Spring (hydrology)
A spring is a natural exit point at which groundwater emerges from an aquifer and flows across the ground surface as surface water. It is a component of the hydrosphere, as well as a part of the water cycle. Springs have long been important for humans as a source of fresh water, especially in arid regions which have relatively little annual rainfall.
Springs are driven out onto the surface by various natural forces, such as gravity and hydrostatic pressure. A spring produced by the emergence of geothermally heated groundwater is known as a hot spring. The yield of spring water varies widely from a volumetric flow rate of nearly zero to more than for the biggest springs.
Formation
Springs are formed when groundwater flows onto the surface. This typically happens when the water table reaches above the surface level, or if the terrain depresses sharply. Springs may also be formed as a result of karst topography, aquifers or volcanic activity. Springs have also been observed on the ocean floor, spewing warmer, low-salinity water directly into the ocean.Springs formed as a result of karst topography create karst springs, in which ground water travels through a network of cracks and fissures—openings ranging from intergranular spaces to large caves, later emerging in a spring.
The forcing of the spring to the surface can be the result of a confined aquifer in which the recharge area of the spring water table rests at a higher elevation than that of the outlet. Spring water forced to the surface by elevated sources are artesian wells. This is possible even if the outlet is in the form of a cave. In this case the cave is used like a hose by the higher elevated recharge area of groundwater to exit through the lower elevation opening.
Non-artesian springs may simply flow from a higher elevation through the earth to a lower elevation and exit in the form of a spring, using the ground like a drainage pipe. Still other springs are the result of pressure from an underground source in the earth, in the form of volcanic or magma activity. The result can be water at elevated temperature and pressure, i.e. hot springs and geysers.
Image:MiddleSpring.JPG|thumb|Sunrise at Middle Spring, Fish Springs National Wildlife Refuge, Utah
The action of the groundwater continually dissolves permeable bedrock such as limestone and dolomite, creating vast cave systems.
Types
- Depression springs occur along a depression, such as the bottom of alluvial valleys, basins, or valleys made of highly permeable materials.
- Contact springs, which occur along the side of a hill or mountain, are created when the groundwater is underlaid by an impermeable layer of rock or soil known as an aquiclude or aquifuge
- Fracture, or joint occur when groundwater running along an impermeable layer of rock meets a crack or joint in the rock.
- Tubular springs occur when groundwater flows from circular fissures such as those found in caverns or lava tubular springs found in lava tube caves.
- Artesian springs typically occur at the lowest point in a given area. An artesian spring is created when the pressure for the groundwater becomes greater than the pressure from the atmosphere. In this case the water is pushed straight up out of the ground.
- Wonky holes are freshwater submarine exit points for coral and sediment-covered, sediment-filled old river channels.
- Karst springs occur as outflows of groundwater that are part of a karst hydrological system.
- Thermal springs are heated by geothermal activity; they have a water temperature significantly higher than the mean air temperature of the surrounding area. Geysers are a type of hot spring where steam is created underground by trapped superheated groundwater resulting in recurring eruptions of hot water and steam.
- Carbonated springs, such as Soda Springs Geyser, are springs that emit naturally occurring carbonated water, due to dissolved carbon dioxide in the water content. They are sometimes called boiling springs or bubbling springs.
- "Gushette springs pour from cliff faces"
- Helocrene springs are diffuse that sustain marshlands with groundwater.
Flow
Classification
Springs fall into three general classifications: perennial ; intermittent ; and periodic.Springs are often classified by the volume of the water they discharge. The largest springs are called "first-magnitude", defined as springs that discharge water at a rate of at least 2800 liters or of water per second. Some locations contain many first-magnitude springs, such as Florida where there are at least 27 known to be that size; the Missouri and Arkansas Ozarks, which contain 10 known of first-magnitude; and 11 more in the Thousand Springs area along the Snake River in Idaho. The scale for spring flow is as follows:
| Magnitude | Flow | Flow |
| 1st magnitude | > 100 ft3/s | 2800 L/s |
| 2nd magnitude | 10 to 100 ft3/s | 280 to 2800 L/s |
| 3rd magnitude | 1 to 10 ft3/s | 28 to 280 L/s |
| 4th magnitude | 100 US gal/min to 1 ft3/s | 6.3 to 28 L/s |
| 5th magnitude | 10 to 100 gal/min | 0.63 to 6.3 L/s |
| 6th magnitude | 1 to 10 gal/min | 63 to 630 mL/s |
| 7th magnitude | 1 pint to 1 gal/min | 8 to 63 mL/s |
| 8th magnitude | Less than 1 pint/min | 8 mL/s |
| 0 magnitude | no flow |
Water content
s become dissolved in the water as it moves through the underground rocks. This mineral content is measured as total dissolved solids. This may give the water flavor and even carbon dioxide bubbles, depending on the nature of the geology through which it passes. This is why spring water is often bottled and sold as mineral water, although the term is often the subject of deceptive advertising. Mineral water contains no less than 250 parts per million of tds. Springs that contain significant amounts of minerals are sometimes called 'mineral springs'. Springs that contain large amounts of dissolved sodium salts, mostly sodium carbonate, are called 'soda springs'. Many resorts have developed around mineral springs and are known as spa towns. Mineral springs are alleged to have healing properties. Soaking in them is said to result in the absorption of the minerals from the water. Some springs contain arsenic levels that exceed the 10 ppb World Health Organization standard for drinking water. Where such springs feed rivers they can also raise the arsenic levels in the rivers above WHO limits.Water from springs is usually clear. However, some springs may be colored by the minerals that are dissolved in the water. For instance, water heavy with iron or tannins will have an orange color.
In parts of the United States a stream carrying the outflow of a spring to a nearby primary stream may be called a spring branch, spring creek, or run. Groundwater tends to maintain a relatively long-term average temperature of its aquifer; so flow from a spring may be cooler than other sources on a summer day, but remain unfrozen in the winter. The cool water of a spring and its branch may harbor species such as certain trout that are otherwise ill-suited to a warmer local climate.
Types of mineral springs
- Sulfur springs contain a high level of dissolved sulfur or hydrogen sulfide in the water. Historically they have been used to alleviate the symptoms of arthritis and other inflammatory diseases.
- Borax springs
- Gypsum springs
- Saline springs
- Iron springs
- Radium springs have a detectable level of radiation produced by the natural radioactive decay process
Uses