IEC 61162
IEC 61162 is a collection of IEC standards for "Digital interfaces for navigational equipment within a ship".
The 61162 standards are developed in Working Group 6 of Technical Committee 80 of the IEC.
Sections of IEC 61162
Standard IEC 61162 is divided into the following parts:- Part 1: Single talker and multiple listeners
- Part 2: Single talker and multiple listeners, high-speed transmission
- Part 3: Serial data instrument network
- Part 450: Multiple talkers and multiple listeners–Ethernet interconnection
- Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
does not define any of these. This is left to the .
IEC 61162-1
Single talker and multiple listeners.IEC 61162-2
Single talker and multiple listeners, high-speed transmission.IEC 61162-3
Serial data instrument network, multiple talker-multiple listener, prioritized data.IEC 61162-450
Multiple talkers and multiple listeners.This subgroup of TC80/WG6 has specified the use of Ethernet for shipboard navigational networks. The specification describes the transport of NMEA sentences as defined in 61162-1 over IPv4. Due to the low amount of protocol complexity it has been nicknamed Lightweight Ethernet or LWE in short.
There are three revision: the original published in 2011, and updates in 2018 and 2024.
IEC 61162-450/460
IEC 61162-460:2015 is an add-on to the IEC 61162-450 standard. This standard extends the informative guidance given in Annex D of IEC 61162-450:2011. The first edition was published in August 2015.State May 2016 is the first bridge and system manufacturers beginning with the implementation of IEC 61162-450 and IEC 61162-460.
IEC 61162-460:2024 is an updated add-on to IEC 61162-450. This standard extends the informative guidance given in Annex D of IEC 61162-450:2011. The third edition was published in April 2024.
Known devices with -450 implementation:
*
*
*
*
*
*
*
*
*
*
*
Known devices/systems with -460 implementation: