Passive house


Passive house is a voluntary building performance standard for very high energy efficiency and thermal comfort that substantially reduces a building’s carbon footprint. Buildings certified to the standard are ultra-low energy and typically require very little energy for space heating or cooling. The approach is used for housing and for non-residential buildings such as offices, schools, kindergartens and healthcare facilities. Energy efficiency is integral to architectural design rather than an add-on. Although most common in new construction, the principles are also applied in deep renovations.
As of January 2025, projects certified by the Passive House Institute comprise over 47,400 units with about 4.32 million m² of treated floor area worldwide; the public PHI database lists nearly 6,000 projects. In North America, the Passive House Institute US reported 500+ total certified projects and ~1.6 million ft² certified in 2024 alone, with 4.4 million ft² design-certified that year. While early adoption concentrated in German-speaking countries and Scandinavia, certified projects are now documented across diverse climate zones, including hot-humid and tropical regions.

History

The term passive house was used in the 1970s for buildings emphasizing passive solar strategies; since the 1990s it denotes meeting the quantified PHI certification criteria. The standard originated from a 1988 discussion between Bo Adamson and Wolfgang Feist, followed by research supported by the state of Hesse.
North American “superinsulation” pioneers of the 1970s provided important technical precursors, including heat-recovery ventilation and airtightness testing.

First examples

Four terraced houses in Darmstadt-Kranichstein are widely cited as the first built to what became the Passive House standard.

Further implementation

The Passivhaus-Institut was founded in 1996 in Darmstadt to develop, promote and certify to the standard. By 2010 an estimated 25,000+ Passive House buildings existed worldwide.
The concept has since been demonstrated at scale. Gaobeidian, China, hosts what is reported as the world’s largest Passive House development, with several hundred thousand m² of certified area built in phases since 2019. The world’s tallest certified Passive House building is the 88 m Bolueta tower in Bilbao, Spain.
In the United States, Katrin Klingenberg’s 2003 “Smith House” catalyzed a movement that led to the creation of PHIUS. PHIUS has since certified hundreds of projects; New York City’s Park Avenue Green was recognized as North America’s largest Passive House affordable housing project at the time.
In the UK health sector, the Passivhaus-certified Foleshill Health Centre demonstrated substantial energy savings in operation and a replicable delivery model for NHS facilities.

Standards

While techniques such as superinsulation predate the standard, Passive House specifies quantitative performance criteria and quality assurance. Key requirements include :
  • Annual space heating demand ≤ or peak heat load ≤, calculated with the PHPP using local climate data.
  • Airtightness: n50 ≤ 0.6 h⁻¹ at ±50 Pa.
  • Efficient mechanical ventilation with heat recovery.
  • Whole-building primary energy/renewable energy limits as defined by PHI.

    Standards in the US: PHI vs. PHIUS+

Two related but distinct standards operate in North America:
  • PHI : the original international Passive House standard and certification system using PHPP and PHI quality assurance.
  • PHIUS+ : climate-specific performance targets with on-site QA/QC by accredited raters and verifiers; criteria are optimized for carbon and cost within each North American climate zone.
The two programs use different energy models and protocols and certify independently.

Construction costs

Upfront costs vary by market, building type and experience of the delivery team. Reported premiums have ranged from ~5–10% in Germany, the UK and the US, partially offset by downsized or eliminated conventional heating/cooling systems and lower operating costs. Delivery at parity with standard code buildings has been demonstrated in some German multifamily projects. High-latitude locations can face higher envelopes and glazing costs to meet targets.

Design and construction

Core practices include:
  • Passive solar design and urban/landscape integration – compact massing, appropriate solar gains, shading, and mitigation of overheating; strategies are adapted to climate, especially in hot-humid regions.
  • Superinsulation and thermal-bridge-free detailing.
  • High-performance windows.
  • Airtightness to n50 ≤0.6 h⁻¹, verified by blower-door testing; intermediate tests during construction are recommended.
  • Balanced mechanical ventilation with heat recovery for IAQ and energy recovery; earth-tubes may be used with careful moisture control where appropriate.
  • Low-load space conditioning – many climates allow heating via tempered ventilation air with small duct heaters or heat-pump coils; peak loads are limited by envelope performance.

    Performance and occupant behaviour

Concerns are sometimes raised that occupants must restrict behaviours, but sensitivity analyses indicate performance is generally robust to typical occupant variation.

International comparisons

  • United States – Space-heating intensity around per heating degree day is typical for PHI Passive House, compared to ~5–15 for code-built homes, representing 75–95% savings. Waldsee BioHaus follows the German standard and reported ~85% lower energy use than comparable LEED homes.
  • United Kingdom – New houses to Passive House standard used ~77% less space-heating energy than homes built under circa-2006 Building Regulations.
  • Ireland – Typical Passive House dwellings consumed ~85% less space-heating energy and cut related CO₂ by ~94% versus 2002 Regulations baselines.