lewisuchus and Silesaurus, with a triangular premaxillary facet and thick, sharp vomerine flange. The ascending process of the maxilla is a thin, anteroposteriorly wide, and steeply-rising prong, and the antorbital fossa has a concave lower edge, both like Silesaurus. The inner surface of the maxilla has a thick medial flange, which droops down to the tooth row as a smooth triangular blade. This medial flange is unique to Kwanasaurus among silesaurids, and likely extended the maxilla's connection with the palate behind the vomer. The rear portion of the holotype maxilla is characteristically complex and similar to that described for Plateosaurus. These complex traits include a posterolateral flange which likely shielded part of the jugal, a pair of deep dorsomedial grooves, and a broad groove behind the medial flange which likely articulated with the palatine.Lower jaw bones referred to Kwanasaurus include DMNH EPV.63136, one of the most complete dentaries found for any silesaurid. As in other sulcimentisaurians, the meckelian groove is positioned close to the lower edge of the jaw and the teeth are constricted at the root. The front tip of the dentary is pointed, toothless, and has a lateral groove akin to that of Silesaurus and Sacisaurus, along with several medial grooves. Further back, the dentary is relatively deep and develops a lateral ridge similar to one reported for Diodorus and Eucoelophysis. The pattern of pitting and holes on the outer surface of the dentary also resembles those taxa. The tooth row is edged by a medial groove connecting a series of replacement pits; above the groove the bone is inset similar to the case in Silesaurus, Eucoelophysis, and Technosaurus. Kwanasaurus is the only silesaurid to preserve data on the mandibular fenestra. This hole in the jaw was triangular, edged from below by a posteroventral process of the dentary which also overlapped a partial angular. The dentary's posterodorsal process is sharp along its upper edge and notched along its lower edge.
Teeth
Teeth of Kwanasaurus have been found both as isolated material and within maxillae and dentaries. Isolated teeth are leaf-shaped, with coarse denticles, slightly flattened sides, and crown tips more than halfway towards the rear of the tooth. The lingual side of the tooth has a thick vertical ridge covered in striations. Sacisaurus, Eucoelophysis, and possibly Technosaurus are the only other silesaurids known to possess similar teeth, although leaf-shaped teeth are also common in various other herbivorous archosaurs. In some of the maxilla, the teeth are short and swollen and become smaller towards the rear of the bone. The dentary teeth are similar but more asymmetrical. The middle of the dentary has the largest and most denticulate teeth in the jaw. There are 12 maxillary teeth and 14 dentary teeth. These teeth extend further back in the skull than most silesaurids, as is the case in Lewisuchus, but they are not as numerous as those of that taxon.Like other silesaurids, Kwanasaurus has ankylothecodont tooth implantation, meaning the teeth are set in sockets but also fused to the surrounding bone. At least in the maxilla, Kwanasaurus has a complex pattern of tooth replacement. This pattern involves replacement teeth being formed along the lingual edge of the tooth row, shifting outwards, fusing to the leftover socket and leaving behind a replacement pit. The tooth row has alternating empty and full sockets, indicating that adjacent teeth were never replaced at the same time. This contrasts with Silesaurus and Technosaurus, but resembles the condition in some specimens of Sacisaurus, Diodorus, and Asilisaurus.
Forelimbs
A long and slender humerus is the only forelimb bone safely assigned to Kwanasaurus, based on its similarity to that of Silesaurus and Diodorus. The proximal portion is slightly expanded, but the humeral head is not as thick or straight as that of other silesaurids. Unlike dinosaurs, the deltopectoral crest is small and extends less than a third down the length of the shaft. The distal portion of the humerus is simple and barely expanded, twisted relative to the proximal portion, but also with a groove running up its anterolateral surface.Hip and hindlimbs
The hip is only represented by the ilium, which had a low, saddle-shaped upper blade like silesaurids such as Silesaurus, Eucoelophysis, and Ignotosaurus. It also resembles these taxa in its elongated and expanded preacetabular process. Kwanasaurus takes this trend further, lengthening the preacetabular process so that it projects further forwards than the pubic peduncle, an adaptation otherwise only seen in several lineages of dinosaurs among dinosauromorphs. The postacetabular process is large and possesses a well-developed brevis shelf and brevis fossa, traits standard for sulcimentisaurians. Like many basal dinosauromorphs, the brevis shelf merges with the edge of the acetabulum and the rear edge of the postacetabular process has a small pointed extension. The acetabulum is deep and has a very thin and concave lower edge. This contrasts with other silesaurids, which have a straight lower edge to the acetabulum, and instead may suggest a partially perforated acetabulum akin to that of dinosaurs. The inner surface of the ilium has several facets for the sacral ribs. The second facet is twice as long as the first and may have encompassed two sacral ribs, suggesting that Kwanasaurus possessed three sacral vertebrae.Multiple femora of various sizes and conditions have been referred to Kwanasaurus. The femoral head was similar to that of other advanced silesaurids, according to several traits. These include a longitudinal groove on its upper surface, a straight articular facet on the medial surface, a distinct notch on its underside, and an overall triangular cross section due to the lack of a distinct posteromedial tuber. Directly below the head extends a ridge known as a dorsolateral trochanter. Adjacent to it is the anterior trochanter, a pronounced vertical crest characteristic of dinosauriforms. The crest was blade-like, triangular, and straight-edged, proportionally most similar to Silesaurus among dinosauriforms. Only one femur referred to Kwanasaurus possessed additional muscle attachment structures such as a trochanteric shelf and a swelling that likely represented the iliotrochanteris caudalis attachment site. Asilisaurus and Silesaurus are the only other silesaurids with trochanteric shelves, and its development is sometimes considered to be related to skeletal maturity. However, the largest Kwanasaurus femur lacks a trochanteric shelf, despite its presence in the smaller 125924 specimen. All specimens had a low fourth trochanter, sometimes edged by an anterior depression as in Sacisaurus and Diodorus. The distal portion of the femur possessed several unique features. The medial condyle was a sharp flange, notably thinner than the lateral condyle and crista tibiofibularis. This is similar to lagerpetids but in contrast to the broader medial condyle of all other silesaurids. Kwanasaurus also possesses a characteristic depression on the distal surface of the femur, in front of the crista tibiofibularis. Nevertheless, the notably deep and extensive sulcus present between the medial and lateral condyles is in line with that of other silesaurids.