Ford Duratorq engine


The Ford Duratorq engine, commonly referred to as Duratorq, is the marketing name of a range of Ford diesel engines introduced in 2000. The larger capacity 5-cylinder units use the Power Stroke branding when installed in North American-market vehicles. The first design, codenamed "Puma" during its development, replaced the older Endura-D unit which had been around since 1984. Commercial versions of the Puma unit replaced Ford's older "2.5Di" type unit used in the Transit, and many other manufacturers' vehicles - most notably the London Taxi and in the Land Rover Defender. Other unrelated units in this range have been developed by Ford and PSA. The TDCi Duratorq engines are available in vehicles from Ford, Jaguar, Land Rover, Volvo and Mazda.
The new EcoBlue diesel engine range, originally codenamed "Panther" and planned to be available in 2.0- and 1.5-litre variants, progressively replaced the Duratorq engines from 2016.

Engine reference

DLD

The inline-four engines are sold under the Duratorq TDCi name by Ford, and as the HDi by Citroën and Peugeot. These are part of the DLD family. Mazda also uses the DLD engine in the Mazda2 and the Mazda3, calling it the MZ-CD or CiTD. The Ford/PSA joint-venture for the production of the DLD was announced in September, 1998.
Officially, there are two families of engines in the range:
  • The 1.4L is generally non-intercooled
  • The 1.5L derived from the 1.6L
  • The 1.6 L always intercooled
Ford later added their unrelated 1.8 L DLD-418 engine to the DLD family, though it is properly part of the Ford Endura engine family.

1.4 "Tiger"

The Duratorq DLD-414 is a inline-four Turbo-Diesel. Output is at 4500 rpm and at 2000 rpm. This engine was developed in Trémery by Peugeot, as described in the joint-venture agreement with Ford. This engine is built in France, UK and India.
The DV4 is available in two versions:
In 2012, Ford added the 1.5-litre, closely derived from the 1.6-litre engine. Bore was reduced from 75 to 73.5 mm while the stroke remained unchanged 88.3 mm.

1.6 "Tiger"

The DLD-416 is a version also used by Ford, Mazda, Volvo, Mini, Peugeot and Citroën. This particular engine was designed by Peugeot engineers on behalf of PSA and Ford.

1.8 "Lynx"

The Duratorq DLD-418 is a intercooled common rail diesel engine. It is completely unrelated to the 1.4/1.6 units, and is a development of Ford's 1.8 8v Endura-D engine that saw service through the 1980s and 1990s. However, Ford considers it part of the DLD family, as evidenced by the official "DLD" name.
The Endura-D was heavily revised and updated with a variable-vane turbocharger and a Delphi high-pressure common rail injection system and relaunched in 2001 as the 'DuraTorq TDCi', with the original engine being rebadged 'DuraTorq TDDi'.
This engine, possibly known within Ford as "Kent Diesel", is the last evolution of the 997 cc petrol engine introduced in the 105E Anglia in 1959.

ZSD ("Puma")

Codenamed Puma during development, these Ford 2.0 L, 2.2 L, and 2.4 L engines are called ZSD. They are produced at the company's Dagenham plant in east London.
Note: the 2.5 and 3.0L "W" engines in above table are NOT Puma engines. They are Mazda designed commercial Diesel engines with no commonality to Puma. The "W" engine family is used in the Asia Pacific Ranger and Everest models currently running out.

2.0

Released in 2000, to coincide with the launch of the Mk3 Ford Mondeo, the Duratorq ZSD-420 was initially available as a direct injection turbodiesel. Producing and it was a vast improvement over the 1.8 Endura-D powering the Mk2 Mondeo. It featured a 16-valve cylinder head with twin chain driven camshafts and utilised a variable-geometry turbocharger with overboost function.
In late 2001 the engine was fitted with Delphi common rail fuel injection and called the Duratorq TDCi, with the original unit being renamed the Duratorq TDDi. Although generally identical to the original engine, the addition of the common rail system meant power was increased to, with torque rising to. In 2002 the Duratorq TDDi was replaced by a detuned version of the Duratorq TDCi. Producing and, this unit used a fixed geometry turbocharger in place of the variable geometry unit used in the TDDi and TDCi.
With 2005 came another detuned version of the TDCi for the Mondeo. Producing and, this engine was substantially cheaper than other versions and was mainly targeted at fleet buyers.
Applications:
  • Ford Transit 2.0 TDDi & TDCi 75, 85, 100 PS 125
  • 2000-2002 Ford Mondeo 2.0 TD & TDDi, and
  • 2001-2007 Ford Mondeo 2.0 TDCi 130, and
  • 2002-2007 Ford Mondeo 2.0 TDCi 115, and
  • 2005-2007 Ford Mondeo 2.0 TDCi 90, and
  • 2003-2009 Jaguar X-Type 2.0d, and DSWDD

    2.2

In 2004, Ford introduced the Duratorq ZSD-422, a turbodiesel for top-of-the-range versions of the Mondeo and Jaguar X-Type which produced. This is unrelated to the PSA DW12 2.2 unit used in Peugeot and Citroën applications.
Applications:
The Duratorq ZSD-424 is a turbocharged and intercooled Diesel. Output is to and to.
Applications:
  • 2000-2011 Ford Transit
  • 2002-2006 LDV Convoy
  • 2002-2006 London Taxi TXII
  • 2007-2011 Land Rover Defender

    2.5 (Mazda WLC)

Introduced for the Thailand-built 2007 Ford Ranger is a 2.5 L diesel engine. It has a bore and a stroke of. The engine has no commonality to Ford's "Puma" engine or VM Motori. It is a development of the IDI Mazda 2.2L normally aspirated, later 2.5L NA and Turbo and later 2.9L NA, with Bosch common-rail direct injection and a variable geometry turbocharger. The WLC engine code is a Mazda engine code, not being changed for use in the Mazda B-Series clone Ford Ranger. It produces at 3500 rpm and at 1800 rpm.

3.0 (Mazda WEC)

A 3.0L Mazda W-engine similar to the 2.5 is also used in the 2007 Ranger as the top of the range. Displacement is increased with a wider bore of and longer stroke of. It produces at 3200 rpm and at 1800 rpm.
The W-engine family remains a Mazda engine and has no commonality to "Puma"

3.2

The 3.2 is an inline, 5-cylinder engine used in the Ford Transit, the Ford Ranger, Ford Everest, Mazda BT-50, Troller T4 and the Vivarail D-Train. For the North American-spec Transit, the 3.2L Duratorq is modified to meet American and Canadian emissions standards and is branded as a Power Stroke engine. The 3.2 Power Stroke is rated at and, and the DuratorqTDCi, available in Asia and Europe, has a power rating of at 3,000 rpm and a torque rating at between 1,750 and 2,500 rpm.

2005 TDCi (PSA DW Based)

Continuing the Ford/PSA diesel engine joint-venture, these straight-four engines are sold under the Duratorq TDCi name by Ford, and as the HDi by Citroën and Peugeot. A development of the existing DW10/DW12 engine, the new engines have a traditional belt-driven system, moving away from the chain-driven camshafts of the previous generation TDCi engines. Both engines utilise common rail diesel technology and are the result of the fourth phase of the cooperation between PSA and Ford.
Both engines utilise all-new, third-generation common rail injection systems. The 2.0 engines utilising a system from Siemens and the 2.2 a system from Bosch. In both systems the injection pressure has been increased to. This higher injection pressure, associated with new piezo-electric injectors in which each nozzle is equipped with seven apertures, allows the number of injections to be multiplied and ensures meticulous uniformity of the diesel injection spray pattern. As a result of this optimised air/diesel mix, combustion is more complete and more uniform, and therefore reduces emissions at source.

2.0 (PSA DW10 Based)

The engine was released to Ford models in 2005 Ford Focus, and followed in the 2007 Mk IV Mondeo. It features a 16-valve cylinder head with twin belt driven camshafts and utilises a variable geometry turbocharger with overboost function. An intercooler is always present, as opposed to some applications of its predecessor.
In the 2005 Focus, engine power output is ; and in the 2007 Mondeo it is offered with or, mated to a manual or 6-speed Aisin TF81 automatic gearbox. In early 2010 this 2.0 unit was updated, as well as the existing version, a new with of torque was added to the range.
Applications:
  • 2003-present Ford Focus C-Max 2.0 TDCi, and
  • 2005-present Ford Focus 2.0 TDCi, and
  • 2006-present Ford S-Max 2.0 TDCi, and
  • 2006-present Ford S-Max 2.0 TDCi, and
  • 2006-present Ford Galaxy 2.0 TDCi, and
  • 2006-present Ford Galaxy 2.0 TDCi, and
  • 2015–present Ford Galaxy 2.0 TDCi, and
  • 2007-2014 Ford Mondeo 2.0 TDCi, and
  • 2007-2010 Ford Mondeo 2.0 TDCi, and
  • 2008-present Ford Kuga 2.0 TDCi, and
  • 2008-2013 Ford Kuga 2.0 TDCi, and
  • 2010-2014 Ford Mondeo 2.0 TDCi, and
  • 2014-2018 Ford Mondeo 2.0 TDCi, and
  • 2014-2018 Ford Mondeo 2.0 TDCi, and
  • 2015-2018 Ford Mondeo 2.0 TDCi, and
Other Applications:
In April 2008 Ford fitted this engine to the Mk IV Mondeo, soon following in the Ford S-Max and Ford Galaxy. The engine was re-engineered and built by PSA in Tremery. It features a 16-valve cylinder head with twin belt driven camshafts and utilises a variable geometry turbocharger with overboost function, rather than the twin turbo approach of Peugeot and Citroën. The result is with of torque, although is temporarily available thanks to the transient overboost function. Land Rover used this engine in the Freelander 2 and Range Rover Evoque.
In 2010 Ford and PSA revised the engine with a new turbocharger and a new power output of with a torque of and at overboost conditions while the emissions are at Euro 5 level.
Applications:
  • 2008-2010 Ford Mondeo 2.2 TDCi, and
  • 2008-2015 Ford S-Max 2.2 TDCi, and
  • 2008-2015 Ford Galaxy 2.2 TDCi, and
  • 2010-2015 Ford Mondeo 2.2 TDCi, and
Other applications: