Honda VT250
The VT250 or Spada MC20 is a Honda motorcycle built between late 1988 and the end of 1989.
The VT250 Spada used Nissin brakes, Enkei wheels and a Showa rear-shock. The model was principally marketed in Asia, Australia and New Zealand. Following the VT250 Spada, the Honda VTR250 was produced, which had a trellis frame in place of the cast aluminium frame.
Predecessor
The VT250F is a semi-faired, sport bike first produced by Honda in 1982.The motorcycle had a DOHC 4-valve-per-cylinder, 90-degree water-cooled V-twin engine, which significantly reduced primary vibration when compared to inline twin engines used on similar machines. The V-twin engine also allowed the motorcycle to have a low centre of gravity and a low seat height.
The front brake was a single inboard ventilated disc that was developed to improve brake performance and feel. This was only seen on Honda models for a few years, before a switch to sintered metal brake pads with the more traditional disc/caliper arrangement. Other features included a hydraulic clutch, Comstar wheels with tubeless tyres, TRAC anti-dive front forks and Pro-Link rear suspension. Engine coolant passed through one of the frame tubes. The early UK specification model had built-in front fairing indicators, and optional radiator side-cowls and belly pan. Following the VT250F, the VT250 Spada and VTR250 were produced.
Successor
The Honda VTR250 is a 90° V-twin motorcycle produced by Honda that has so far had one major revision. The original VTR250 was a faired model sold only in the US and Canada from 1988 to 1990. The current model VTR250 is a naked bike, produced from 1997 to the present, available only in the Asia-Pacific region, and for 2009, Europe.The Honda Interceptor VTR250 was sold only in the United States from 1988 to 1990, with moderate changes occurring over the three model years. With a four-stroke liquid-cooled DOHC V-twin engine and a six-speed transmission, VTR250 was the smallest of Honda's Interceptor line of motorcycles.
The 1990 model had a 17-inch front wheel and the front disc brakes were external.