Mikoyan-Gurevich MiG-25
The Mikoyan-Gurevich MiG-25 is a supersonic interceptor and reconnaissance aircraft that is among the fastest military aircraft to enter service. Designed by the Soviet Union's Mikoyan-Gurevich bureau, it is an aircraft built primarily using stainless steel. It was to be the last aircraft designed by Mikhail Gurevich, before his retirement.
The first prototype flew in 1964 and the aircraft entered service in 1970. Although it was capable of reaching Mach 3.2+, this would result in the engines accelerating out of control and needing replacement, therefore the operational top speed was limited to Mach 2.83. The MiG-25 features a powerful radar and four air-to-air missiles, and it still has the world record for reached altitude by airbreathing piloted aircraft of.
Production of the MiG-25 series ended in 1984 after completion of 1,186 aircraft. A symbol of the Cold War, the MiG-25 flew with Soviet allies and former Soviet republics, remaining in limited service in several export customers. It is one of the highest-flying military aircraft, one of the fastest serially produced interceptor aircraft, and the second-fastest serially produced aircraft after the SR-71 reconnaissance aircraft, which was built in very small numbers compared to the MiG-25., the MiG-25 remained the fastest manned serially produced aircraft in operational use and the fastest plane that was offered for supersonic flights and edge-of-space flights to civilian customers.
Design and development
Background
During the Cold War, Soviet Air Defence Forces, PVO was given the task of strategic air defence of the USSR. This meant not only dealing with accidental border violations but more importantly defending the vast airspace of the USSR against US reconnaissance aircraft and strategic bombers carrying free-fall nuclear bombs. The performance of these types of aircraft was steadily improved. In the late 1950s, the very high altitude overflights of Soviet territory by the Lockheed U-2 revealed the need for a higher altitude interceptor aircraft than available at that time.In addition, the subsonic Boeing B-47 Stratojet and Boeing B-52 Stratofortress strategic bombers were followed by the Mach 2 Convair B-58 Hustler, with the Mach 3 North American B-70 Valkyrie being developed at that time. A major upgrade in the PVO defence system was required in order to meet the higher and faster American strategic bombers. At the start of 1958, a requirement was issued for manned interceptors capable of reaching and heights of up to. Mikoyan and Sukhoi responded.
The Mikoyan-Gurevich OKB had been working on a series of interceptors during the second half of the 1950s: the I-1, I-3U, I-7U, I-75, Ye-150, Ye-150A, Ye-152, Ye-152A, Ye-152P, and Ye-152M. The Ye-150 was noteworthy because it was built specifically to test the Tumansky R-15 engine, two of which would later be used for the MiG-25. This led to Ye-152, alternatively known as Ye-166, which set several world records. The Ye-152M was intended to be the definite heavy interceptor design. But before it was finished, the PVO had selected the Tupolev Tu-128. As the work on the MiG-25 was well under way, the single-engine Ye-152M was abandoned.
Development
Work on the new Soviet interceptor that became the MiG-25 started in mid-1959, a year before Soviet intelligence learned of the American Mach 3 A-12 reconnaissance aircraft. It is not clear if the design was influenced by the American XF-108 Rapier and the A-5 Vigilante.The design bureau studied several possible layouts for the new aircraft. One had the engines located side by side, as on the MiG-19. The second had a stepped arrangement with one engine amidships, with exhaust under the fuselage, and another in the aft fuselage. The third project had an engine arrangement similar to that of the English Electric Lightning, with two engines stacked vertically. Options two and three were both rejected because the size of the engines meant that either of them would result in a very tall aircraft, which would complicate maintenance.
The idea of placing the engines in underwing nacelles was also rejected because of the dangers of any thrust asymmetry during flight. Having decided on engine configuration, there was thought of giving the machine variable-sweep wings and a second crew member, a navigator. Variable geometry would improve manoeuvrability at subsonic speed, but at the cost of decreased fuel tank capacity. Because the reconnaissance aircraft would operate at high speed and high altitude, the idea was soon dropped. Another interesting but impractical idea was to improve the field performance using two RD36-35 lift-jets. Vertical takeoff and landing would allow for use of damaged runways during wartime and was studied on both sides of the Iron Curtain. The perennial problem with engines dedicated to vertical lift is they become mere dead weight in horizontal flight and also occupy space in the airframe needed for fuel. The MiG interceptor would need all the fuel it could get, so the idea was abandoned.
The first prototype was a reconnaissance variant, designated Ye-155-R1, that made its first flight on 6 March 1964. It had some characteristics that were unique to that prototype, and some of these were visually very evident: the wings had fixed wingtip tanks with a capacity, to which small winglets were attached for stability purposes, but when it was found that fuel sloshing around in the tanks caused vibrations, they were eliminated. The aircraft also had attachments for movable foreplanes, canards, to help with pitch control at high speed.
The first flight of the interceptor prototype, Ye-155-P1, took place on 9 September 1964. Development of the MiG-25, which represented a major step forward in Soviet aerodynamics, engineering and metallurgy, took several more years to complete.
On 9 July 1967, the new aircraft was first shown to the public at the Domodedovo air show, with four prototypes making a flypast.
Aviation records
The Mikoyan-Gurevich design bureau soon realized that the performance of the new aircraft gave it great potential to set new flight records. In addition to their normal duties, the prototypes Ye-155-P1, Ye-155-R1, Ye-155-R3 were made lighter by removing some unneeded equipment and were used for these attempts. Under Federation Aeronautique Internationale classification, the Ye-155 type belonged to class C1, which specifies jet-powered land planes with unlimited maximum take-off weight. Records set included:- The first claim was for world speed records with no payload and payloads of. MiG OKB Chief Test Pilot Aleksandr Vasilyevich Fedotov reached an average speed of over a circuit on 16 March 1965.
- For pure speed, with no payload, test pilot Mikhail M. Komarov averaged over a closed circuit on 5 October 1967. On the same day, Fedotov reached an altitude of with a payload. The MiG eventually became the first aircraft to go higher than.
- Time to height records were recorded on 4 June 1973 when Boris A. Orlov climbed to in 2 min 49.8 s. The same day, Pyotr M. Ostapenko reached in 3 min 12.6 s and in 4 min 3.86 s.
- On 25 July 1973, Fedotov reached with payload and with no load. In the thin air, the engines flamed out, and the aircraft coasted in a ballistic trajectory by inertia alone. At the apex the speed had dropped to.
- On 31 August 1977, Ye-266M again flown by Fedotov, set the recognized absolute altitude record for a jet aircraft under its own power. He reached at Podmoskovnoye, USSR in zoom climb. The aircraft was actually a MiG-25RB re-engined with the powerful R-15BF2-300. It had earlier been part of the program to improve the aircraft's top speed that resulted in the MiG-25M prototype.
Technical description
Because of the thermal stresses incurred in flight above Mach 2, the Mikoyan-Gurevich OKB had difficulties choosing what materials to use for the aircraft. They had to use E-2 heat-resistant Plexiglas for the canopy and high-strength stainless steel for the wings and fuselage. Using titanium rather than steel would have been ideal, but it was expensive and difficult to work with. The problem of cracks in welded titanium structures with thin walls could not be solved, so the heavier nickel steel was used instead. It cost far less than titanium and allowed for welding, along with heat-resistant seals. The MiG-25 was constructed from 80% nickel-steel alloy, 11% aluminium, and 9% titanium. The steel components were formed by a combination of spot welding, automatic machine welding, and hand arc welding methods.Initially, the interceptor version was equipped with the TL-25 Smerch-A radar, a development of the system carried by the earlier Tu-128. While powerful and thus long-ranged and resistant to jamming, the system—due to the age of its design and its intended purpose —lacked look-down/shoot-down capability, which limited its effectiveness against low-flying targets. By the time the MiG-25 entered service in 1969, this was a serious shortcoming, as strategic bombing doctrine was shifting towards low-level penetration of enemy territory. After Belenko's defection to Japan exposed this flaw to the West, a government decree issued on 4 November 1976 urgently called for a more advanced radar. To speed up development, the existing RP-23 Sapfir of the MiG-23 was repurposed, with the use of a larger antenna. The renamed Sapfir-25 gave the new MiG-25PD variant improved jamming resistance and look-down/shoot-down capability.
As an interceptor, typical armament includes four R-40 long-range air-to-air missiles, each fitted with either an infrared seeker or a semi-active radar homing seeker and a maximum range of against a high-flying target on a collision course. A fuel tank could be suspended under the fuselage. The aircraft could carry unguided gravity bombs to fulfill a rudimentary strike role by using a delivery system developed for nuclear weapons. As the bombs would weigh no more and incur no more drag than its regular load of R-40 missiles, its performance was not impaired, leading to some impressive bombing feats; when released at an altitude of and a speed above Mach 2, a bomb would have a range of several tens of kilometres.
The MiG-25 was theoretically capable of a maximum speed exceeding Mach 3 and a ceiling of. Its high speed was problematic: Although sufficient thrust was available to reach Mach 3.2, a limit of Mach 2.83 had to be imposed as the engines tended to overspeed and overheat at higher airspeeds, possibly damaging them beyond repair.
The design cruising speed is Mach 2.35 with partial afterburner in operation. The maximum speed of Mach 2.83 is allowed to maintain no more than 5 minutes due to the danger of overheating of the airframe and fuel in the tanks. When the airframe temperature reaches, the warning lamp lights up, and the pilot must reduce airspeed. The use of a partial afterburner and a cruising flight altitude makes it possible to have a range only less than when flying Mach 0.9 at altitudes. The maximum altitude of flight without an afterburner in operation is. The poor fuel consumption in the subsonic regime, and hence range, is due to the engines having extremely low pressure ratio of just 4.75 at subsonic speeds. The specific fuel consumption of the engines is 1.12lb/ in cruise and 2.45lb/ with afterburners. For comparison purposes, this is 50% worse in cruise than the first generation of F100 engines from the F-15 Eagle, but the SFC with afterburners is actually nearly equal, though the F100 is a far newer engine design.