Getrag F28/6 transmission


The Getrag F28/6 is a 6-speed manual transmission built by Getrag and fitted to the C20LET 2.0L Turbo Opel Calibra.

Features

The F28/6 was designed to follow a transverse oriented C20LET engine feeding the front wheels with an outlet to facilitate a driveshaft to feed the rear wheels as well. If the four-wheel drive system is disengaged, the gearbox feeds the front wheels. Conversion kits are available from aftermarket suppliers to convert the 6-speed transmission to suit a front-wheel drive vehicle, and this is a common upgrade amongst owners of the C20XE and X20XEV Calibras.
Clutch diameter
1st gear ratio3.57:1
2nd gear ratio2.16:1
3rd gear ratio1.45:1
4th gear ratio1.10:1
5th gear ratio0.89:1
6th gear ratio0.74:1
Reverse gear ratio3.23:1
Final drive ratio3.72:1
3.70:1

Designation

One interpretation of Opel's gearbox numbering designation is that it refers to the ft·lbf torque capacity, in this case a torque limit. Instead it may be related to the engine size.
GM transmissions are usually numerically designated in Newton-meters. For example the 6-speed M32 gearbox was fitted to the Opel/Vauxhall Astra VXR H and has a torque rating of . The maximum torque output of the Astra VXR engine is limited to.

Nomenclature

The letter F stands for front-wheel-drive; Although the F28 is only used in 4WD applications, the base transmission still remains a common FWD gearbox. The number 28 stands for the maximum torque capacity in Newton-meters divided by 10; therefore, 28 means that the transmission is capable of transferring nominal torque to the input shaft.