Anderson Committee
The Anderson Committee, formally, "Advisory Committee on Traffic Signs for Motorways", was a 1957 government committee formed to design signs for the new motorway network under development. A system was needed that could be easily read at high speed. The Committee published its final report, Traffic Signs for Motorways, in 1962.
Committee
The Committee's informal name came from its chairman, Sir Colin Anderson, chairman of the P&O.Two graphic designers were commissioned to design the system of signage: Jock Kinneir and his assistant Margaret Calvert. In October 1958, the Committee presented an interim report to the Minister of Transport, Harold Watkinson. This report was not published.
Impact
Overall recommendations
The Committee came to several findings the design of signage for motorways. Signage should consist of mixed case letters, only capitalizing the first letters of sentences. This deviated from the designs of prior road signs and the then regulations in effect, Traffic Signs Regulations, 1957. This decision was based off research in the United States for traffic signs used on the new Interstate Highway System, a limited-access dual carriageway network similar to motorways. While there was objections to this concept in public, the Committee concluded thatThe use of blue with white text/symbols colour scheme was decided on for several reasons. A dark background with light lettering was decided upon due to its ease of reading, especially at night when illuminated. By using a distinct colour from the black and white signs being used on all-purpose roads, a driver is informed by the sign's colour that they are interacting with a motorway when approaching from a all-purpose road. While green was considered, following American design practice, the Committee settled upon blue for backgrounds as it had better contrast against greenery near motorways and blue was already in use in multiple European countries, and using it would maintain a consistency for motorists.
Illumination of signage by bottom mounted floodlights was recommended as best practice over top mounted lighting, which resulted in irregular illumination. Reflectorizing signs was recommended as the second best option, where it was simply impracticable to use electric lighting, as reflective signage had diminished performance when using dipped headlamps, which was often necessary due to opposing traffic. There were also minor issues noted about loss of contrast and reflectorised material not appearing as a 'pure white', but these issues were deemed minor.
To identify motorways, the Committee considered an existing symbol adopted by the Economic Commission for Europe. The Committee disliked the design, finding it poor at identifying at a distance, difficult to impossible to incorporate with other signage. In its place, the Committee proposed a circular symbol, which was tested on the Preston Bypass
The Committee also considered if it was possible to modify the E.C.E. symbol to make it more suitable, and came up with modified design, however were still unsatisfied with the design. It was also suggested that no symbol be adopted, relying on the colour scheme alone, which was trialed on the newly opened London-Yorkshire Motorway.
The Committee ultimately left it to the Ministry of Transport to decide on a final symbol design, which would ultimately be the modified E.C.E. symbol.
The handling of place names on signs was a point of considerable concern and consideration. The Committee felt it was important to minimize the number of place names on any one sign, as names both contribute to excessive size of signs and difficulty in easily reading and understand signs at high speed. It was recommended that ideally, advanced direction signs for slip roads should have no more than three place names, and signage identifying the possible destinations that could be reached via a particular motorway not exceed four under normal circumstances. The Committee also proposed that abbreviating place names was likely necessary due to the long lengths of some locations, such as Birmingham, Northampton and Wellingborough. While it could prove unpopular with impacted areas, it was in the best interest of design and drivers. The Committee did caution that overuse of abbreviations could reduce the effectiveness of using lowercase lettering improved readability over capital letters.
Adoption
The recommendations of the Anderson Committee would be implemented by the Traffic Signs Regulations and General Directions 1964, which would also see the incorporation of the recommendations of Worboys Committee, tasked with reviewing traffic signs for all-purpose roads. The signs adopted largely followed the design principals laid out, however using straight lines, rather than the curved, dispensing with the red and white symbol in favor of the Worboys Committee recommendation of a red border, white background and black symbol for warning signs.The sign for cloverleafs, depicting two slip roads would not appear until 1975.
Legacy
The Anderson Committee's recommendations were not accepted by all. David Kindersley published an article in Traffic Engineering & Control in December 1960, disagreeing with the concept of using mixed-case lettering instead of capital letters as well as the large signs of signs. Further, he wrote Later research revealed a mixed conclusion, the currently used, all capital font, MOT Serif was superior in a specific format: signs with narrow spacing between each line and the edge of the sign. However, on larger signs, where text was not close to edges or other text and there was space, no advantage was found using MOT Serif.The signage proposed by the Anderson Committee would be further revised and updated in 1975, by the Traffic Signs Regulations and General Directions 1975. In the 1975 Regulations, Sign 901.1 indicting the 'commencement of Motorways Traffic Regulations' was updated to a simple design consisting of the Committees revised version of the E.C.E symbol and the motorway route number, eliminating the large list of traffic to be excluded from the motorway. Additionally, the revised symbol was added to directional route and place name signs. The 1975 Regulations also introduced an updated 'end of motorway regulations' sign for use at junctions: the modified E.C.E. symbol with a red diagonal bar through it.
Recommended signs
These were some of the new motorway signs proposed by the Anderson Committee in 1962.Motorway regulation signs
Due to the new nature of motorways, and the fact they were not intended for certain types of common traffic, the Committee deemed it necessary to state on the sign marking the start of the motorway, what traffic was prohibited. It was their goal that when the public becomes more familiar with motorways, that the large, wordy signs would be phased out.Advance Direction signs
The Committee also made recommendations regarding the posting of signage on all-purpose roads for directing traffic to the motorways, as well as near and at junctions interacting with slip roads onto motorways. Simple signage directing traffic to motorway was to be posted or further away. A specific sign was designed incorporating two roundabouts, for situations where two separate roundabouts formed an junction onto the motorway. During observation of drivers on the Preston Bypass, it was observed that drivers were reluctant to pass through the first roundabout to reach the second one, potentially unaware of the next roundabout's existence, resulting in navigational errors.Junction signs
Slip roads
To inform drivers leaving the motorway, the Committee recommended a three sign approach, first sign at, the second sign at a half-mile, and the final sign at the start of the deceleration lane of the slip road. The provision of markers signalling the distance to the start of the deceleration, with them placed at intervals of was also recommended.Junctions of two motorways
On approach to junctions with other motorways, guidance on placement of signs is similar to standard slip roads, but using moIn situations where motorways converge, signage was recommended to advise drivers of the merger, the rectangular blue sign at a half-mile before the merger, and the red triangular sign at the merger.
In situations where a separation, a traffic island, is being used at the merger point, the 'Traffic island - Don't change lane' sign was to be used.