AMC 20


The AMC Model 20 is an automotive axle manufactured by American Motors Corporation and AM General.

General specifications

The AMC 20 is a carrier-tube axle, which is where the axle tubes press into the housing, and the cover is bolted to the rear. They have an ring gear and use a 29 spline axle shaft. The differential cover is round with twelve bolts, making it one of the easiest axles to identify. Most AMC 30 rear axles use a tube, and the gasket shape is round with almost the same height and width is stronger but does not have as much aftermarket support as other brands.

Ratios

There were many ratios offered over the lifetime of the AMC 20. A letter code stamped on a small pad at the right side of the center housing or carrier flange indicates installed gears. AMC changed or reused letter codes during the axle's long life. While the codes can be helpful, the axle ratio could have been changed after the vehicle was produced.
Letter Code Open DifferentialLetter Code "Twin Grip"Ratio:1Pinion:Ring Gear Teeth
W-2.5616:41
AADD2.7315:41
CO2.8715:43
XY3.0714:43
BP3.1513:41
BBCC3.3113:43
AN3.5411:39
DO3.9111:43
LM4.1010:41

Dealer installed gears were available There are other gear ratios available in the aftermarket.