Cairo Metro Line 1


Cairo Metro Line 1 is the first line of the Cairo Metro in Cairo, Egypt. It is the first metro system in Africa and the Middle East. It was constructed in 1987 and connects Helwan with El Marg, stopping at 35 stations. Line 1, sometimes called the French-built line or simply the French line has a total length of with of it being underground and has trains that run with 3 units, which have a frequency of 2.5 minutes and a maximum speed of. The line can carry 60,000 passengers per hour in each direction.

Costs

The Construction of the project started in 1982 after the French government agreed on giving Egypt the necessary loan. The first New Marg - Helwan line costs 1107 million Francs which were converted into Egyptian currency and divided into multiple stages. The total cost of the first stage from Helwan to Ramsis is divided into the following:
  1. for the tunnel between Sayeda Zeinab and Ramsis Square with a length of .
  2. for the movement of 60 km different structures and the improvement of the older railways.
  3. for the creation of a station in Dar El Salam.
The second stage cost in total and connected the railway with the metro. Additional costs were made available as requested by the ministry of transportation:
  1. for completing the line.
  2. for the third stage of the line.
  3. for the line
  4. for the preparation study of the second line Imbaba-El Darasa

Construction

The construction of the Helwan-El Marg line was in two stages.
The first stage was from Helwan to
Sayeda Zeinab and included a tunnel from Helwan to Ramses Square.
First the line from Helwan to Sayeda Zeinab, which is long had the following construction works:
  1. The isolation of the existing railways and the construction of 9 car bridges and 21 people bridges.
  2. The construction of 17 rail lane switcher.
  3. The renovation of the existing railways.
  4. The production of of cables which satisfy the needs of the rail way from Helwan to Sayeda Zeinab.
Second the line from Helwan to Ramses Square, which would be a subterranean and is long. It includes five subterranean stations after the Sayeda Zeinab station:
The Construction of this line consumed the following resources:
  1. of concrete works.
  2. of digging works.
  3. 3900 concrete walls
  4. other digging works.
In 1987 the line from Helwan to Ramses Square was finished and opened for the public. It had a total length of.
The second stage of the Helwan El Marg line included the construction of a line from Ramses Square to El marg, which would be long. The operation of the line was aimed for 1988, but due to some difficulties it started operation in 1989.
The second stage included also:
  1. The conversion of the Marg line to an electric line.
  2. The acquisition of 48 new units, which would make 100 units available for operation.
  3. The improvement of a workstation to provide maintenance works for 204 Units.
  4. The construction of a 220 kilo-Volt power generator, to provide electricity for the future lines.

Connections

To other Metro lines

Line 1 connects to Cairo [Metro Line 2|Line 2] at Al-Shohadaa and Sadat stations and with Line 3 at Nasser station. It will connect to Line 4 at El Malek El Saleh station.

To other forms of transit

Shohadaa Station is immediately next to Ramses Station, providing access to Egyptian National Railways long-haul and short-haul domestic passenger service. Cairo Transport Authority buses and private microbus services are also nearby.
Access to Cairo International Airport is expected via transfer to Line 3 upon completion of Phase 4 in early 2020.

Driving Simulator

A new train driving simulator integrated in Cairo Metro's training center dedicated for Line 1 drivers, which was provided by Transurb Technirail that won the international tender issued by Cairo Metro in December 2011.
Transurb Technirail will provide Cairo Metro with a driving simulator and a computer-assisted learning area to train Line 1 drivers, improving their driving skills and to train them on the elementary functions of the rolling stock and on how to handle malfunctions.