List of ISO standards 1–1999


This is a list of published International Organization for Standardization standards and other deliverables. For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 have been made freely and publicly available.

ISO 1 – ISO 199

  • ISO 1:2016 Geometrical product specifications — Standard reference temperature for the specification of geometrical and dimensional properties
  • ISO GUIDE 1:1972 Presentation of International Standards and technical reports
  • IWA 1:2005 Quality management systems — Guidelines for process improvements in health service organizations
  • ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products
  • ISO/IEC GUIDE 2:2004 Standardization and related activities — General vocabulary
  • IWA 2:2007 Quality management systems — Guidelines for the application of ISO 9001:2000 in education
  • ISO 3:1973 Preferred numbers — Series of preferred numbers
  • IWA 3:2005 Image safety — Reducing the incidence of undesirable biomedical effects caused by visual image sequences
  • ISO/IEC GUIDE 3:1981 Identification of national standards that are equivalent to International Standards
  • ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications
  • ISO GUIDE 4:1975 Preparation of standard methods of measuring performance of consumer goods
  • IWA 4:2009 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government
  • ISO 5 Photography and graphic technology — Density measurements
  • * ISO 5-1:2009 Part 1: Geometry and functional notation
  • * ISO 5-2:2009 Part 2: Geometric conditions for transmittance density
  • * ISO 5-3:2009 Part 3: Spectral conditions
  • * ISO 5-4:2009 Part 4: Geometric conditions for reflection density
  • IWA 5:2006 Emergency preparedness
  • ISO GUIDE 5:1976 Designation of internationally standardized items
  • ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
  • IWA 6:2008 Guidelines for the management of drinking water utilities under crisis conditions
  • ISO GUIDE 6:1977 Mention of reference materials in International Standards
  • ISO 7:Pipe threads where pressure-tight joints are made on the threads
  • * ISO 7-1:1994 Part 1: Dimensions, tolerances and designation
  • ** ISO 7-1:1994/COR 1:2007 Technical Corrigendum 1
  • * ISO 7-2:2000 Part 2: Verification by means of limit gauges
  • ISO/IEC GUIDE 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
  • ISO 8:2019 Information and documentation — Presentation and identification of periodicals. For the 8-bit coded character set, see ISO/IEC 8859
  • ISO GUIDE 8:1977 Guidelines for a national standards information centre
  • IWA 8:2009 Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method
  • ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
  • ISO GUIDE 9:1976 Courses in standardization
  • IWA 9:2011 Framework for managing sustainable development in business districts
  • ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins
  • ISO GUIDE 10:1977 Registration of standardizing bodies
  • ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
  • ISO 12:1987 Aerospace — Pipelines — Identification
  • ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines
  • ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
  • ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan
  • ISO 16:1975 Acoustics — Standard tuning frequency
  • ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
  • ISO 18:1981 Documentation — Contents list of periodicals
  • ISO/R 19:1956 Shipbuilding — Inland navigation — Deckbolts
  • ISO/R 20:1956 Shipbuilding — Inland navigation — Rivets for Hatches
  • ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains
  • ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
  • ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications
  • ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion-picture films for direct front projection — Specifications
  • ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications
  • ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications
  • ISO/R 27:1956 Cinematography — Emulsion and sound record positions in camera for 16 mm motion-picture films
  • ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications
  • ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications
  • ISO/R 30:1956 Bibliographical strip
  • ISO 31:Quantities and units
  • ISO 32:1977 Gas cylinders for medical use — Marking for identification of content
  • ISO/R 33:1957 Rubber, vulcanized or thermoplastic — Du Pont constant load method of measuring abrasion resistance of vulcanized natural and synthetic rubbers
  • ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength measuring abrasion resistance of vulcanized natural and synthetic rubbers
  • * ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
  • * ISO 34-2:2015 Part 2: Small test pieces
  • ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability
  • ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
  • ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
  • ISO/R 38:1957 Shipbuilding — Bollards
  • ISO/R 39:1957 Shipbuilding — Anchor Chains — Lugless Joining Shackles
  • ISO/R 40:1957 Shipbuilding — Anchor Chains — Studless Links
  • ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps
  • ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads
  • ISO 43:2016 Aircraft — Jacking pads
  • ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation
  • ISO 45:1990 Aircraft — Pressure refuelling connections
  • ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets
  • ISO/R 47:1957 Aircraft — Toilet connections
  • ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness
  • * ISO 48-1:2018 Part 1: Introduction and guidance
  • * ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD
  • * ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness scale
  • * ISO 48-4:2018 Part 4: Indentation hardness by durometer method
  • * ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method
  • * ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method
  • * ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
  • * ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
  • * ISO 48-9:2018 Part 9: Calibration and verification of hardness testers
  • ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
  • ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7
  • ISO/R 51:1957 Shipbuilding — Inland navigation — Pipe lines for the transport of combustible liquids — nominal diameters
  • ISO/R 52:1957 Belt drives — Grooved pulleys — Sections A, B, C, D, and E
  • ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
  • ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
  • ISO 55:1977 Seedlac — Specification
  • ISO 56:1979 Shellac — Specification
  • * ISO 56-1:1979 Hand-made Shellac — Specification
  • * ISO 56-2:1979 Machine-made Shellac — Specification
  • ISO 57:1975 Bleached lac — Specification
  • ISO/R 58:1958 Substances of paper
  • ISO 59:1976 Plastics — Determination of acetone-soluble matter
  • ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel
  • ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
  • ISO 62:2008 Plastics — Determination of water absorption
  • ISO 63:1975 Flat transmission belts — Lengths
  • ISO 64:1974 Steel tubes — Outside Diameters
  • ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
  • ISO/R 66:1958 Paper vocabulary — First series of terms
  • ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size
  • ISO 68 ISO general-purpose screw threads – Basic profile
  • * ISO 68-1:1998 Part 1: Metric screw threads
  • * ISO 68-2:1998 Part 2: Inch screw threads
  • ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions
  • ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions
  • ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
  • ISO/R 72:1958 Cinematography — Sound records and scanning area of 35 mm double width push-pull sound prints — Normal and offset centerline types
  • ISO/R 73:1958 Cinematography — Image area produced by camera aperture and maximum projectable image area on 35 mm motion-picture film — Positions and dimensions
  • ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions
  • ISO 75 Plastics — Determination of temperature of deflection under load
  • * ISO 75-1:2020 Part 1: General test method
  • * ISO 75-2:2013 Part 2: Plastics and ebonite
  • * ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
  • ISO 76:2006 Rolling bearings — Static load ratings
  • ISO/R 77:1958 Bibliographical references — Essential elements
  • ISO 78 Chemistry — Layouts for standards
  • * ISO 78-2:1999 Part 2: Methods of chemical analysis
  • * ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry
  • * ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis
  • ISO/R 79:1968 Steel — Brinell hardness test
  • ISO/TR 79:2015 Reference materials – Examples of reference materials for qualitative properties
  • ISO/R 80:1968 Steel — Rockwell hardness test
  • ISO/R 81:1967 Steel — Vickers hardness test
  • ISO 82:1974 Steel — Tensile testing
  • ISO 83:1976 Steel — Charpy impact test
  • ISO/R 84:1959 Steel — Izod impact test
  • ISO/R 85:1959 Steel — Bend test
  • ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
  • ISO/R 87:1959 Steel — Simple bend testing of sheet and strip less than 3 mm thick
  • ISO/R 88:1959 Steel — Reverse bend testing of sheet and strip less than 3 mm thick
  • ISO 89:1974 Steel — Tensile testing of wire
  • ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities
  • * ISO 90-1:1997 Part 1: Open-top cans
  • * ISO 90-2:1997 Part 2: General use containers
  • * ISO 90-3:2000 Part 3: Aerosol cans
  • ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors and standard reference conditions
  • ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side
  • ISO 93 Textile machinery and accessories — Cylindrical sliver cans
  • * ISO 93-1:2006 Part 1: Main dimensions
  • * ISO 93-2:2006 Part 2: Spring bottoms
  • * ISO 93-3:1981 Part 3: Packaging sliver cans
  • ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames
  • ISO/R 95:1972 Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for "C" travellers
  • ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames
  • * ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
  • * ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
  • ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers
  • ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers
  • ISO 99:1975 Pulleys for flat transmission belts — Diameters
  • ISO 100:1984 Pulleys for flat transmission belts — Crowns
  • ISO/R 101:1959 Width of sheets of paper
  • ISO 102:1990 Aircraft — Gravity filling orifices
  • ISO/R 103:1959 Aircraft — Instrument Cases — Sizes and mounting dimensions
  • ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan
  • ISO 105 Textiles — Tests for colour fastness
  • * ISO 105-A01:2010 Part A01: General principles of testing
  • * ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
  • * ISO 105-A03:2019 Part A03: Grey scale for assessing staining
  • * ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
  • * ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
  • * ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
  • * ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
  • * ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
  • * ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
  • * ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
  • * ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure
  • * ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
  • * ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
  • * ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
  • * ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
  • * ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
  • * ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
  • * ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1
  • * ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2
  • * ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3
  • * ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4
  • * ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5
  • * ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
  • * ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
  • * ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
  • * ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
  • * ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
  • * ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
  • * ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
  • * ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
  • * ISO 105-E01:2013 Part E01: Colour fastness to water
  • * ISO 105-E02:2013 Part E02: Colour fastness to sea water
  • * ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water
  • * ISO 105-E04:2013 Part E04: Colour fastness to perspiration
  • * ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
  • * ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
  • * ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
  • * ISO 105-E08:1994 Part E08: Colour fastness to hot water
  • * ISO 105-E09:2010 Part E09: Colour fastness to potting
  • * ISO 105-E10:1994 Part E10: Colour fastness to decatizing
  • * ISO 105-E11:1994 Part E11: Colour fastness to steaming
  • * ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
  • * ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
  • * ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
  • * ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
  • * ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
  • * ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
  • * ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
  • * ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
  • * ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
  • * ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
  • * ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
  • * ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
  • * ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
  • * ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
  • * ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
  • * ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
  • * ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
  • * ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
  • * ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
  • * ISO 105-J03:2009 Part J03: Calculation of colour differences
  • * ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant
  • * ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
  • * ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
  • * ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite
  • * ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite
  • * ISO 105-N05:1993 Part N05: Colour fastness to stoving
  • * ISO 105-P01:1993 Part P01: Colour fastness to dry heat
  • * ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
  • * ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
  • * ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
  • * ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
  • * ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
  • * ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
  • * ISO 105-X03:1987 Part X03: Colour fastness to chlorination
  • * ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
  • * ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
  • * ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
  • * ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
  • * ISO 105-X08:1994 Part X08: Colour fastness to degumming
  • * ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
  • * ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
  • * ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
  • * ISO 105-X12:2016 Part X12: Colour fastness to rubbing
  • * ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
  • * ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
  • * ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas
  • * ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
  • * ISO 105-X19:2020 Part X19: Colour fastness to rubbing
  • * ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
  • * ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
  • * ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
  • * ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
  • * ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
  • * ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
  • * ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
  • * ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
  • * ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
  • * ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
  • * ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
  • ISO/R 106:1959 Shipbuilding — Light metal rivets — Diameters and clearances
  • ISO/R 107:1959 Shipbuilding — Light metal rivets — Ship heads
  • ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides
  • ISO 109:1982 Textile machinery — Working widths of weaving machines
  • ISO 110:1978 Textile machinery and accessories — Cones for yarn winding — Half angle of the cone 9 degrees 15'
  • ISO 111:1978 Textile machinery and accessories — Cones for yarn winding — Half angle of the cone 4 degrees 20'
  • ISO 112:1983 Textile machinery and accessories — Cones for yarn winding — Half angle of the cone 3 degrees 30'
  • ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions
  • ISO 114:1980 Unalloyed magnesium ingots — Chemical composition
  • ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition
  • ISO/R 116:1959 Pesticides — Common names — First series of terms
  • ISO/R 117:1959 Plastics — Polystyrene — Determination of boiling water absorption
  • ISO 118:1976 Plastics — Polystyrene — Determination of methanol-soluble matter
  • ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
  • ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
  • ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars
  • ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes
  • ISO 123:2001 Rubber latex — Sampling
  • ISO 124:2014 Latex, rubber — Determination of total solids content
  • ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
  • ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content
  • ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number
  • ISO 128 Technical product documentation — General principles of representation
  • ISO 129 Technical product documentation — Indication of dimensions and tolerances
  • * ISO 129-1:2018 Part 1: General principles
  • * ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
  • * ISO 129-5:2018 Part 5: Dimensioning of structural metal work
  • ISO/R 130:1959 Aircraft — Colour identification of mechanical control circuits
  • ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air
  • ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth
  • ISO 133:1983 Rubber, vulcanized — Determination of crack growth
  • ISO 134:1973 Plain end steel tubes for general purposes
  • ISO/R 135:1959 Paper vocabulary — Second series of terms
  • ISO 136:1972 Steel — Simple torsion testing of wire
  • ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method
  • ISO/R 138:1960 Textiles — Universal yarn count system
  • ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing
  • ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements
  • * ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission
  • * ISO 140-2:1991 Part 2: Determination, verification and application of precision data
  • * ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements
  • * ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms
  • * ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
  • * ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors
  • * ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
  • * ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
  • * ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it
  • * ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements
  • * ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors
  • * ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor
  • * ISO/TR 140-13:1997 Part 13: Guidelines
  • * ISO 140-14:2004 Part 14: Guidelines for special situations in the field
  • * ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining
  • * ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements
  • ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides
  • ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides
  • ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms
  • ISO 144:1973 Steel — Reverse bend testing of wire
  • ISO/R 145:1960 Steel — Wrapping test for wire
  • ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100
  • * ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
  • ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel
  • ISO 148 Metallic materials — Charpy pendulum impact test
  • * ISO 148-1:2016 Part 1: Test method
  • * ISO 148-2:2016 Part 2: Verification of testing machines
  • * ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
  • ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip
  • ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
  • ISO 151:1974 Shipbuilding details — Marking of hatchway beams
  • ISO/R 152:1960 Shipbuilding details — Marking of wooden hatchway covers
  • ISO/R 153:1960 Shipbuilding details — Ordinary Glasses for scuttles and lights — Dimensions
  • ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys
  • ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
  • ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines
  • ISO 157:1996 Coal — Determination of forms of sulfur
  • ISO/R 158:1960 Coal — Determination of ash
  • ISO/R 159:1960 Coal — Determination of total sulfur by the Strambi method
  • ISO 160:1980 Asbestos-cement pressure pipes and joints
  • ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures
  • * ISO 161-1:2018 Part 1: Metric series
  • * ISO 161-2:1996 Part 2: Inch-based series
  • ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions
  • ISO/R 163:1960 Cinematography — Magnetic striping of 16 mm film perforated along both edges
  • ISO/R 164:1960 Aluminium and aluminium alloys — Castings — Chemical composition
  • ISO/R 165:1960 Metallic materials — Steel tubes — Flanging test
  • ISO/R 166:1960 Metallic materials — Steel tubes — Drift expanding test
  • ISO/R 167:1960 Metallic materials — Steel tubes — Bend test
  • ISO/R 168:1960 Stretchers
  • ISO/R 169:1960 Sizes of photocopies readable without optical devices
  • ISO/R 170:1960 Shipbuilding — Anchor Chains — Stud links
  • ISO 171:1980 Plastics — Determination of bulk factor of moulding materials
  • ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
  • ISO/R 173:1961 Plastics — Determination of the percentage of styrene in polystyrene with Wijs solution
  • ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution
  • ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
  • ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
  • ISO 177:2016 Plastics — Determination of migration of plasticizers
  • ISO 178:2019 Plastics — Determination of flexural properties
  • ISO 179 Plastics — Determination of Charpy impact properties
  • * ISO 179-1:2010 Part 1: Non-instrumented impact test
  • * ISO 179-2:2020 Part 2: Instrumented impact test
  • ISO 180:2019 Plastics — Determination of Izod impact strength
  • ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
  • ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
  • * ISO 182-1:1990 Part 1: Congo red method
  • * ISO 182-2:1990 Part 2: pH method
  • * ISO 182-3:1993 Part 3: Conductometric method
  • * ISO 182-4:1993 Part 4: Potentiometric method
  • ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants
  • ISO/R 184:1961 Grey cast irons — Brinell hardness test
  • ISO 185:2020 Grey cast irons — Classification
  • ISO 186:2002 Paper and board — Sampling to determine average quality
  • ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
  • ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
  • ISO/R 189:1961 Principles of operation of standards marks
  • ISO/R 190:1961 Tensile testing of light metals and their alloys
  • ISO/R 191:1971 Brinell hardness test for light metals and their alloys
  • ISO/R 192:1971 Wickers hardness test for light metals and their alloys
  • ISO/R 193:1961 Microcopies on transparent bases: sizes of recommended bases
  • ISO 194:1981 Plastics — List of equivalent terms
  • ISO/R 195:1961 Copper and copper alloys — Drift expanding test
  • ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury nitrate test
  • ISO 197 Copper and copper alloys — Terms and definitions
  • * ISO 197-1:1983 Part 1: Materials
  • * ISO 197-2:1983 Part 2: Unwrought products
  • * ISO 197-3:1983 Part 3: Wrought products
  • * ISO 197-4:1983 Part 4: Castings
  • * ISO 197-5:1980 Part 5: Methods of processing and treatment
  • ISO/R 198:1961 Double-deck flat pallets for through transit of goods
  • ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification and tolerance values