Tampella 100 PSTK


The Tampella 100 PSTK is a Finnish towed 100 mm anti-tank gun, designed in the 1980s by Tampella. It was designed for commonality with the D-10T tank gun, in use by the Finnish Defence Forces in the T-54 and T-55 tanks, as well as the 100 56 TK coastal artillery piece. However, due to multitude of reasons it never went into serial production.

Development

In 1986 chief of the Infantry Office of the Finnish Defence Command, Lt. Col. Paavo Kuronen, brought out the question of a range gap in anti-tank weaponry, between contemporary man-portable anti-tank weaponry and anti-tank missiles, ie. 400 and 1000 metres, as well as the multitude of armed vehicles and their rising performance against infantry on the contemporary battlefield. In addition, the FDF Defence Command was worrying of the lack of suitable anti-tank weaponry at the aforementioned ranges to match the increasingly more common explosive reactive armour and layered composite armour. At the time, Finland was also in the process of scrapping its stock of obsolete 75 PstK 40 anti-tank guns. The existing 95 S 58-61 recoilless rifle was theoretically suitable, but its backblast was a remarkable downside, and the old ammunition types didn't offer much to defeat the reactive and composite armour. To this dilemma, the Infantry Office proposed a new anti-tank gun firing modern armour-piercing fin-stabilized discarding sabot (APFSDS) ammunition, a system which could be manufactured entirely in Finland.
The FDF Defence Command Infantry Office created a draft of specifications and presented them to Tampella in spring 1986. The new anti-tank gun were to use the barrel and breech block of the Soviet D-10T, with a new carriage, cradle and traverse unit. Thanks to this, it could use the new Mecar APFSDS which was introduced to the T-55 in the FDF T-55M project. It were to have an auxiliary power unit for assisted movement, a shield to protect from small arms fire and both day and image intensifier based night sights. Its combat weight were to be under 3 tonnes, traverse 60° and elevation −10° to +20°, according to the initial specifications.
After initial calculations by Tampella, FDF Defence Command ordered Tampella to design the gun in May 1987. Tampella ordered the design of the carriage from Sisu Defence, while Tampella concentrated on the design of the gun itself. After the design was ready in November 1987, a prototype gun was ordered by FDF in February 1988, and the final specifications were given. The prototype was delivered in August 1989 after some issues, and field trials were held from January to June 1990 in the Lapland Jaeger Battalion at Sodankylä and to the end of 1990 in the Armoured Brigade at Hämeenlinna.
The trials proved many serious issues: the APU was underpowered for the gun, steering the carriage was difficult and the towing bar of the carriage proved to be too weak, as it fractured repeatedly in use, and the muzzle brake broke due to the pieces of the sabot hitting it. The bore axis was also considered to be too low. The trials were also hindered by lack of spares for the single prototype gun and trivial technical issues such as oil leaks. However, the performance of the gun was considered excellent and the gun was stable in firing position.
The serial production of the gun was intended to be started in 1991, but unsurprisingly, due to the technical issues and a new assessment on the viability of towed anti-tank guns, in July 1991 the FDF Chief of Training Lt. Gen. Matti Kopra officially terminated the project.
The prototype gun was stored in Armoured Brigade, and has been displayed sporadically to the public.
Parts of the recoil mechanism were used in the Patria AMOS and NEMO mortar systems, as Tampella Defence was first merged to FDF Vammaskoski factory after its bankruptcy and subsequently to Patria.

Technical details

  • Mass under
  • Length

  • Height
  • Width
  • Ground clearance
  • Driving speed
  • Towing speed
  • Crew 1+7
  • Rate of fire 6 rpm
  • Shield to protect from small arms fire
  • NIFE RS-420 telescopic day sight
  • Image intensifier night sight

Gun

  • Barrel from D-10T:
  • *Calibre
  • *Barrel assembly length L/56
  • *Barrel length L/54
  • *Rifled bore length
  • *Bore axis height
  • *Breech semi-automatic horizontal sliding block
  • Elevation −10° to +20°
  • Traverse ±30° from centreline
  • Hydro-pneumatic recoil system

Ammunition

  • JVA 3908
  • *Round weight
  • *Muzzle velocity
  • *Effective firing range
  • JVA 3900
  • *Round weight
  • *Muzzle velocity
  • UOF-412 HE
  • *Round weight
  • *Muzzle velocity

Carriage

  • APU engine Rotax 635
  • *Two-stroke petrol engine
  • *Power output at 5,300 rpm
  • *Torque at 4,700 rpm
  • Traction wheels 14.5x20
  • *Double Rexroth hydraulic pumps for power transmission
  • *Valmet Black Bear 1600/800 wheel hub motors
  • *Drum brakes
  • Trail wheel 6.5x16
  • Hydraulic suspension

Operators

Former operators

  • – 1 prototype in trials in 1990, withdrawn at the end of the year.