Ford Performance Vehicles


Ford Performance Vehicles was the performance arm for Ford Australia. It was a Melbourne-based joint venture between Prodrive and Ford Australia. The company produced a range of Ford-based models from 2002 to 2014 under the FPV marque.
WWW Official Site

History

Ford Australia first partnered with the English automotive engineering company Tickford in 1991, with the joint venture Tickford Vehicle Engineering. In 2002, following Prodrive's purchase of Tickford, Ford Performance Vehicles was formed as a joint venture between Ford Australia and Prodrive.
In 2003, the FPV GT, GT-P and Pursuit released with the 5.4-litre Boss 290 V8 engine at The GT being based on the Falcon (BA)|BA Falcon], while the GT-P was based on the BA Fairmont. The Pursuit was based on the BA Falcon coupe utility
In October 2004, FPV released BA mkII-based models, introducing the Super Pursuit as a luxury coupe utility, powered by the Boss 290, and the FPV F6 Typhoon and Tornado, powered by the turbocharged 4.0-litre straight-six Barra 270T engine at.
The BF Falcon-based FPV models released in 2005, the power Boss 290 for the GT and Barra 270T engine for the F6 were unchanged. In October 2006, the BF MkII series the luxury Force 6 and Force 8 were introduced, based on the F6 and GT, retaining the same engines respectively, the leather interiors were optionally in red or black upholstery, with the models competing with the Holden Special Vehicles Senator.
In 2008, FPV introduced the Ford Territory-based FPV F6X. The F6X included a Turbocharged Ford Barra engine at, the F6X was discontinued in 2009.
The FG Falcon-based FPV models released in 2008, with the Force 6 and 8 were replaced by the F6-E and GT-E respectively. The F6 was powered by a turbocharged Barra at. The GT was powered by a Boss 290 at. In 2009 the GS model was introduced with a Boss 302 at, as a sedan and ute. A GT 5th anniversary edition was produced in 2009.
In 2010 the Boss V8 was replaced by the supercharged 5.0-litre Miami V8, available in the GS at and the GT at. A GT Black edition was produced in 2011. The Pursuit was dropped in 2010.
The power of the FG MkII-based FPV models remained unchanged for the December 2011. In 2012 the Pursuit model was brought back as a limited edition model.
The purchase from Prodrive also saw a factory backed V8 Supercar outfit in Ford Performance Racing.
In August 2012, Ford Australia announced its purchase of FPV assets to continue the engineering, manufacturing and marketing of that performance brand in Australia. In preparation for Ford Australia's manufacturing shutdown, the FPV brand and its range were discontinued in 2014, after 12 years of production and marketing.

Nameplates

;F6
;F6X
;Force 6 / Force 8
;GS
;GT
;Pursuit

Model Series

BA

The 2002 BA range included the GT, GT-P, and the Pursuit. The GT was the entry-level vehicle that started with a suggested retail price of A$59,810. The GT-P was the upmarket version of the GT, with a price tag of A$69,850. The Pursuit was a ute version of the GT, featuring the same seats, basic dash/interior package and wheels. A FPV specific body-kit was applied to all cars, using the lights from the XR-range. The kit had a strong resemblance to the BA Falcon V8 Supercar, highlighting the connection to FPR.
All three were powered by a unique version of Ford's 5.4-litre Modular V8, with DOHC 4-valve cylinder heads from the Mustang Cobra R engine. FPV named this uniquely tuned engine as the Boss 290 because of its power output. It produced at 5,500 rpm and of torque at 4,500 rpm.
Featured Models

MkII update

The GT, GT-P and Pursuit received a new stripe package with bonnet decals, a six-speed Tremec T56 manual and the GT-P received 19" five-spoke alloy wheels. FPV also released the Super Pursuit, which was a Pursuit ute with GT-P extras.
New six cylinder sedan and utility models were added to the range, the F6 Typhoon (sedan) and F6 Tornado. The F6 was visually separated from the GT range with the use of a different pattern in the front bumper grille mesh, and a smaller boot spoiler on the sedan. F6 models were powered by FPV's version of the Ford Barra engine, a 4.0 litre DOHC 24-valve turbocharged inline-six with variable cam timing producing at 5,250 rpm and at 2,000 - 4,250 rpm.
Featured Models

BF

This new range was launched in 2005 with engine specifications unchanged. All models shared the same six-speed manual and were now offered with an optional German made ZF six-speed automatic. The GT received the GT-P's old 19-inch wheels, and the GT-P and Super Pursuit received their own specific road wheel styles. Typhoon & Tornado versions had optional 18-inch road wheel design used on the previous model, or a new 19-inch design with black spokes. All models also received new body kits, with the F6 Typhoon benefiting from its own unique styling changes. The F6 now had colour coded fog lamp surrounds, and a lower grill insert emphasizing the intercooler. The rear now had a new bumper with mesh inserts, a deeper diffuser, with the GT models now sporting a dual exit exhaust system cut into the diffuser.
Featured Models

MkII update

No mechanical changes were introduced with this update; however, all models came standard with 19 inch rims. Subtle styling changes were made, but the most significant news was the introduction of new Force 6 and Force 8 models. Built to rival HSV's Senator Signature, they are mechanically identical to the auto-equipped GT model, but in a more luxury-focused package with more conservative visuals. The Force models are essentially an FPV version of the Fairmont Ghia.
In the final months of the BF MkII Falcon, a number of limited edition models were released - namely, the GT "40th Anniversary".; the F6 "R-Spec" Typhoon, which is the only limited edition turbo FPV and the only turbo Rspec ever; the GT "Cobra R-spec" sedan and utility (all of which received stiffer "R-Spec" dampers and, in the case of the sedan, a power increase to
Featured Models
Special editions
  • F6 "R-spec" Typhoon
  • GT "40th Anniversary Edition"
  • GT "Cobra R-spec"

FG

The FG series FPV was launched in 2008, based on the FG Falcon. The Typhoon and Tornado names were dropped for the F6.
4 limited editions GT's were released during the FG series, the first being the GT 5th Anniversary, celebrating 5-years since the start of FPV. The "Black Edition" followed, and the R-Spec and GT-F arriving in the MkII update.
Featured Models
Special editions

MY10 update

In October 2010, the 5.4 L V8 was replaced with the new 5.0 L Supercharged V8. The GT range now produces and the GS. It is capable of a sub 5 second 0–100 km/h time, surpassing the HSV GTS in both power and torque. The decision was brought about because of pressure to convert to Euro IV emissions, which the 5.4 L was unable to pass.
The Pursuit was dropped in 2010.
Featured Models
Special editions

MkII Update

The FPV range received the updates from the Falcon MkII range in December 2011, however, the GS sedan and utility received the cosmetic updates from the XR-series. In 2012 the Pursuit model was brought back as a limited edition model.
FPV released the track focused version of the R-spec in 2012, using the current GT with its / supercharged 5.0-litre V8 engine, creating Australia's fastest accelerating production car.
The GT-F 351 marked the end for the Ford Falcon GT / FPV GT model lines, the "F" standing for Final, and "351" paying homage to Falcon GTs of the 1960s and 1970s. It features a retuned version of the Coyote 5.0 litre V8 to produce, with over available through over-boost when the conditions allow, the GT-F also gain's the handling upgrades from the R-spec. The exterior is identified through black highlights on the mirrors, spoiler and door handles, as well as a unique stripe package including a stripe running over the top of the car.
Featured Models
Special editions
;GT-F "351"
Presented in June 2014, the GT-F 351 is the last Falcon-based GT sedan and last FPV model, with a total production of 500 reserved for Australia at $77,990 and another 50 for New Zealand. Its nomenclature was chosen to mean "F" for final whereas "351" is this GT-F's engine output in kW as well as a homage to the iconic engine capacity of the 1970s GT Falcon. Mechanically, the GT-F features launch control, standard Brembo six-piston front and four-piston rear brakes, the suspension and 275/35 R19 Dunlop Sports Maxx 9in rear tyre package from the limited edition GT R-spec and a retuned version of the supercharged Coyote "Miami" 5.0 L V8 engine developing a minimum of at 6,000 rpm of power but an unchanged at 2,500-5,500 rpm of torque that is, however, available across a broader range. Inside, the GT-F is characterised by darker finishes, orange accents throughout and a build number plate complemented by a certificate. The exterior features stealth or black accents and a unique GT-F stripe package that is available in different colours depending on exterior paints, which are Winter White, Silhouette, Kinetic, Octane and Smoke.
The NSW highway patrol acquired one of these last FPV GT sedans which, as a unique special, had the engine tuned by Ford racing legend Dick Johnson to. This gave it far more power than Australian racing V8 Supercars and it is, as of 2015, Australia's most powerful police vehicle. It was commissioned by the NSW police force as a promotional car, although it is a fully equipped and operational highway patrol police vehicle.
FPV auctioned build number 001 and the last build number 500 on eBay, with a view to donate proceedings to the National Breast Cancer Foundation. These cars were sold for $236,100 and $157,600 and attracted 84 and 106 bids, respectively.

SY

In January 2008, Ford Performance Vehicles unveiled the FPV F6X, a SUV, the first non-Falcon-based model to be produced by FPV, with a turbocharged Barra engine producing and. The F6X was discontinued in 2009.

Concept Cars

;Galaxie 540
During a 2004 FPV open day, FPV had a clay model of a Fairlane on display. It Featured a custom front end with GT headlamps and bonnet, and a custom bodykit.
;Territory P-SUV
For a 2007 open day, FPV had a Territory-based concept on display. The P-SUV had an open rear section behind the rear seats. The floor of the open rear section and its extension was covered in machine finish metal sheets with the same material covering the fold-down rear seat backs.
;GT "Black Edition" concept
For the 2011 Melbourne motor show, FPV displayed the "FLPV concept", based on the just released supercharged GT series. It featured an all-black appearance, and a unique front bumper and staggered wheel design at the time considered to be available on future FPV products. However, these failed to make an appearance, with only the use of wider rear wheels making the R-spec and GT-F limited editions.

Engines

5.4L Modular "Boss" V8

;Boss 290
Based on the cast iron 4V DOHC Boss short blocks sourced from Windsor, Ontario, the Boss engines include some locally sourced parts such as intake and pistons coupled with DOHC 4-valve cylinder heads from the Mustang Cobra R engine. FPV named this uniquely tuned engine as the Boss 290 because of its power output. It produced 290 kW at 5,500 rpm and 520 N·m of torque at 4,500 rpm.
;Boss 302
For the BFII FPV GT Cobra special edition, the Boss 302 was created. The GT Cobra motor produced 405 hp and 398 lb·ft ). The Boss 302 motor was also added to all V8-powered FPV models until the release of the FG in 2008.
;Boss 315
For the FG MkI, the 5.4 was further tuned to produce 315 kW and 551 N·m. FPV achieved this through a new camshaft profile, new camshaft timing, strengthened piston assembly and a higher compression ratio. A 302kw detuned version of this engine was used for the limited edition FPV GS in the FG range..

5.0L Coyote "Miami" V8

In October 2010 FPV retired the 5.4L Boss V8, in favour of a new supercharged 5.0L V8. The project, codenamed "Miami", is based on the Coyote 5.0 litre V8 and is a supercharged alloy quad cam engine. It has cost FPV $40 million and has taken 3 years to develop. The engine was offered in three versions, Boss 315, 335 and finally 351.
With the closure of FPV, the Boss 335 engine was used in the returning XR8 model with the FG-X range. Another variation was developed for the special edition XR8 sprint, that developed.
;Boss 315
Used in the entry level GS sedan and ute, the Boss 315 produces 315 kW at 5,750 rpm and 545 N·m between 2,000 - 5,500 rpm.
;Boss 335
Available in the GT range, the Boss 335 kW between 5,750 - 6,000 rpm and between 2,200 - 5,500 rpm. The latter is offered in the GT range, which includes GT, GT-P, and GT-E. Fuel economy was improved dropping 4.5% to 13.7 L/100 km for the auto and 13.6 L/100 km for the manual.
Boss 345
Exclusive to the FG X XR8 Sprint, the Boss 345 developed 345 kW of power and 575 Nm of torque, with base torque figures being just 1 Nm shy of the XR6 Sprint. In favourable atmospheric conditions, overboost mode raised the output to 400 kW / 650 Nm, being equal with the figures produced by the FPV GT-F. The Boss 345 had the build number inscribed onto the top of the engine, instead of any reference to power figures as with previous iterations.
;Boss 351
This is a specially tuned variant of the 5.0L unique to the GT-F, similar to the Cobra before it, the 351 is a reference to the Cleveland engines offered in the Falcon in the past.

4.0L "Barra" I6

;Barra 270
For the BA/BF F6 Typhoon and Tornado models, the boost from the Garrett GT3540 turbocharger was increased over the Barra 240, producing at 5,250 rpm and of torque at 2,000-4,000 rpm
;Barra 310
With the FG series, the Garret GT3540 was retained as opposed to the smaller GT3576 used in the FG XR6 Turbo. This is the most powerful engine with at 5,250 rpm and of torque at 1,950-5,200 rpm manufactured in Australia. As a result,
;Barra 325
Exclusively fitted to the FGX XR6 Turbo Sprint. It was essentially a Barra 270T with a Garrett GT3540 and revised carbon fibre intake.

Motorsport

V8 Supercars

Ford Performance Racing was created by Prodrive in 2003 to establish a link between the FPV road car range and the Ford Falcon V8 Supercars. Given the team's massive budget, its early results were disappointing but a form reversal in 2006 saw the team finish second in the Teams' standings. Mark Winterbottom also placed second in the Drivers Championship in 2008. In January 2013 the team was sold by Prodrive to Rusty French and Rod Nash. The team achieved their first Bathurst 1000 victory in 2013 with Mark Winterbottom and Steven Richards driving a Falcon FG. In 2015, Ford Performance Racing was renamed as Prodrive Racing Australia as a result of Ford's decision to progressively withdraw its V8 Supercars support by 2016.
FPR drivers have included Craig Lowndes, Glenn Seton, Greg Ritter, David Brabham, David Besnard, Jason Bright, Mark Winterbottom, Steven Richards and Will Davison.

Drifting

FPV created a show car dubbed the 'DRIF6' - an F6 Typhoon with modifications making the car suitable for competitive drifting. The car was entered into the national-level Drift Australia Series in 2006, where it was driven by Adam 'Newtonmeter' Newton. One of the car's main objectives was to expose the FPV brand to a younger audience than its usual, traditional V8-driving crowd.
Apart from Adam Newton, only Gary Myers of Summernats Burnout fame has driven the car. Gary drove the F6 for Street Machine Magazine, and commented the vehicle had incredible power.
The F6 drift car managed to score a best qualifying position of 5th at Mallala Motorsport Park in Adelaide, South Australia. In the Queensland Round of racing, the car suffered damage when Warren Luff, a professional race driver, took to the wheel for a few demo laps. Under Warren's control the car only made the end of the back straight of Queensland Raceway before it was turned passenger side first into the wall and Warren ended up in hospital with a fractured nose.
The damaged vehicle made an appearance in China to bolster one of its sponsors agendas. Ford Australia brought the vehicle back to Australia and it can be seen at the Ford Australia Discovery Centre in Geelong Victoria.