Abarth 205A Berlinetta
The Abarth 205A Berlinetta was a coupé sports car, also known as the Abarth 205A Monza built by Austrian born tuning expert Carlo Abarth in 1950. It was a development of the Abarth Cisitalia 204A but with a new platform chassis, still using the engine and other components from the Fiat 1100 B/E. Only three 205As were finished in 1950; chassis numbers 101, 102, and 103, but an additional car was built in 1953 with an extravagant Ghia body. Slow sales meant that for the next few years Abarth chose to focus on building his exhaust and tuning business, allowing competition and car manufacturing take a backseat. In 1955, the 205A was succeeded by the 207A Spyder and its derivatives.
Design
Just like the Cisitalia 202 and 204, the 205A continued to use a pushrod 1.1-liter engine derived from the Fiat 1100. These cars have confusingly sometimes been referred to as "Abarth 204A Berlinetta," but the 205's platform chassis was actually a new design. The Michelotti-designed body used on the first three cars was made from aluminium.Chassis 101
The first model of this type was manufactured in March 1950 and was first campaigned on March 26, 1950, during the Inter-Europe Cup run at the Monza Autodrome. With Guido Scagliarini, driver and associate of Carlo Abarth, at the wheel, they won their category. This car also took part of the 1950 Mille Miglia, where it did not finish. Carrying starting number 533, it was fitted with temporary nose and tail extensions for improved aerodynamics, made by in-house coachbuilder Giuseppe Manera.The engine in this car is a Fiat 1100 B engine fitted with a Cisitalia head, a dry sump, two Weber carburetors, and producing about. This car is currently in the O'Sullivan Square Museum in San Diego.
Chassis 102
This car, which has chassis number 102, is in fact the third and last example made. It differs in a number of ways, mainly the result of having a wheelbase rather than the original's. It is presumed that this car was intended for the personal use of Carlo Scagliarini, brother of the driver and partner of Carlo Abarth, after it was retired from competition. The engine was similar to the one installed in chassis 101, although this unit was tuned by S.I.R.C.A. of Milano.The just finished, still unpainted car competed at the 1950 Mille Miglia, where it carried starting number 630. Driver Carlo Scagliarini and co-driver Luigi Garrone managed a 31st place at the finish. It was also in the entry list as a "Sirca-Fiat" or "Abarth 205 Sirca" for the 1951 Mille Miglia. It was to be driven by Hermann Lothaller and Karl Anzenbacher and was issued number #231, but did not start the race.
Chassis 103
The most fully developed design, chassis number 103 is the second example built in spite of carrying the final chassis number. Unlike the first chassis, intended solely for competition, this was aimed at small series production for a wealthy clientele and was thus luxuriously appointed. This benefitted from a slight increase in the displacement of the Fiat 1100 engine from 1,089 to, but with power reduced to DIN thanks to a lower state of tune.Its official presentation took place at the Turin Motor Show in May 1950. The Michelotti-bodied Ferrari 166 Inter, presented in September 1950, was very similar, although larger in size, and marketed at about the same price. Both models were from the same designer and body shop, which did not favor the relationship between the two business leaders. The Ferrari's distinctly better performance meant that the 205A found no further takers.