Kawasaki Heavy Industries & CRRC Qingdao Sifang C151C
The Kawasaki Heavy Industries & CRRC Qingdao Sifang C151C is the sixth generation electric multiple unit rolling stock in operation on the existing North–South and East–West lines of Singapore's Mass Rapid Transit system, manufactured by a consortium of Kawasaki Heavy Industries and CRRC Qingdao Sifang under Contract 151C.
Twelve trains were purchased. They were delivered between 2017 and 2019, and were tested before the full service in 2019. The first was delivered on 27 October 2017. The interior design was unveiled on 28 February 2018 at Tuas Depot with two trains showcased. This brought the total number of trains operating on the NSEWL to 198 trainsets, up from the previous 186. The addition tripled the number of trains on the North–South and East–West Lines when they were first opened.
The first three C151C trainsets commenced revenue service on 30 September 2018 on the North–South Line.
Refurbishment
All 92 trains from the KSF fleet, consisting of C151As, C151Bs and C151Cs will undergo refurbishment works from 2026 onwards, and is expected to be completed by the mid-2030s.Tender
The tender for these trains under the contract 151C was closed on 14 May 2015 with three bids. The LTA has shortlisted all of them and the tender results were published on 22 September that year. Kawasaki has won the contract, similar to C151A and C151B.| S/N | Name of tenderer | Amount |
| 1 | CRRC Zhuzhou Locomotive Co., Ltd. | 134,608,695.70 |
| 2 | Kawasaki Heavy Industries, Ltd. / Kawasaki Heavy Industries Pte Ltd & CRRC Qingdao Sifang Consortium | 136,800,000.00 |
| 3 | Hyundai Rotem | 136,799,928.00 |
Design
The C151C was the first and only MRT rolling stock to be fitted with tip-up seats until April 2021 when the second batch of the T251 trains entered service in tandem with the opening of the Thomson–East Coast Line Stage 2.The C151C retains the design and specifications from the earlier C151B trains but sports LTA's new corporate livery already introduced on the C951 trains, incorporating green and red stripes against the black and white background.
The C151C is the second train type to be equipped with STARiS 2.0, which consists of two LCD screens displaying travel information and advertisements. Travel information includes upcoming stations and door closing warnings.
Equipment
Main propulsion controller
The C151C trains are the fifth commuter type Electric Multiple Unit to feature electric systems fully manufactured by Fuji Electric. Propulsion is controlled by VVVF inverter with two-level IGBT semiconductor controller, rated at 415 kV. Each inverter unit controls two motors on one bogie, and one motor car features two such units. Motors are three-phase AC induction type, model MLR120, with a maximum output of.Train formation
The coupling configuration of a C151C in revenue service is DT–M1–M2+M2–M1–DT.The car numbers of the trains range from x701 to x724, where x depends on the carriage type. Individual cars are assigned a four-digit serial number. A complete six-car trainset consists of an identical twin set of one driving trailer and two motor cars permanently coupled together. For example, set 705/706 consists of carriages 3705, 1705, 2705, 2706, 1706, and 3706.
- The first digit identifies the car number, where the first car has a 3, the second has a 1, and the third has a 2.
- The second digit is always a 7.
- The third digit and fourth digit are the train identification numbers. A full-length train of six cars has two different identification numbers. For example, 705/706 or 705/720.
- * Kawasaki and CRRC Qingdao Sifang built sets 701 – 724.