Ferrari V10 engine
manufactured a series of 3.0-litre, naturally-aspirated, V10 racing engines, exclusively for their Formula One race cars, between and. They chose a V10 engine configuration, because it offered the best compromise between power and fuel efficiency; the V12 was more powerful but less efficient while the V8 was less powerful but more economical. They switched to 2.4-litre naturally-aspirated V8 engine configuration for.
Over its decade-long evolution, power levels varied; from at 15,500 rpm in 1996, to over 900 horsepower, around at 19,000 rpm, toward the end of the season. The Tipo 05 series of engines, produced between 2001 and 2005, was officially stated to produce between at 17,800 rpm, and at 18,300 rpm. In qualifying mode, these engine were reputed to develop up to, or at times over, at 19,000 rpm.
First generation: ''Tipo 04x'' engine (1996–2000)
Tipo 046/046/2 (1996–1997)
This Tipo 046 engine is notable for being the first to use the then more conventional V10 engine format, because a V10 engine offered the best compromise between power and fuel efficiency; the V12 was powerful but thirsty while the V8 was weaker but economical. The engine was also called the 310. It was engineered by former Honda technician Osamu Goto. The engine is a 75-degree V10; and produces 715 hp at 15,550 rpm. The engine itself weighs.Specifications
Weight: 120 kgEngine Configuration: 75° V10
Bore: 90mm
Stroke: 47.1mm
Valves: 4 per cylinder
Displacement: 2998.1 cc
No. of revolutions: Max. 16,000–17,000 rpm
Power: ~
Power/liter: 238 hp/L
Tipo 047/B/C (1998)
The 3-litre Ferrari Tipo 047 V10 engine and designed around a narrower track as mandated by the FIA in a series of regulation changes for that season. The engine itself is an 80-degree V10; which makes at 17,300 rpm.Specifications
Weight: 120 kgEngine Configuration: 80° V10
Bore: 92mm
Stroke: 45.08mm
Valves: 4 per cylinder
Displacement: 2996.7 cc
No. of revolutions: Max. 17,300 rpm
Power:
Power/liter: 269 hp/L
Tipo 048/B/C (1999)
The Tipo 048/B/C engine is an 80-degree, 3.0-litre V10 engine, manufactured by Ferrari. The engine itself was designed by Giles Simon; who lead the engine design and operations. It produces 790 BHP at 16,300 rpm, and won Ferrari their first World Constructors' championship in 20 years.Specifications
Weight: 048/114 kg, 048B/107 kg, 048C/105 kgEngine Configuration: 80° V10
Bore: 94mm
Stroke: 43.19mm
Valves: 4 per cylinder
Displacement: 2997.3 cc
Power: ~ at 16,300 rpm
Power/liter: 263 hp/L
Tipo 049 (2000)
lead the engine design procedure and operations of the Tipo 049. The engine was newly designed, with a wider V-angle ; this new wider angle improved and lowered the centre of gravity of the car that it powered. The engine produced between 805 and 815 hp at 17,300 rpm.Specifications
Weight: 106 kgEngine Configuration: 90° V10
Bore: 96mm
Stroke: 41.4mm
Valves: 4 per cylinder
Displacement: 2996.6 cc
No. of revolutions: Max. 17,300 rpm
Power: ~
Power/liter: 272 hp/L
Exhaust: Two outlet pipes
Installation position: Mid-engine, rear, longitudinal
Second generation: ''Tipo 05x'' engine (2001–2005)
Tipo 050 engine (2001)
The Ferrari Tipo 050 engine was designed by Gilles Simon. It is a 90-degree V10; which produces at 17,300 rpm in race mode. However, the engine can be tuned to produce up to 900 horsepower in qualifying trim. The whole engine unit weighs 94 kg.Tipo 051 engine (2002)
The Ferrari Tipo 051 racing engine was used in the 2002 Formula 1 season. The V10 engine was developed under engine chief Paolo Martinelli.The Type 051 was a new development but based on the architecture of its predecessor, the Tipo 050. All the main components have been revised. The engine block was made using a refined micro-casting technology. The cylinder heads were downsized and the crankcase modified so that the crankshaft was lowered, giving the vehicle an exceptionally low center of gravity. Associated components have been redesigned to reduce rotating masses and friction.
Ferrari also developed a new transmission for the new engine. The new case is significantly smaller, stiffer, and made from a lightweight titanium alloy, making it around 15% lighter than its predecessor. Along with the lighter internals and new clutchless direct shift technology, this resulted in smoother and faster shifting. Prototypes of this transmission were already on the test bench in September 2001. In this way, the team was able to ensure that, despite all the innovations, it was reliable right from the start.
The engine management came as before from Magneti Marelli, Shell supplied the fuel.
The Tipo 051 was used by Ferrari in the 2002 season on the F2002. Sauber used this engine in the Sauber C22 in the 2003 season. However, Sauber used the name PETRONAS 03A for the engine.
Ferrari officially specified 835 hp at 17,800 rpm. In qualifying mode, however, the engine developed up to 900 hp at 19,000 rpm. In order to ensure durability, the performance in the race was reduced. There it delivered up to 865 hp at 18,600 rpm. With this power, the Type 051 was considered one of the most powerful engines in the field and was only surpassed by the P81 used by BMW Williams. This made up to 940 hp, but was less reliable than the Type 051.
In the course of the season, there were two further expansion stages, type 051B/C.
Specifications
Weight: 95 kgEngine Configuration: 90° V10
Bore: 96mm
Stroke: 41.4mm
Valves: 4 per cylinder
Displacement: 2996.6 cc
No. of revolutions: Max. 17,800 rpm
Power: ~
Power/liter: 279 hp/L
Exhaust: Two outlet pipes
Installation position: Mid-engine, rear, longitudinal
Giles Simon and Paolo Martinelli led the engine's design and operations. The 3.0-litre Tipo 051 V10 engine produced at 17,800 rpm in race trim. In qualifying mode, however, the engine developed up to at 19,000 rpm. The engine had a very low centre of gravity, but to ensure durability and reliability, the engine performance was reduced during the race. Thus, the Tipo 051 was capable of producing, and revving to a maximum of 18,600 rpm, all while having excellent handling. The new 051 engine was not the strongest engine of 2002, only being beaten out by the BMW P81 engine used by the Williams team ; but it was lighter, more compact, very fuel-efficient, and very driveable. An innovative and very small clutchless gearbox allowing ultra-quick changes had been designed, and because the unit was so small, the rear end aerodynamics were extremely tightly packaged. Bridgestone developed special tyres, suited specifically for the car.
Tipo 052 engine (2003)
The Ferrari Type 052 racing engine was used in the 2003 Formula 1 season. The V10 engine was developed under engine chief Paolo Martinelli.The Tipo 052 was used by Ferrari in the 2003 season. Ferrari contested the first four races of the season with the previous year's car, the F2002. The Type 052 was not used until the fifth race with the debut of the F2003-GA. This was because the F2003-GA's chassis was designed around the engine.
The Tipo 052 was a completely new development. Ferrari essentially pursued two goals when developing the Tipo 052. On the one hand, the performance and drivability of the engine should be improved without impairing the reliability of the predecessor. On the other hand, the engine should be even better adapted to the design of the chassis in order to achieve better weight distribution. The team also hoped that the improved integration would result in weight savings of 4-5 percent and improved aerodynamics at the rear of the car. In addition to better integration, new materials also resulted in weight savings.
Engine management was by Magneti Marelli.
The specification used at the beginning of the season delivered around 200 revolutions per minute more than the predecessor Type 051.
During the season there were the usual expansion stages. Even though Ferrari officially stated an output of 845 hp at 18,300 rpm, experts suspected an output of 900 hp at up to 19,000 rpm.
Paolo Martinelli, assisted by Giles Simon, lead the engine design and operations. The Tipo 052 engine was a developed versions of the previous model. The 3.0 L V10 engine produced at 18,300 rpm
Weight: 85 kg
Engine Configuration: 90° V10
Valves: 4 per cylinder
Displacement: 2996.6 cc
No. of revolutions: 18,300 rpm
Power/liter: 282 hp/L
Exhaust: Two outlet pipes
Power:
Installation position: Mid-engine, rear, longitudinal
Tipo 053 engine (2004)
The Ferrari Tipo 053 racing engine was used in the 2004 Formula 1 season. The V10 engine was developed under engine chief Paolo Martinelli.Type 053 is a completely new development. The engine rules introduced for the 2004 season required that each engine last an entire race weekend. An illegal engine change would have resulted in a grid penalty of 10 places. That is why Ferrari focused on durability and reliability when developing the 053. To achieve this goal, all moving parts have been redesigned. The weight increased only slightly compared to the predecessor Type 052, which is partly due to the use of new alloys. The engine management came from Magneti Marelli.
For the fourth year running, Technical Director and Paolo Martinelli, assisted by Giles Simon, lead the engine design and operations. The engine powered the highly successful Ferrari F2004, that was driven by Michael Schumacher and Rubens Barrichello, and gave Schumacher his fifth and final World Championship with Ferrari at the Belgian Grand Prix, and his seventh Formula One World Championship overall. The engine was now designed in accordance with the FIA's new technical regulations for the season, and had to last a full race weekend. The engine now produced at 18,300 rpm in race trim, and around at 19,000 rpm in qualifying mode. The engine also now weighed only 92 kg.
The Type 053 was only used in the 2004 season and only by Ferrari on the F2004 and Sauber on the Sauber C23. However, Sauber used the name PETRONAS 04A for the engine.
For the San Marino Grand Prix, there was the first stage of development that delivered 920 hp.