Rail transport in Belgium
Rail transport in Belgium benefits from an extensive rail network. The country is a member of the International Union of Railways. The UIC Country Code for Belgium is 88.
History
On May 5, 1835, the first railway in continental Europe opened between Brussels-Groendreef/Allée verte and Mechelen. Some sort of railroad or canal had been envisaged as early as 1830. The feasibility of a railroad was investigated by engineers Pierre Simons and Gustave De Ridder. The first trains were Stephenson engines imported from Great Britain. The engines were called Pijl meaning Arrow, Olifant meaning Elephant, and 'Stephenson'. They pulled bench-cars and diligences. On the return from Mechelen, the Olifant pulled all 30 cars. By 1840, Ghent, Bruges, Ostend, Antwerp, Mechelen, Brussels and Leuven were connected. The lines that had to reach Liège, Mons and Kortrijk were partially completed. In 1843, when the major East-West/North-South axes were complete, private companies were allowed to construct and use their own rail systems. These were crucial in the industrialisation of the country.In 1870, the Belgian state owned of rail lines, while the private enterprises owned. From 1870 to 1882, the railways were gradually nationalised. In 1912, were state property compared to private lines. Full nationalisation was considered at the time but was not enacted until 1926, when the SNCB was started. It was named the SNCB or NMBS, named in a similar way to the French rail network, SNCF, which was founded 12 years later. In 1958 the network was fully state-owned. On 5 May 1935 the SNCB started with electrification on the line Brussels North to Antwerp Central,.
Infrastructure
In 2003, the network constituted of railways, all of which were standard gauge:. Of all of those railways, were also electrified. Most electrified Belgian lines use a 3 kV DC overhead power supply, but the high speed-lines are electrified at 25 kV AC, as are recent electrifications in the south of the country.Trains in Belgium normally run on the left hand track. This is in contrast to road vehicles, which drive on the right hand side of the road and is evidence of the British involvement in building the rail network in the 19th century.
The railway network is controlled and maintained by Infrabel.
Policy
Belgium operates a policy of cheap rail travel. Citizens in Belgium, especially students and older citizens, are offered incentives and cheaper fares in order to alleviate congestion on the nation's roads. Public sector employees are entitled to a free or heavily subsidised season ticket for commuting by rail. Many private sector employers will make a contribution to the cost of a season ticket. Smoking is prohibited in all railway stations, and all tracks since January 2023, and passenger cars.Rail links with adjacent countries
All adjacent countries use the same standard gauge.- Netherlands - different voltage 3 kV DC/1500 V DC. The change of voltage occurs south of Roosendaal, and between the Dutch stations of Eijsden and Maastricht Randwijck; monovoltage 3 kV Belgian trains proceed under reduced power to the first large station past the border. Border crossings are at:
- * Essen, Visé
- * Meer
- * Hamont, Lanaken and Zelzate
- * Eisden
- * Achel
- * Sint-Gillis-Waas, Turnhout
- Germany - different voltage 3 kV DC/15 kV AC. The change of voltage occurs in Aachen station where there is a switchable track so that 3 kV monovoltage trains can reach Aachen. Change of voltage also on the Moresnet viaduct on the freight only line Visé - Montzen - Aachen West. Border crossings are at:
- * Welkenraedt
- * Kelmis-Hergenrath
- * Losheimergraben, Raeren, Gemmenich and Gemmenich.
- * Steinebrück,
- Luxembourg - different voltage 3 kV DC/25 kV AC. All Belgian lines going to the grand-duchy of Luxembourg use 25 kV 50 Hz long before the border so there is no voltage change. Border crossings are at:
- * Arlon - Sterpenich - Kleinbettingen
- * Gouvy - Troisvierges
- * Athus or Aubange - Rodange
- * Lengeler, Benonchamps, Lommersweiler
- France - different voltage 3 kV DC/25 kV AC. The change of voltage occurs at the border, except for the high-speed line which is 25 kV throughout and as mentioned below. Border crossings are at:
- * Mouscron - Tourcoing
- * Tournai - Froyennes - Blandain
- * Quiévrain
- * Quévy - Feignies
- * Erquelinnes - Jeumont
- * Aubange - Mont-Saint-Martin
- * high speed line at Esplechin
- * Adinkerke to Dunkirk track in situ, line closed to passengers and freight
- * Momignies the track has been taken off in favor of a cycle track
- * Heer-Agimont : track in situ, line closed to passengers and freight. Part of the line from Dinant used to be the site of a tourists' steam train, but no more in exploitation.
- * Menen, Comines-Warneton, Leupegem, Antoing, Péruwelz, Dour, Doische
- United Kingdom - using HSL 1, LGV Nord, the Channel Tunnel and the High Speed 1/Channel Tunnel Rail Link is 25 kV AC. All rail transport between Belgium and the UK transits through France.