HMS Scorpion (1863)
HMS Scorpion was an ironclad turret ship built by John Laird Sons & Company, at Birkenhead, England. She was one of two sister ships secretly ordered from the Laird shipyard in 1862 by the Confederate States of America.
Her true ownership was concealed by the fiction that she was being built as the Egyptian warship El Tousson. She was to have been named CSS North Carolina upon delivery to the Confederacy. Her sister was built under the false name El Monassir and was to have been renamed CSS Mississippi. In October 1863, a few months after their launch and before they could be completed, the UK Government seized the two ironclads.
In 1864 the Admiralty bought them and commissioned them into the Royal Navy: El Tousson as HMS Scorpion and El Monassir as. Scorpion had a long Royal Navy career, until she was lost in the North Atlantic in 1903.
Design and description
North Carolina and her sister were intended, together with other warships, to break the Federal blockade of Confederate coastal cities and to hold some Northern cities for ransom. The ships had a length between perpendiculars of, a beam of, and a draught of at deep load. They displaced. The hull was divided by 12 watertight bulkheads and the ships had a double bottom beneath the engine and boiler rooms. Their crew consisted of 152 officers and ratings.The Scorpion-class ships had two horizontal direct-acting steam engines, built by Lairds, each driving a single propeller shaft, using steam provided by four tubular boilers. The engines produced a total of which gave the ships a maximum speed of. The ships carried of coal, enough to steam at. They were barque-rigged with three masts. The funnel was made semi-retractable to reduce wind resistance while under sail.
No ordnance had been ordered by the Confederates before the ships were seized in 1863, but in British service they mounted a pair of 9-inch rifled muzzle-loading guns in each turret. The guns could fire both solid shot and explosive shells. According to Parkes, going from full depression to full elevation supposedly took one hour in smooth water and with an even keel!
The Scorpion-class ships had a complete waterline belt of wrought iron that was thick amidships and thinned to at the bow and at the stern. It completely covered the hull from the upper deck to below the waterline. The armour protection of the turrets was quite elaborate. The inside of the turret was lined with of iron boiler plate to which T-shaped beams were bolted. The space between the beams was filled with of teak. This was covered by an iron lattice thick that was covered in turn by of teak. The iron plates were bolted to the outside using bolts that ran through to the interior iron "skin". The area around the gun ports was reinforced by 4.5-inch plates to give a total thickness of 10 inches. The turret roof consisted of T-shaped beams covered by iron plates.