Scouring (textiles)
Scouring is a preparatory treatment of certain textile materials. Scouring removes soluble and insoluble impurities found in textiles as natural, added and adventitious impurities: for example, oils, waxes, fats, vegetable matter, as well as dirt. Removing these contaminants through scouring prepares the textiles for subsequent processes such as bleaching and dyeing. Though a general term, "scouring" is most often used for wool. In cotton, it is synonymously called "boiling out", and in silk, and "boiling off".
Purpose of scouring
Scouring is an essential pre-treatment for the subsequent finishing stages that include bleaching, dyeing, and printing. Raw and unfinished textiles contain a significant amount of impurities, both natural and foreign. It is necessary to eliminate these impurities to make the products ready for later steps in textile manufacturing. For instance, fatty substances and waxy matters are the major barriers in the hydrophilicity of the natural fibers. Absorbency helps the penetration of chemicals in the stages such as dyeing and printing or finishing of the textiles. These fats and waxy substances are converted into soluble salts with the help of alkali. This treatment is called Saponification.Impurities
Foreign matter in addition to fiber is known as "impurities." Textile fibers contain many types of impurities. e.g.:- Natural impurities: Impurities gathered from the natural environment by the fibres. Natural impurities also include non-fibrous parts that are incorporated into the fiber during its growth. Notably, these are not present in synthetic fibres, which are manufactured artificially.
- Added: Oils and waxes during spinning, crocheting or knitting or weaving.
- Accidental: dirt or mishandling, foreign contaminants.
| Fiber type | Impurities in %age | Source |
| Wool | 40-50 | |
| Cotton | 10 | |
| Silk | 22-30 |
Etymology, and history
Etymology
The term "scouring" refers to the "act of cleaning with a rubbing action".History
was once an everyday household activity. In Europe, women were often involved in textile manufacturing. They used to spin, weave, process, and finish the products they needed at home. In the pre-industrial era, scouring was a part of the fulling process of cloth making, in which the cloths were cleaned, and then milled. Fulling used to be done by pounding the woolen cloth with a club, or by the fuller's feet or hands. This process was associated with waulking songs, which were sung by women in the Scottish Gaelic tradition to set the pace.Earliest scouring agents
Scouring agents are the cleaning agents that remove the impurities from the textiles during the scouring process. While these are now industrially-produced, scouring agents were once produced locally; lant or stale urine and lixivium, a solution of alkaline salts extracted from wood ashes, were among the earliest scouring agents. Lant, which contains ammonium carbonate, was used to scour the wool.Wool scouring
The removal of lanolin, vegetable materials and other wool contaminants before use is an example of wool scouring. Wool scouring is the next process after the woollen fleece of a sheep is cut off. Raw wool is also known as"Grease" or "yolk
| Type of impurity | In Merino | In crossbreed |
| Dirt or soil | 19% | 8% |
| Grease | 16% | 11% |
| Suint | 6% | 8% |
Process
Three steps comprise the complete cleaning process for wool: steeping, scouring, and rinsing.Steeping
Potash and wool fat are two beneficial substances among the contaminants in wool, necessitating the development of specific cleaning techniques capable of recovering these compounds. Steeping is an alternative scouring process, In steeping system, scouring entails in parts. Wool steeping is carried out in stages such as immersing it in lukewarm water for many hours. When the wool includes only a little amount of yolk, the steeping method for recovering the yolk can be skipped.Scouring treatment
Scouring is the process of cleaning wool that makes it free from grease, suint, dead skin and dirt and vegetable matter present as impurities in the wool. It may consist of a simple boiling of wool in water or an industrial process of treating wool with alkalis and detergents Bath temperature is maintained to melt wool grease.The next treatment is carbonization, a treatment with strong acids that convert vegetable matter into carbon.
Rinsing
is the process of thoroughly washing the cleaned wool.Alternative method
The alternative method is solvent scouring.Solvent method
Solvent scouring of wool replaces soap, detergent, and alkalies with a solvent liquid such as carbon tetrachloride, ether, petroleum naphtha, Chloroform, benzene, or carbon disulfide, etc. These liquids are capable of dissolving impurities but highly volatile and flammable. Hence, they need extra care in handling.Cotton scouring
In cotton, non-cellulosic substances such as waxes, lipids, pectic substances, organic acids contribute to around ten percent of the weight. Cotton, in particular, has fewer impurities than wool. Cotton scouring refers to removing impurities such as natural wax, pectins, and non-fibrous matter with a wetting agent and caustic soda. In comparison, alkaline boiling has no effect on cellulose.Impurities in cotton
Cotton Pectins, waxes, proteins, mineral compounds, and ash, etc.| Type of impurity | %age |
| Pectins | 0.4-1.2 |
| Wax | 0.4-1.2 |
| Others | 1.7 |
Methods
Continuous scouring
Discontinuous scouring
In discontinuous method certain machines are used such as dyeing vessels, winches, jiggers and Kier.Kier boiling
is a large cylindrical vessel, upright, with egg shaped ends made of boilerplate that has a capacity of treating one to three tonnes of material at a time.Kier boiling and