Exhaled breath condensate
Exhaled breath condensate is the exhalate from breath, that has been condensed, typically via cooling using a collection device. EBC reflects changes in the respiratory fluid that lines the airways and is an inexpensive, non-invasive tool that has potential for scientific research. Despite its promises, it has not been proven for screening or diagnosing diseases of the lung and other conditions, yet. It has long been appreciated that the exhaled breath is saturated by water vapour, but using it for studies of the lung was probably first described in the Russian scientific literature.
Overview
Exhaled breath condensate reflects not only the composition of the airway lining fluid and alveoli. EBC may also mix with salivary and gastric droplets. In addition, volatile gases arising from the alveoli, lower and upper airway wall as well as oral cavity dissolve into the exhaled water vapour and influence its pH. The primary constituents of EBC include:- Aerosolised particles of airway lining fluid collected from the airways induced by airflow, probably by turbulence.
- Water vapour condensation produced around the aerosolised particles
- Water-soluble volatile gases dissolved into the water vapor condensate
Increasing evidence indicates that in disease states EBC contains molecules reflective of that disease or greater concentrations of particular markers. For example, patients with gastroesophageal reflux disease have been demonstrated to have pepsin in their EBC. Patients with COPD and asthma have been demonstrated to have increased levels of reactive oxygen species and histamine after bronchial challenge.
The content of exhaled breath condensate, however, is also strongly affected by physiological factors, such as diet, physical exercise and even pregnancy may affect mediator concentrations.
Collection devices
The chemical properties of the collection device will influence the device and its characteristics. Some devices can contaminate the sample, or react with oxidative markers particularly if containing metalsExamples of devices include:
- Simple, custom-made. These include glass tubes cooled by ice, Teflon tubing in ice or in dry-ice or water-cooled glass condensers.
- Refrigeration systems. These allow the regulation of the collection temperature usually within a pre-set range.
- Disposable exhaled breath condensate collector. This device is placed inside a metal sleeve which has been chilled in a freezer. The collection temperature gradually increases as it is used at room temperature. After use the disposable condensation tube inside is then removed from the external metal sleeve and the sleeve is returned to the freezer. Condensate is extracted from the walls of the condensation tube using a plunger and swept into a fluid pool for analysis.