Parker Solar Probe
The Parker Solar Probe is a NASA space probe launched in 2018 to make observations of the Sun's outer corona.
It used repeated gravity assists from Venus to develop an eccentric orbit, approaching within 9.86 solar radii from the center of the Sun. At its closest approach in 2024, its speed relative to the Sun was or 191 km/s, which is 0.064% the speed of light. It is the fastest object ever built on Earth.
The project was announced in the fiscal 2009 budget year. Johns Hopkins University Applied Physics Laboratory designed and built the spacecraft, which was launched on 12 August 2018. It became the first NASA spacecraft named after a living person, honoring physicist Eugene Newman Parker, professor emeritus at the University of Chicago.
On 29 October 2018, at about 18:04 UTC, the spacecraft became the closest ever artificial object to the Sun. The previous record, from the Sun's surface, was set by the Helios 2 spacecraft in April 1976. At its perihelion on 27 September 2023, the PSP's closest approach was, reaching this distance again on 29 March 2024.
On 24 December 2024 at 11:53 UTC, PSP made its closest approach to the Sun, coming to a distance of 6.1 million km from the surface. Its beacon signal was received on 26 December, showing that it had survived the passage through the corona. Detailed telemetry was received 1 January 2025.
In 2025, the teams from NASA, Johns Hopkins, and partners were awarded the 2024 Collier Trophy for their achievements.
History
The Parker Solar Probe concept originates in the 1958 report by the Fields and Particles Group, Committee 8 of the National Academy of Sciences' Space Science Board, which proposed several space missions including "a solar probe to pass inside the orbit of Mercury to study the particles and fields in the vicinity of the Sun".Studies in the 1970s and 1980s reaffirmed its importance, but it was always postponed due to cost. A cost-reduced Solar Orbiter mission was studied in the 1990s, and a more capable Solar Probe mission served as one of the centerpieces of the Outer Planet/Solar Probe program formulated by NASA in the late 1990s. The first three missions of the program were planned to be: the Solar Orbiter, the Pluto and Kuiper belt reconnaissance Pluto Kuiper Express mission, and the Europa Orbiter astrobiology mission focused on Europa.
The original Solar Probe design used a gravity assist from Jupiter to enter a polar orbit which dropped almost directly toward the Sun. While this explored the important solar poles and came even closer to the surface, the extreme variation in solar irradiance made for an expensive mission and required a radioisotope thermal generator for power. The trip to Jupiter also made for a long mission, years to first solar perihelion, 8 years to second.
Following the appointment of Sean O'Keefe as Administrator of NASA, the entirety of the OPSP program was canceled as part of President George W. Bush's request for the 2003 United States federal budget. Administrator O'Keefe cited a need for a restructuring of NASA and its projects, falling in line with the Bush Administration's wish for NASA to refocus on "research and development, and addressing management shortcomings".
In the early 2010s, plans for the Solar Probe mission were incorporated into a lower-cost Solar Probe Plus. The redesigned mission uses multiple Venus gravity assists for a more direct flight path, which can be powered by solar panels. It has a higher perihelion, reducing the demands on the thermal protection system.
In May 2017, the spacecraft was renamed the Parker Solar Probe in honor of astrophysicist Eugene Newman Parker, who had proposed the existence of nanoflares as an explanation of coronal heating as well as having developed a mathematical theory that predicted the existence of solar wind. The solar probe cost NASA US$1.5 billion. The launch rocket bore a dedication in memory of APL engineer Andrew A. Dantzler who had worked on the project.
A memory card containing names submitted by over 1.1 million people was mounted on a plaque and installed below the spacecraft's high-gain antenna. The card also contains photos of Parker and a copy of his 1958 scientific paper predicting important aspects of solar physics.
Spacecraft
The Parker Solar Probe is the first spacecraft to fly into the low solar corona. It will assess the structure and dynamics of the Sun's coronal plasma and magnetic field, the energy flow that heats the solar corona and impels the solar wind, and the mechanisms that accelerate energetic particles.The spacecraft's systems are protected from the extreme heat and radiation near the Sun by a solar shield. Incident solar radiation at perihelion is approximately, or 475 times the intensity at Earth orbit. The solar shield is hexagonal, mounted on the Sun-facing side of the spacecraft, in diameter, thick, and is made of two panels of reinforced carbon–carbon composite with a lightweight carbon foam core, which is designed to withstand temperatures outside the spacecraft of about. The shield weighs only and keeps the spacecraft's instruments at.
A white reflective alumina surface layer minimizes absorption. The spacecraft systems and scientific instruments are located in the central portion of the shield's shadow, where direct radiation from the Sun is fully blocked. If the shield was not between the spacecraft and the Sun, the probe would be damaged and become inoperative within tens of seconds. As radio communication with Earth takes about eight minutes in each direction, the Parker Solar Probe has to act autonomously and rapidly to protect itself. This is done using four light sensors to detect the first traces of direct sunlight coming from the shield limits and engaging movements from reaction wheels to reposition the spacecraft within the shadow again. According to project scientist Nicky Fox, the team described it as "the most autonomous spacecraft that has ever flown".
The primary power for the mission is a dual system of solar panels. A primary photovoltaic array, used for the portion of the mission outside, is retracted behind the shadow shield during the close approach to the Sun, and a much smaller secondary array powers the spacecraft through closest approach. This secondary array uses pumped-fluid cooling to maintain operating temperature of the solar panels and instrumentation.
Trajectory
The Parker Solar Probe mission design used repeated gravity assists at Venus to incrementally decrease its orbital perihelion to achieve a final altitude of approximately 8.5 solar radii, or about. The spacecraft trajectory included seven Venus flybys over nearly seven years to gradually shrink its elliptical orbit around the Sun, for a total of 24 orbits. The near Sun radiation environment was predicted to cause spacecraft charging effects, radiation damage in materials and electronics, and communication interruptions, so the orbit is highly elliptical with short times spent near the Sun.The trajectory required high launch energy, so the probe was launched on a Delta IV Heavy launch vehicle and an upper stage based on the Star 48BV solid rocket motor. Interplanetary gravity assists provided further deceleration relative to its heliocentric orbit, which resulted in a heliocentric speed record at perihelion. As the probe passed around the Sun in December 2024, it achieved a velocity of or 191 km/s in the heliocentric ecliptic reference frame, which temporarily made it the fastest human-made object, almost three times as fast as the previous record holder, Helios-2.
Launch injection was very close to predictions, but nevertheless required path correction. Trajectory was re-optimized after the launch to save fuel. The first Venus flyby was only 52 days after the launch; three trajectory correction maneuvers were performed in this window.
As described by Kepler's laws of planetary motion, which apply to any object in an orbit, gravity will cause the spacecraft to accelerate as it nears perihelion, then slow down again afterward until it reaches its aphelion. Because of its highly elliptical orbit and the Sun's strong gravity, this effect is particularly pronounced for the Parker Solar Probe. During a perihelion on September 27, 2023, the spacecraft traveled at 394,736 miles per hour, fast enough to fly from New York to Tokyo in just over a minute.
Final orbit, possible extensions and end of mission
The PSP performed its final gravity assist on November 6, 2024. It set the spacecraft on a new orbit passing 6.1 million kilometers from the surface of the Sun. A beacon transmission was made and received successfully on December 20 to confirm that the craft was operating normally ahead of the perihelion. The exact time of closest approach was 11:53 UTC on December 24 but the craft was out of contact at this time. A further beacon transmission confirming successful passage was received on December 26.This final orbit is inside the orbit of Venus and so no further encounters with that planet are planned. PSP will continue in this orbit but requiring adjustment to maintain attitude so that its transmitters point at Earth. Eventually its thrusters will run out of fuel and full functioning will not then be possible. The plan is to then rotate the craft so that its instruments will be exposed to the full radiance of the Sun for the first time. This is expected to ablate and destroy them. The heat shield will remain and is expected to continue to orbit the Sun for millions of years.
PSP's mission can be extended beyond main mission that will end in 2025. Currently discussed plan is "to complete the solar cycle at the 9.86 Rs perihelion distance".
Instruments
Parker Solar Probe has four main instruments:- FIELDS. The instrument suite captures the scale and shape of electric and magnetic fields in the Sun's atmosphere. FIELDS measures waves and turbulence in the inner heliosphere with high time resolution to understand the fields associated with waves, shocks and magnetic reconnection, a process by which magnetic field lines explosively realign. FIELDS measures the electric field around the spacecraft with five antennas, four of which stick out beyond the spacecraft's heat shield and into the sunlight, where they experience temperatures of. The antennas are made of a niobium alloy, which can withstand extreme temperatures. FIELDS measures electric fields across a broad frequency range both directly and remotely. Operating in two modes, the four sunlit antennas measure the properties of the fast and slow solar wind — the flow of solar particles constantly streaming out from the Sun. The fifth antenna, which sticks out perpendicular to the others in the shade of the heat shield, helps make a three-dimensional picture of the electric field at higher frequencies. The suite also has three magnetometers to assess the magnetic field. A search coil magnetometer, or SCM, measures how the magnetic field changes over time. Two identical fluxgate magnetometers, MAGi and MAGo, measure the large-scale coronal magnetic field. The fluxgate magnetometers are specialized for measuring the magnetic field further from the Sun where it varies at a slower rate, while the search coil magnetometer is necessary closer to the Sun where the field changes quickly, as it can sample the magnetic field at a rate of two million times per second. The Principal Investigator is Stuart Bale at the University of California, Berkeley.
- IS☉IS. The instrument uses two complementary instruments to measure particles across a wide range of energies. By measuring electrons, protons and ions, IS☉IS will understand the particles' lifecycles — where they came from, how they became accelerated and how they move out from the Sun through interplanetary space. The two energetic particle instruments on IS☉IS are called EPI-Lo and EPI-Hi. EPI-Lo measures the spectra of electrons and ions and identifies carbon, oxygen, neon, magnesium, silicon, iron and two isotopes of helium, He-3 and He-4. Distinguishing between helium isotopes will help determine which of several theorized mechanisms caused the particles' acceleration. The instrument has a design with an octagonal dome body supporting 80 viewfinders. Multiple viewfinders provide a wide field of view to observe low-energy particles. An ion that enters EPI-Lo through one of the viewfinders first passes through two carbon-polyimide-aluminum foils and then encounters a solid-state detector. Upon impact, the foils produce electrons, which are measured by a microchannel plate. Using the amount of energy left by the ion's impact on the detector and the time it takes the ions to pass through the sensor identifies the species of the particles. EPI-Hi uses three particle sensors composed of stacked layers of detectors to measure particles with energies higher than those measured by EPI-Lo. The front few layers are composed of ultra-thin silicon detectors made up of geometric segments, which allows for the determination of the particle's direction and helps reduce background noise. Charged particles are identified by measuring how deep they travel into the stack of detectors and how many electrons they pull off atoms in each detector, a process called ionization. At closest approach to the Sun, EPI-Hi will be able to detect up to 100,000 particles per second. The Principal Investigator is David McComas at Princeton University.
- WISPR. These optical telescopes acquire images of the corona and inner heliosphere. WISPR uses two cameras with radiation-hardened Active Pixel Sensor CMOS detectors. The camera's lenses are made of a radiation hard BK7, a common type of glass used for space telescopes, which is also sufficiently hardened against the impacts of dust. The Principal Investigator is Russell Howard at the Naval Research Laboratory.
- SWEAP. This investigation will count the electrons, protons and helium ions, and measure their properties such as velocity, density, and temperature. Its main instruments are the Solar Probe Analyzers and the Solar Probe Cup. SPC is a Faraday cup, a metal device that can catch charged particles in a vacuum. Peeking over the heat shield to measure how electrons and ions are moving, the cup is exposed to the full light, heat and energy of the Sun. The cup is composed of a series of highly transparent grids — one of which uses variable high voltages to sort the particles — above several collector plates, which measure the particles' properties. The variable voltage grid also helps sort out background noise, such as cosmic rays and photoionized electrons, which could otherwise bias the measurements. The grids, located near the front of the instrument, can reach temperatures of, glowing red while the instrument makes measurements. The instrument uses pieces of sapphire to electrically isolate different components within the cup. As it passes close to the Sun, SPC takes up to 146 measurements per second to accurately determine the velocity, density and temperature of the Sun's plasma. SPAN is composed of two instruments, SPAN-A and SPAN-B, which have wide fields of view to allow them to see the parts of space not observed by SPC. Particles encountering the detectors enter a maze that sends the particles through a series of deflectors and voltages to sort the particles based on their mass and charge. While SPAN-A has two components to measure both electrons and ions, SPAN-B looks only at electrons. The Principal Investigator is Justin Kasper at the University of Michigan and the Smithsonian Astrophysical Observatory.
Mission
The Parker Solar Probe was launched on 12 August 2018, at 07:31 UTC. The spacecraft operated nominally after launching. During its first week in space it deployed its high-gain antenna, magnetometer boom, and electric field antennas. The spacecraft performed its first scheduled trajectory correction on 20 August 2018, while it was 8.8 million kilometers from Earth, and travelling atInstrument activation and testing began in early September 2018. On 9 September 2018, the two WISPR telescopic cameras performed a successful first-light test, transmitting wide-angle images of the background sky towards the Galactic Center.
The probe successfully performed the first of the seven planned Venus flybys on 3 October 2018, where it came within about of Venus in order to reduce the probe's speed and orbit closer to the Sun.
Within each orbit of the Parker Solar Probe around the Sun, the portion within 0.25 AU is the Science Phase, in which the probe is actively and autonomously making observations. Communication with the probe is largely cut off in that phase. Science phases run for a few days both before and after each perihelion. They lasted 11.6 days for the earliest perihelion, and will drop to 9.6 days for the final, closest perihelion.
Much of the rest of each orbit is devoted to transmitting data from the science phase. But during this part of each orbit, there are still periods when communication is not possible. First, the requirement that the heat shield of the probe be pointed towards the Sun sometimes puts the heat shield between the antenna and Earth. Second, even when the probe is not particularly near the Sun, when the angle between the probe and the Sun, as seen from Earth, is too small, the Sun's radiation can overwhelm the communication link.
After the first Venus flyby, the probe was in an elliptical orbit with a period of 150 days, making three orbits while Venus makes two. After the second flyby, the period shortened to 130 days. After less than two orbits, only 198 days later, it encountered Venus a third time at a point earlier in the orbit of Venus. This encounter shortened its period to half of that of Venus, or about 112.5 days. After two orbits it met Venus a fourth time at about the same place, shortening its period to about 102 days.
After 237 days, it met Venus for the fifth time and its period was shortened to about 96 days, three-sevenths that of Venus. It then made seven orbits while Venus made three. The sixth encounter, almost two years after the fifth, shortened its period down to 92 days, two-fifths that of Venus. After five more orbits, it met Venus for the seventh and last time, decreasing its period to 88 or 89 days and allowing it to approach closer to the Sun.
Timeline
| Year | Date | Event | Perihelion distance | Speed | Orbital period | Notes |
| Year | Date | Event | Flyby altitude over Venus | Leg of Parker's orbit | Inside/Outside orbit of Venus | Notes |
| 2018 | 12 August 07:31 UTC | Launch | 151.6 | – | 174 | |
| 2018 | 3 October 08:44 UTC | Venus flyby #1 | 2548 km | Inbound | Inside | Flybys 1 and 2 occur at the same point in Venus's orbit. |
| 2018 | 6 November 03:27 UTC | Perihelion #1 | 95 | 150 | Solar encounter phase 31 October – 11 November | |
| 2019 | 4 April 22:40 UTC | Perihelion #2 | 95 | 150 | Solar encounter phase 30 March – 10 April | |
| 2019 | 1 September 17:50 UTC | Perihelion #3 | 95 | 150 | Solar encounter phase 16 August – 20 September | |
| 2019 | 26 December 18:14 UTC | Venus flyby #2 | 3023 km | Inbound | Inside | Flybys 1 and 2 occur at the same point in Venus's orbit. |
| 2020 | 29 January 09:37 UTC | Perihelion #4 | 109 | 130 | Solar encounter phase 23 January – 29 February | |
| 2020 | 7 June 08:23 UTC | Perihelion #5 | 109 | 130 | Solar encounter phase 9 May – 28 June | |
| 2020 | 11 July 03:22 UTC | Venus flyby #3 | 834 km | Outbound | Outside | Flybys 3 and 4 occur at the same point in Venus's orbit. |
| 2020 | 27 September | Perihelion #6 | 129 | 112.5 | ||
| 2021 | 17 January | Perihelion #7 | 129 | 112.5 | ||
| 2021 | 20 February | Venus flyby #4 | 2392 km | Outbound | Outside | Flybys 3 and 4 occur at the same point in Venus's orbit. |
| 2021 | 28 April | Perihelion #8 | 147 | 102 | First perihelion to enter the solar corona | |
| 2021 | 9 August | Perihelion #9 | 147 | 102 | ||
| 2021 | 16 October | Venus flyby #5 | 3786 km | Inbound | Inside | Flybys 5 and 6 occur at the same point in Venus's orbit. |
| 2021 | 21 November | Perihelion #10 | 163 | 96 | ||
| 2022 | 25 February | Perihelion #11 | 163 | 96 | ||
| 2022 | 1 June | Perihelion #12 | 163 | 96 | ||
| 2022 | 6 September | Perihelion #13 | 163 | 96 | ||
| 2022 | 11 December | Perihelion #14 | 163 | 96 | ||
| 2023 | 17 March | Perihelion #15 | 163 | 96 | ||
| 2023 | 22 June | Perihelion #16 | 163 | 96 | ||
| 2023 | 21 August | Venus flyby #6 | 3939 km | Inbound | Inside | Flybys 5 and 6 occur at the same point in Venus's orbit. |
| 2023 | 27 September | Perihelion #17 | 176 | 92 | ||
| 2023 | 29 December | Perihelion #18 | 176 | 92 | ||
| 2024 | 30 March | Perihelion #19 | 176 | 92 | ||
| 2024 | 30 June | Perihelion #20 | 176 | 92 | ||
| 2024 | 30 September | Perihelion #21 | 176 | 92 | ||
| 2024 | 6 November | Venus flyby #7 | 317 km | Outbound | Outside | |
| 2024 | 24 December | Perihelion #22 | 192 | 88 | ||
| 2025 | 22 March | Perihelion #23 | 192 | 88 | ||
| 2025 | 19 June | Perihelion #24 | 192 | 88 | ||
| 2025 | 15 September | Perihelion #25 | 192 | 88 | ||
| 2025 | 12 December | Perihelion #26 | 192 | 88 |
Findings
On November 6, 2018, Parker Solar Probe observed its first magnetic switchbacks – sudden reversals in the direction of the magnetic field carried by the solar wind. They were first observed by the NASA-ESA mission Ulysses, the first spacecraft to fly over the Sun's poles. The switchbacks generate heat that warms solar corona.On 4 December 2019, the first four research papers were published describing findings during the spacecraft's first two dives near the Sun. They reported the direction and strength of the Sun's magnetic field, and described the unusually frequent and short-lived changes in the direction of the Sun's magnetic field. These measurements confirm the hypothesis that Alfvén waves are the leading candidates for understanding the mechanisms that underlie the coronal heating problem. The probe observed approximately a thousand "rogue" magnetic waves in the solar atmosphere that instantly increase solar wind speeds by as much as and in some cases completely reverse the local magnetic field.
They also reported that, using the "beam of electrons that stream along the magnetic field", they were able to observe that "the reversals in the Sun's magnetic field are often associated with localized enhancements in the radial component of the plasma velocity ". The researchers found a "surprisingly large azimuthal component of the plasma velocity. This component results from the force with which the Sun's rotation slingshots plasma out of the corona when the plasma is released from the coronal magnetic field".
PSP discovered evidence of a cosmic dust-free zone of 3.5 million miles radius from the Sun, due to vaporisation of cosmic dust particles by the Sun's radiation.
On April 28, 2021, during its eighth flyby of the Sun, Parker Solar Probe encountered the specific magnetic and particle conditions at 18.8 solar radii that indicated that it penetrated the Alfvén surface; the probe measured the solar wind plasma environment with its FIELDS and SWEAP instruments. This event was described by NASA as "touching the Sun".
On 25 September 2022, the first discovery of a comet was made in images from the Parker Solar Probe. The comet is named PSP-001. It was found by Peter Berrett, who participates in the NASA funded Sungrazer project. PSP-001 was discovered in images from 29 May 2022, part of the spacecraft's 12th approach to the Sun.
Since this discovery, a further 19 sungrazing comets have been discovered in the images taken by the Parker Solar Probe, including three non-group comets.
| Designation | Comet classification | Image date | Discovery date | Discoverer |
| PSP-001 | Kreutz | 29 May 2022 | 25 Sep 2022 | Peter Berrett |
| PSP-002 | Kreutz | 1 Sep 2022 | N/A | Karl Battams |
| PSP-003 | Kreutz | 2 Sep 2022 | N/A | Karl Battams |
| PSP-004 | Kreutz | 1 Sep 2022 | N/A | Karl Battams |
| PSP-005 | Kreutz | 18 Nov 2021 | 11 Feb 2023 | Peter Berrett |
| PSP-006 | Non Group | 11 Dec 2022 | 13 May 2023 | Peter Berrett |
| PSP-007 | Kreutz | 12 Mar 2023 | 12 Jul 2023 | Karl Battams |
| PSP-008 | Non Group | 6 Dec 2022 | 16 Jul 2023 | Rafał Biros |
| PSP-009 | Kreutz | 25 Apr 2021 | 28 Jul 2023 | Rafał Biros |
| PSP-010 | Kreutz | 25 Apr 2021 | 28 Jul 2023 | Rafał Biros |
| PSP-011 | Kreutz | 17 Nov 2021 | 24 Jul 2023 | Rafał Biros |
| PSP-012 | Kreutz | 21 Feb 2022 | 30 Jul 2023 | Rafał Biros |
| PSP-013 | Kreutz | 15 Feb 2022 | 27 Jul 2022 | Peter Berrett |
| PSP-014 | Kreutz | 4 Aug 2021 | 3 Aug 2023 | Rafał Biros |
| PSP-015 | Kreutz | 5–6 Aug 2021 | 3 Aug 2023 | Rafał Biros |
| PSP-016 | Kreutz | 29 May 2022 | 4 Aug 2023 | Rafał Biros |
| PSP-017 | Kreutz | 12 Jan 2021 | 16 Aug 2023 | Robert Pickard |
| PSP-018 | Kreutz | 19 Jun 2023 | 13 Oct 2023 | Peter Berrett |
| PSP-019 | Non Group | 27 Sep 2023 | 2 Nov 2023 | Guillermo Stenborg |
| PSP-020 | Kreutz | 13 Jan 2021 | 8 Aug 2023 | Peter Berrett |
In 2024, it was reported that the probe detected a Kelvin-Helmholtz instability during an observed coronal mass ejection. It is the first spacecraft that detected this long theorized event.
Collaborations
The PSP and ESA-NASA Solar Orbiter missions cooperated to trace solar wind and transients from their sources on the Sun to the inner interplanetary space.In 2022, PSP and SolO planners collaborated to study why the Sun's atmosphere is "150 times hotter" than its surface. SolO observed the Sun from 140 million kilometers, while PSP simultaneously observed the Sun's corona during flyby at a distance of nearly 9 million kilometers.
In March 2024, both space probes were at their closest approaches to the Sun, PSP at 7.3 million km, and SolO at 45 million km. SolO observed the Sun, while PSP sampled the plasma of the solar wind, allowing scientists to compare data from both probes.
Coordinated observations were also done with SOHO and STEREO-A spacecraft.