Scania K series


The Scania K series is a series of chassis in Scania's city bus and coach range with longitudinally, straight-up mounted engine at the rear, replacing the K- and L-type chassis of the 4 series. The K series was first presented on Busworld 2005 in Kortrijk, Belgium, and models were available from 2006.

Type designation breakdown

;Plant at which the vehicle was assembled
  • C: former Kapena plant, Slupsk, Poland
  • L: Lahden Autokori plant, Lahti, Finland – Interlink and OmniExpress
  • T: Higer plant, China – A30 and A808 Touring coaches
;Engine location
  • K: chassis with centrally mounted longitudinal engine behind rearmost axle
;Power code
Approximation of the power rating in hp to the nearest ten. The power code has spaces on both sides.
;Type of transport
  • E: coach, long distance, high comfort
  • I: intercity, short to long distance, normal comfort
  • U: urban, short distance, normal comfort
;Chassis adaption
;Wheel configuration
  • 4x2: two-axle bus
  • 6x2: tri-axle bus
  • 6x2/2: tri-axle articulated bus
  • 6x2*4: tri-axle bus with steered tag axle
  • 8x2: quad-axle bus
  • 8x2/2: quad-axle articulated bus
;Chassis height
  • L: low front, normal rear
  • M: low front and middle, normal rear
  • N: normal front and rear
;Suspension
K230UB4x2LB would be a two-axle "low entry" city bus, while K480EB6x2*4NI would be a tri-axle long-distance coach with a steerable tag axle.
''Note: One might think that double-decker coaches are designated as K 440 ED6x2*4NI. But they still use K EB for some reason.''

Engines

When introduced, the K series was available with Euro IV-compliant 8.9-litre 5-cylinder engines with output of 230 hp, 270 hp and 310 hp as well as the 11.7-litre 6-cylinder engines with output of 340 hp, 380 hp, 420 hp or 470 hp, the latter being a DT12 turbo-compound engine. For the 5- and 6-cylinder engines Scania is using exhaust gas recirculation and selective catalytic reduction systems to fulfill the legal Euro emission standards.
In 2008 Scania released upgraded Euro V engines in order to meet these regulations. The 5-cylinder DC9 engines featured a larger bore and displace 9.3-litres instead of 8.9-litres. The new DC13 engines feature both a larger bore and a longer stroke and therefore displace 12.7-litres instead of 11.7-litres. Some engines also received slight performance improvements, for example the DC9 engine that outputs 310 hp was upgraded to 320 hp.
With the introduction of Euro VI engines in 2013, the DC09 outputs 250 hp, 280 hp, 320 hp and 360 hp, while the DC13 outputs 410 hp, 450 hp and 490 hp. Euro III, IV and V engines are still available for export markets.
For alternative fuels, the 9.3-litre was available as the OC9 CNG engine with power outputs of 270 hp and 305 hp, which from the introduction of Euro VI was replaced by the OC09 with power outputs of 280 hp 320 hp and 340 hp. The 8.9-litre is available as the ethanol fueled DC9 E02 with a power output of 270 hp.

Scania K EB

The K280EB, K310EB, K320EB, K340EB, K360EB, K380EB, K400EB, K410EB, K420EB, K440EB, K450EB, K470EB, K480EB and K490EB chassis have independent front suspension and are used for top end coaches..

Scania K IA

The K310IA is an articulated intercity bus chassis available in Latin America as 6x2/2 and 8x2/2.
One K340IA 6x2/2 and 107 K320IA 6x2/2 are operated for TransJakarta, with the K340IA unit and 51 K320IA units self-operated by TransJakarta management and 56 K320IA units owned and operated by PT. Mayasari Bakti. All units uses OC09 CNG engines that fulfill Euro VI emission standard. The K340IA unit has been retired

Scania K IB

The K250IB, K270IB, K280IB, K310IB, K320IB, K340IB, K360IB, K380IB, K400IB, K410IB, and K420IB are the intercity bus variants but are also used for coaches. It is available as 4x2, 6x2, 6x2*4 and 8x2. It is in service in Taiwan, Singapore, Malaysia, Indonesia, Philippines and Australia.
Singapore-Johore Express, a Singapore-based private bus operator running a single bus route, has several K114IB units serving the Queen Street - Larkin Terminal cross-border route.
In Malaysia, public transport operator Causeway Link owns several K250IB and K310IB units, fitted with SKSBus Ci09 or RTG Intech bodywork. Some units were registered with Singapore's Land Transport Authority for use on cross-border routes. In late 2024 a small number of units were sent to RapidKL due to a fleet shortage of RapidKL.
Scania formally introduced the K-series chassis to the Philippine market in the mid-2010s through its authorized distributor, BJ Mercantile, Inc. The initial unit made available was the Euro 3 variant of the K360IB, which was first acquired by P&O Transportation and equipped with a Marcopolo Audace body. In the latter part of 2022, the Euro 5 version of the K360IB was launched, with Bicol Isarog Transport System serving as the initial customer. These units were fitted with bodies manufactured by Del Monte Motors. Concurrently, Scania unveiled the K400IB paired with its flagship Scania Touring body. This model was procured by Cagsawa Travel and Tours and by Elavil Tours Philippines, Inc., the latter of which further augmented its fleet in K360 units utilizing Del Monte-built bodies.
The subsequent year marked significant adoption in Northern Luzon, led by GV Florida Transport, which procured the K360IB in 2024. This acquisition positioned GV Florida Transport as the largest operator of Scania buses in the Philippines. The company’s initial fleet utilized bodies supplied by Del Monte Motors; however, later batches of K360 chassis were integrated with bus bodies produced by Pura Bus, the operator’s in-house bus body manufacturing division. Genesis Transport, operating under the Joybus brand, also incorporated K360IB units into its fleet, configured with Marcopolo Paradiso bodies.
In 2025, Scania introduced the K410CB as the official successor to the K360IB. GV Florida Transport once again emerged as a launch customer, further solidifying its role as a key partner in the continued expansion of Scania’s presence in the Philippine bus market.

Scania K UA

The K310UA, K320UA, and K360UA are the articulated city bus variant which can be ordered with the two stronger 9-litre diesel engine variants or the strongest 9-litre CNG engine variant.
Sydney Buses currently has one K310UA in service on Metrobus Route 10, plying between Maroubra Junction and Leichhardt via CBD.
In Canberra, ACTION operates a fleet of K360UA buses with both Custom Coaches and Volgren bodywork.
In Adelaide, Torrens Transit currently have 96 K320UA units, plus 25 K360UAs. In addition, Torrens Transit has one K310UA unit which was used as an initial trial bus on the O-Bahn. SouthLink currently has 11 K360UA units. Busways has 4 K360UAs.

Scania K UB

The K230UB, K250UB, K270UB, K280UB, K305UB, K310UB, K320UB, and K360UB are the rigid city bus variant which can be ordered with all 9-litre engines. A pair of K380UB 6x2*4 with the 11.7-litre engine has also been made for a customer in Norway.

Australia

Numerous bus operators in Australia operate the Scania K-series chassis.
In Melbourne, CDC Melbourne, Transdev Melbourne and Ventura Bus Lines all operate fleets of K230UBs. In Geelong, CDC Geelong operates a number of K230UBs and McHarry's Buslines also operate a number of K270UBs, K270IBs, K280UBs, K280IBs, K320IBs and one K310IB.
In New South Wales, Busways and ComfortDelGro Australia's CDC NSW and Hunter Valley Buses subsidiaries have significant numbers of K230UB, K280UB and K310UB in their fleet. Transdev NSW also operates a fleet of K230UB, Transit Systems NSW operates the K280UB, K94UB and the K310UB while State Transit operate K280UB & K310UB.
In Canberra, ACTION operates over 150 K320UBs, including 26 Euro V K320UB 6x2*4 buses.
In Adelaide, Torrens Transit currently have 114 K230UB units, 101 K280UB units, 190 K320UB units, including as 18 K320UB Hybrid diesel/electric buses. SouthLink currently has 13 K230UB units plus 3 K320 hybrid units, and Busways has 23 K230UBs, 20 K280UBs and 8 K320UB including 3 hybrids.
In Brisbane, Transport for Brisbane operate fleets of K310UB6x2. Bus Queensland and Mt Gravatt Bus Service have significant numbers of K230UB, K270IB, K280UB, K310UB and K320UB in their fleet., Hornibrook Bus Lines subsidiaries have significant numbers of the K230UB, K280UB and K320UB.

Hong Kong

In 2008, Kowloon Motor Bus purchased 30 Scania K230UBs with that is compliant Euro IV Scania DC9 engine and Caetano City Gold body, 20 of which were 10.6m and the remainder were 12m in lengths. All were delivered in 2009.
The twenty 10.6m versions of K230UBs have been registered between April and June 2009 and known as the ASB class. After undergoing tests, the first few units were finally introduced on route 2C plying between Yau Yat Tsuen and Tsim Sha Tsui on Sunday, 24 May 2009. Some other buses have also been introduced on suburban routes, such as route 7M & 24.
The ten 12m versions of K230UBs have also been registered between June and August 2009 and known as the ASC class.
A further 20 K230UBs of 12m length were ordered afterwards, with one being a Euro V EEV demonstrator of the ASCU class.
HZMB bus operator has ordered 100 K250UBs with Higer body and delivered in 2018.

Indonesia

In 2016, the Jakarta Provincial Government placed orders for 150 Scania K250UB Euro III to replace aging Kopaja and MetroMini fleet. In advantage of the older buses, the Scania K250UB is wheelchair accessible and fitted with air conditioner. It is also expected to reduce air pollution since it fulfills Euro III emission standard. The buses are operated by TransJakarta as MetroTrans, and operated outside the BRT system. Operation started by 2017.
In 2020, Suroboyo Bus purchased eight Scania K250UB Euro III buses bodied with Cityline 3 by Laksana. These units are equipped with bike racks in the front of the bus.