Fremantle line
The Fremantle line is a suburban railway and service in Western Australia that connects the central business district of Perth with Fremantle.
History
The railway on which the service runs opened on 1 March 1881 as the first suburban railway line in Perth by William Robinson. It originally operated as the Eastern Railway and ran between Fremantle and Guildford, via central Perth. In March 1884, the railway line was extended via Midland Junction to Bellevue and later to Clackline, York and Northam. The railway line opened as a single track with a passing loop at Claremont, it was duplicated in 1896/97. A dedicated freight line was later added on the western side between Cottesloe and the Leighton Marshalling Yard.On 22 October 1898, the railway line was extended south to Robbs Jetty, on 1 July 1903 via Cockburn to Coogee and on 19 December 1955 via Woodman Point to Kwinana. The Coogee to Woodman Point section closed on 16 September 1973, followed by Robbs Jetty to Coogee in February 1986.
In July 1926, the Fremantle Railway Bridge over the Swan River was partly washed away in a flood, with one line restored in October 1926 and the second in April 1928.
In the 1960s, as part of the standard gauge project, the section south of Cockburn was replaced by the Kwinana line on a different alignment. One of the lines north of Cockburn to the container terminal at North Quay and Leighton Marshalling Yard was converted to standard gauge. The Fremantle Railway Bridge was converted to dual gauge. A marshalling yard was built at Robbs Jetty.
In 1966, the eastern railway metropolitan passenger services were curtailed to terminate at Midland.
Passenger services on the Fremantle line were suspended on 1 September 1979. The decision was based on three one day counts in 1971, 1975 and 1977. The Liberal government of Charles Court planned to convert the railway reserve into a busway, citing figures which showed a loss of $1.14 per passenger-journey on trains versus a loss of $0.26 per passenger-journey on buses. The closure of the line was opposed by Friends of the Railway, which submitted a petition of 100,000 signatures and prepared a 98-page report arguing for its retention. The railway was kept in working order despite the closure, initially because narrow gauge freight trains still used it to access Fremantle, there being no other narrow gauge access to the port. Later when a narrow gauge link was constructed from Cockburn to North Fremantle, trade unions had placed a ban on working on dismantling any track or equipment. The service was reinstated on 29 July 1983 following a change of government which saw Brian Burke and the Australian Labor Party come to power. During the closure of the rail line, patronage dropped by 30%.
For the staging of the 1987 America's Cup, stations south of Fremantle were erected for use by special trains at The Esplanade, Success Harbour and South Beach. The Hotham Valley Railway operated a daily service on this section of the line with a W class steam locomotive as the Spinnaker Run between October 1986 and February 1987. The narrow and standard gauge lines were rebuilt as a single dual gauge line at the same time. Having been disused since 1987, the three stations were demolished in September 2018.
During 1990, work commenced on building a new North Fremantle station, north of its original location, which opened for service on 28 July 1991. Leighton station, which was further north, was demolished during the electrification of the line. Regular electric services started in September 1991. Today there are 17 stations on the line.
As part of the Subi Centro project, Subiaco station and of the line were sunk in 1998. Between 2011 and 2014, the Fremantle line was sunk between Lake Street and the Horseshoe Bridge in the Perth CBD to allow for the redevelopment of the area. Perth station's former Fremantle to Midland platform became an island platform, with an additional platform and track built on the north side. Platforms west of the Horseshoe Bridge were demolished. In June 2011 a $237 million cost blow-out was revealed, added to a 2009 project estimate of $500 million.
The new tunnel was the first in Western Australia to use a rigid overhead conductor rail instead of overhead wires, the same system as used on the Madrid Metro. With overhead wires, the clearance between the new tunnel and the existing Yanchep line tunnel is only. The new tunnel could be built to a smaller diameter by using a conductor rail, allowing for an increased clearance between the two. The new tunnel opened on 18 July 2013.
With the privatisation of Westrail in 2000, responsibility for the Perth to South Beach section passed to the Public Transport Authority and the South Beach to Cockburn Junction section to Arc Infrastructure, although operational responsibility for the standard gauge line is with Arc Infrastructure.
A new rail bridge over the Swan River in Fremantle has been suggested to be built in future. It will carry the Fremantle line, with the existing bridge retained for use by freight trains to Fremantle Harbour.
Services
operate services on the line from Fremantle through the Perth CBD to Midland on the Midland line. Freight services operate from Kewdale and Forrestfield to North Quay. Until July 2015 these were operated by Aurizon when SCT Logistics took over.Stopping patterns
Legend — Stopping Patterns- ● – All trains stop
- ◐ – Some services do not stop
- | – Trains pass and do not stop
Rolling stock
Patronage
Below is the annual patronage of Fremantle railway line from 2010 to 2011 financial year. Figures are provided as total boardings, which includes all fare-paying boardings and free travel on stations within the free transit zones as well as transfers between stations. The figures for rail replacement and special events services are not included in the total.Description
During hot weather, the tracks can distort. As a result, train speeds are reduced by approximately when the air temperature is above, and by an additional when the air temperature is above.The Transperth network currently uses fixed block signalling and automatic train protection, which stops trains that pass a red signal and slows trains that drive too fast. These systems will be replaced by an automatic train control system, likely a communications-based train control system.