Energy applications of nanotechnology
As the world's energy demand continues to grow, the development of more efficient and sustainable technologies for generating and storing energy is becoming increasingly important. According to Dr. Wade Adams from Rice University, energy will be the most pressing problem facing humanity in the next 50 years and nanotechnology has potential to solve this issue. Nanotechnology, a relatively new field of science and engineering, has shown promise to have a significant impact on the energy industry. Nanotechnology is defined as any technology that contains particles with one dimension under 100 nanometers in length. For scale, a single virus particle is about 100 nanometers wide.
People in the fields of science and engineering have already begun developing ways of utilizing nanotechnology for the development of consumer products. Benefits already observed from the design of these products are an increased efficiency of lighting and heating, increased electrical storage capacity, and a decrease in the amount of pollution from the use of energy. Benefits such as these make the investment of capital in the research and development of nanotechnology a top priority.
Commonly used nanomaterials in energy
An important sub-field of nanotechnology related to energy is nanofabrication, the process of designing and creating devices on the nanoscale. The ability to create devices smaller than 100 nanometers opens many doors for the development of new ways to capture, store, and transfer energy. Improvements in the precision of nanofabrication technologies are critical to solving many energy related problems that the world is currently facing.Graphene-based materials
There is enormous interest in the use of graphene-based materials for energy storage. The research on the use of graphene for energy storage began very recently, but the growth rate of relative research is rapid.Graphene recently emerged as a promising material for energy storage because of several properties, such as low weight, chemical inertness and low price. Graphene is an allotrope of carbon that exists as a two-dimensional sheet of carbon atoms organized in a hexagonal lattice. A family of graphene-related materials, called "graphenes" by the research community, consists of structural or chemical derivatives of graphene. The most important chemically derived graphene is graphene oxide which is usually prepared from graphite by oxidization to graphite oxide and consequent exfoliation. The properties of graphene depend greatly on the method of fabrication. For example, reduction of graphene oxide to graphene results in a graphene structure that is also one-atom thick but contains a high concentration of defects, such as nanoholes and Stone–Wales defects. Moreover, carbon materials, which have relatively high electrical conductivity and variable structures are extensively used in the modification of sulfur. Sulfur–carbon composites with diverse structures have been synthesized and exhibited remarkably improved electrochemical performance than pure sulfur, which is crucial for battery design. Graphene has great potential in the modification of a sulfur cathode for high performance Li-S batteries, which has been broadly investigated in recent years.
Silicon-based nano semiconductors
-based nano semiconductors have the most useful application in solar energy and it also has been extensively studied at many places, such as Kyoto University. They utilize silicon nanoparticles in order to absorb a greater range of wavelengths from the electromagnetic spectrum. This can be done by putting many identical and equally spaced silicon rods on the surface. Also, the height and length of spacing have to be optimized for reaching the best results. This arrangement of silicon particles allows solar energy to be reabsorbed by many different particles, exciting electrons and resulting in much of the energy being converted to heat. Then, the heat can be converted to electricity. Researchers from Kyoto University have shown that these nano-scale semiconductors can increase efficiency by at least 40%, compared to the regular solar cells.Nanocellulose‐based materials
is the most abundant natural polymer on earth. Currently, nanocellulose‐based mesoporous structures, flexible thin films, fibers, and networks are developed and used in photovoltaic devices, energy storage systems, mechanical energy harvesters, and catalysts components. Inclusion of nanocellulose in those energy‐related devices largely raises the portion of materials and is very promising in addressing the relevant environmental concerns. Furthermore, cellulose manifests itself in the low cost and large‐scale promises.Nanostructures in energy
One-dimensional nanomaterials
have shown promise to increase energy density, safety, and cycling-life of energy storage systems, an area in need of improvement for Li-ion batteries. These nanostructures are mainly used in battery electrodes because of their shorter bi-continuous ion and electron transport pathways, which results in higher battery performance.Additionally, 1D nanostructures are capable of increasing charge storage by double layering, and can also be used on supercapacitors because of their fast pseudocapacitive surface redox processes. In the future, novel design and controllable synthesis of these materials will be developed much more in-depth. 1D nanomaterials are also environmentally friendly and cost-effective.
Two-dimensional nanomaterials
The most important feature of two dimensional nanomaterials is that their properties can be precisely controlled. This means that 2D nanomaterials can be easily modified and engineered on nanostructures. The interlayer space can also be manipulated for nonlayered materials, called 2D nanofluidic channels. 2D nanomaterials can also be engineered into porous structures in order to be used for energy storage and catalytic applications by applying facile charge and mass transport.2D nanomaterials also have a few challenges. There are some side effects of modifying the properties of the materials, such as activity and structural stability, which can be compromised when they are engineered. For example, creating some defects can increase the number of active sites for higher catalytic performance, but side reactions may also happen, which could possibly damage the catalyst's structure. Another example is that interlayer expansion can lower the ion diffusion barrier in the catalytic reaction, but it can also potentially lower its structural stability. Because of this, there is a tradeoff between performance and stability. A second issue is consistency in design methods. For example, heterostructures are the main structures of the catalyst in interlayer space and energy storage devices, but these structures may lack the understanding of mechanism on the catalytic reaction or charge storage mechanisms. A deeper understanding of 2D nanomaterial design is required, because fundamental knowledge will lead to consistent and efficient methods of designing these structures. A third challenge is the practical application of these technologies. There is a huge difference between lab-scale and industry-scale applications of 2D nanomaterials due to their intrinsic instability during storage and processing. For example, porous 2D nanomaterial structures have low packing densities, which makes them difficult to pack into dense films. New processes are still being developed for the application of these materials on an industrial scale.