IBM 729


Image:IBM [729 Tape Drives.nasa.jpg|thumb|280px|A bank of IBM 729 tape drives]
[Image:Tapesticker.jpg|thumb|Reel of tape showing beginning-of-tape reflective marker]
The IBM 729 Magnetic Tape Unit was IBM's tape mass storage system from the late 1950s through the mid-1960s. Part of the IBM 7-track family of tape units, it was used on late 700, most 7000 and many 1400 series computers. Like its predecessor, the IBM 727 and many successors, the 729 used magnetic tape up to long wound on reels up to diameter. To allow rapid tape acceleration, long vacuum columns were placed between the tape reels and the read/write heads to absorb sudden increases in tape tension which would otherwise break the tape. Write protection was provided by a removable plastic ring in the back of the tape reel.

Data format

The tape had seven parallel tracks, six for data and one to maintain parity. Tapes with character data were recorded in even parity. Binary tapes used odd parity. Aluminum strips were glued several feet from the ends of the tape to serve as physical beginning and end of tape markers. Write protection was provided by a removable plastic ring in the back of the tape reel. A 3/4 inch gap between records allowed the mechanism enough time to stop the tape. Initial tape speed was 75 inches per second and recording density was 200 characters per inch, giving a payload transfer speed of 90 kbit/s. Later 729 models supported 556 and 800 characters/inch and 112.5 in/s. At 200 characters per inch, a single 2400-foot tape could store the equivalent of some 50,000 punched cards.
The 729 series was superseded by 9-track tape drives introduced with the IBM System/360.

Models

[file:Camp Smith, Hawaii. PFC Patricia Barbeau operates a tape-drive on the IBM 729 at Camp Smith. - NARA - 532417.jpg|thumb|PFC Patricia Barbeau operates an IBM 729 at Camp Smith, Hawaii, in 1969]