Reel-to-reel audio tape recording
Reel-to-reel audio tape recording, also called open-reel recording, is magnetic tape audio recording in which the recording tape is spooled between reels. To prepare for use, the supply reel containing the tape is placed on a spindle or hub. The end of the tape is manually pulled from the reel, threaded through mechanical guides and over a tape head assembly, and attached by friction to the hub of the second, initially empty takeup reel. Reel-to-reel systems use tape that is wide, which normally moves at.
Reel-to-reel preceded the development of the compact cassette with its tape wide moving at. By writing the same audio signal across more tape, reel-to-reel systems give much greater fidelity at the cost of much larger tapes. In spite of the relative inconvenience and generally more expensive media, reel-to-reel systems developed in the early 1940s remained popular in audiophile settings into the 1980s and have re-established a specialist niche in the 21st century.
Studer, Stellavox, Tascam, and Denon produced reel-to-reel tape recorders into the 1990s, but, only Mechlabor continues to manufacture analog reel-to-reel recorders., there were two companies manufacturing magnetic recording tape: ATR Services of York, Pennsylvania, and Recording the Masters in Avranches, France.
Reel-to-reel tape was used in early tape drives for data storage on mainframe computers and in video tape recorders. Magnetic tape was also used to record data signals from analytical instruments, beginning with the hydrogen bomb testing of the early 1950s.
History
The reel-to-reel format was used in the first magnetic recording systems, wire recording and then in the earliest tape recorders, including the pioneering German-British Blattnerphone machines which used steel tape, and the German Magnetophon machines of the 1930s. Originally, this format had no name, since all forms of magnetic tape recorders used it. The name arose only with the need to distinguish it from the several kinds of tape cartridges or cassettes such as the Fidelipac endless loop cartridge developed for radio station commercials and spot announcements in 1954, the RCA tape cartridge, developed in 1958 for home use, and the Compact Cassette developed by Philips in 1963, originally for dictation.The earliest machines produced distortion during the recording process which German engineers significantly reduced during the Nazi Germany era by applying a DC bias signal to the tape. In 1939, one machine was found to make consistently better recordings than other ostensibly identical models, and when it was taken apart, a minor flaw was noticed. Instead of DC, it was introducing an AC bias signal to the tape, and this was quickly adapted to new models using a high-frequency AC bias that has remained a part of audio tape recording to this day. The quality was so greatly improved that recordings surpassed the quality of most radio transmitters, and such recordings were used by Adolf Hitler to make broadcasts that appeared to be live while he was safely away in another city.
American audio engineer Jack Mullin was a member of the U.S. Army Signal Corps during World War II. His unit was assigned to investigate German radio and electronics activities, and in the course of his duties, a British Army counterpart mentioned the Magnetophons being used by the allied radio station in Bad Nauheim near Frankfurt. He acquired two Magnetophon recorders and 50 reels of I.G. Farben recording tape and shipped them home. Over the next two years, he worked to develop the machines for commercial use, hoping to interest the Hollywood film studios in using magnetic tape for movie soundtrack recording.
File:Unitra ZK-147.jpg|thumb|right|Unitra ZK-147, a vintage Polish-made reel-to-reel tape recorder
Mullin gave a demonstration of his recorders at MGM Studios in Hollywood in 1947, which led to a meeting with Bing Crosby, who immediately saw the potential of Mullin's recorders to pre-record his radio shows. Crosby invested $50,000 in a local electronics company, Ampex, to enable Mullin to develop a commercial production model of the tape recorder. Using Mullin's tape recorders and with Mullin as his chief engineer, Crosby became the first American performer to master commercial recordings on tape and the first to regularly pre-record his radio programs on the medium.
Ampex and Mullin subsequently developed commercial stereo and multitrack audio recorders, based on the system originally invented by Ross Snyder of Ampex Corporation for their high-speed scientific instrument data recorders. Les Paul had been given one of the first Ampex Model 200A tape decks by Crosby in 1948, and ten years later ordered one of the first Ampex eight-track Sel Sync machines for multitracking. Ampex engineers, who included Ray Dolby on their staff at the time, went on to develop the first practical videotape recorders in the early 1950s to pre-record Crosby's TV shows.
Inexpensive reel-to-reel tape recorders were widely used for voice recording in the home and in schools, along with dedicated models expressly made for business dictation. When the Philips compact cassette was introduced in 1963 it gradually took over and cassettes eventually displaced reel-to-reel recorders for consumer use. However, the narrow tracks and slow recording speeds used in cassettes compromised fidelity and so Ampex produced pre-recorded reel-to-reel tapes for consumers of popular and classical music from the mid-1950s to the mid-'70s, as did Columbia House from 1960 to 1984.
Following the example set by Bing Crosby, large reel-to-reel tape recorders rapidly became the main recording format used by audiophiles and professional recording studios until the late 1980s when digital audio recording techniques began to allow the use of other types of media.
Even today, some artists of all genres prefer analog tape, claiming it is more musical or natural sounding than digital processes, despite its inaccuracies. Due to harmonic distortion, bass can thicken up, creating a fuller-sounding mix. High-end frequencies can be slightly compressed. Tape saturation is a unique form of distortion that many artists find satisfying. Though with modern technology, these forms of distortion can be simulated digitally, it is not uncommon for some artists to record directly onto digital equipment and then re-record the tracks to analog reel tape or vice versa.
The great practical advantage of tape for studios was twofold: it allowed a performance to be recorded without the 30-minute time limitation of a phonograph disc, and it permitted a recorded performance to be edited or erased and re-recorded again and again on the same piece of media without any waste. For the first time, audio could be manipulated as a physical entity, and the recording process was greatly economized by eliminating the requirement for a highly trained disc-cutting engineer to be present at every recording session. Once a tape machine was installed and calibrated, there was no need for any attendant engineering, other than to spool or replace the tape being used on it. Daily maintenance consisted of cleaning and occasionally demagnetizing the heads and guides.
Tape editing is performed simply by cutting the tape at the required point and rejoining it to another section of tape using adhesive tape, or sometimes glue; it is called a splice. The adhesive tape used in splicing has to be very thin to avoid impeding the tape's motion, and the adhesive is carefully formulated to avoid leaving a sticky residue on the tape or deck. Butt splices are used for fast edits from one sound to another, though preferably, the splice is made at a much lower angle across the tape so that any transitional noise introduced by the cut is spread across a few milliseconds of the recording. The low-angle splice also helps to glide the tape more smoothly through the machine and push any loose dirt or debris to the side of the tape path, instead of accumulating in the splice joint. A side-effect of cutting the tape at an angle is that on stereo tapes the edit occurs on one channel a split-second before the other. Long, angled splices can also be used to create a perceptible dissolve from one sound to the next; periodic segments can induce rhythmic or pulsing effects. The use of reels to supply and collect the tape makes it easy for editors to manually move the tape back and forth across the heads to find the exact point they wish to edit. Tape to be spliced is clamped in a splicing block attached to the deck near the heads to hold the tape accurately while the edit is made. The Editall was a long-in-production splicing block, named for its inventor Joe Tall, a tape editor at CBS.
The performance of tape recording is greatly affected by the width of the tracks and the speed of the tape. The wider and faster the better, but of course this uses more tape. These factors lead directly to improved frequency response, signal-to-noise ratio, and high-frequency distortion figures. Tape can accommodate multiple parallel tracks, allowing not just stereo recordings, but multitrack recordings too. This gives the producer of the final edit much greater flexibility, allowing a performance to be remixed long after the performance was originally recorded. This innovation was a great driving force behind the explosion of popular music in the late 1950s and 1960s.
It was discovered that special effects were possible, such as phasing and flanging, delays and echo by re-directing the signal through one or more additional tape machines, while recording the composite result to another. These innovations appeared on pop recordings shortly after multi-tracking recorders were introduced, although Les Paul had been using tape echo and speed-manipulation effects on his single-track recordings from the 1940s and '50s.
For home use, simpler reel-to-reel recorders were available, and a number of track formats and tape speeds were standardized to permit interoperability and prerecorded music.
Reel-to-reel tape editing also gained cult status when many used this technique on hit singles in the 1980s.
In the former USSR, reel-to-reel tape recorders were widely used at home until the fall of communism in 1991. It was the only source of quality sound used for the distribution of Western music as well as underground local artists.
There has recently been a revival of reel-to-reel, with quite a few companies restoring vintage units and some manufacturing new tape. In 2018, the first new reel-to-reel tape player in over 20 years was released.