Fly system
A fly system, or theatrical rigging system, is a system of ropes, pulleys, counterweights and related devices within a theater that enables a stage crew to quickly, quietly and safely fly components such as curtains, lights, scenery, stage effects and, sometimes, people. Systems are typically designed to fly components between clear view of the audience and out of view, into the large space, the fly loft, above the stage.
Fly systems are often used in conjunction with other theatre systems, such as scenery wagons, stage lifts and stage turntables, to physically manipulate the mise en scène.
Theatrical rigging is most prevalent in proscenium theatres with stage houses designed specifically to handle the significant dead and live loads associated with fly systems. Building, occupational safety, and fire codes limit the types and quantity of rigging permitted in a theatre based on stage configuration. Theatrical rigging standards are developed and maintained by organizations such as USITT and ESTA.
The line set
The line set is the fundamental machine of a typical fly system.The function of a typical line set is to fly a slender beam known as a batten by hoisting it with lift lines. By hanging scenery, lighting, or other equipment on a batten, they in turn may also be flown. A batten is said to be "flying in" when it is being lowered toward the stage, and "flying out" when it is being raised into the fly space. Battens may be just a few feet in length or may extend from one wing of the stage to the other. A batten is suspended from above by at least two lift lines, but long battens may require six or more lift lines.
In manual rigging, a line set's lift lines support weights opposite their connections to the batten in order to balance the weight of the batten and whatever it carries. The lift lines are reeved through a series of pulleys, known as blocks, that are mounted above the stage to fly loft structure. An operating line allows riggers on the fly crew to raise and lower the batten.
Automated rigging sometimes uses weights to help balance line set loads in a manner similar to manual counterweight rigging. Otherwise it relies solely on the motor power of an electric hoist to fly a line set.
Together, a series of parallel line sets regularly spaced up and down stage, commonly at,, or centers, comprise the bulk of most fly systems. Theatrical rigging systems are made up of hemp, counterweight and/or automated line sets able to serve various functions.
Line set functions
Line sets are typically general purpose in function, meaning they can perform any number of functions which vary depending upon the requirements of a particular theatre production. For example, a general purpose line set can usually be quickly transformed into a drapery or scenery line set, but converting a general purpose line set into an electrical line set is more involved.When a line set has a predetermined, relatively permanent, function it is known as a dedicated line set. Line set functions include:
Drapery and track line set
Line sets often suspend theater drapes and stage curtains such as travelers, teasers, legs, cycs, scrims and tabs, as well as associated tracks, in order to mask and frame the stage and provide backdrops. Line sets are sometimes dedicated to particular draperies, such as the main curtain and main border that mask the proscenium opening, but drapery locations can often vary.Scenery line set
In many stage productions, theatrical scenery is mounted to line sets in order to be flown in and out so as to quickly change set pieces during the course of a performance. For example, painted soft and hard flats and are commonly used to depict settings. Also, three-dimensional sets may be flown.Electrical line set
Electrical line sets, commonly called electrics, are used to suspend and control lighting instruments and, in many cases, microphones and special effects equipment as well. Electrics may be temporarily "wired" with drop boxes or multicable fanouts dropped from the grid or draped from a fly gallery, or permanently wired with connector strips.There are normally at least three electrical line sets provided above the stage, with one just upstage of the proscenium wall, one mid-stage, and one just downstage of the cyclorama. Additional electrics are typically desirable.
Permanently wired electrical line sets are known as dedicated electrics, fixed electrics or house electrics. In addition to providing dimmed and switched outlets for lighting fixtures, connector strips may provide low-voltage controls, for data being sent to lights and other devices, as well as microphone jacks. Power often is fed to fixed electrics from terminal boxes at the grid deck via multicable. Single and double-purchase cable cradles mounted to lift lines can be used to drape the multicable, prolonging its lifespan and reducing the likelihood of conflict with adjacent line sets or lighting instruments. Pantographs are also used to drape the multicable feeding dedicated electric line sets.
Dedicated electrics typically employ truss battens to facilitate cable snaking and to maximize lighting positions. In large professional theatres, such as the Philadelphia Academy of Music, an electric may take the form of a flying bridge that provides a walkable platform for electrician access to fixtures and effects. Flying bridges may also be used for followspot positions.
Orchestra enclosure line set
It is not uncommon for the panels, known as clouds, of an orchestra shell to be flown. Larger, multi-use theaters that cannot have a static shell often make use of the fly system in this way. Before being flown the cloud is sometimes pivoted to a vertical orientation to minimize the space it requires for storage in the fly loft.Focus chair line set
A less common use for the fly system is the use of a focus chair system. This is a system where a small chair with fall protection equipment is suspended from a track that runs the length of a batten to which it is mounted. An electrician sits on the chair, and is flown out to the height of the electrics, to focus lighting instruments.Flying rig
Flying rigs are used to fly scenery or performers in a more elaborate fashion than typical line sets. A flying rig typically allows horizontal as well as vertical movement by paying out individual lift lines to varying lengths and/or through the use of tracks. Flying rigs usually involve specialized equipment and techniques operated by a relatively experienced crew. Peter Foy is known for his innovations in manual flying rigs, especially those used in theatrical productions of Peter Pan. Automated flying rigs, which synchronize multiple point hoists, are becoming more common as motor control systems become safer and more sophisticated.Fire safety curtain
A permanently installed fire curtain line set, though not used for productions, is a typical element of a theatrical rigging system installation. Building and fire codes typically require that either a fire/safety curtain or water deluge system be installed to separate an audience from the stage in the event of a fire.Types
Fly systems are broadly categorized as manual or automated. Manual fly systems are more specifically categorized as "hemp" or "counterweight" systems."Hemp houses" exclusively use the centuries-old tradition of ropes, pulleys and sandbags to fly theatrical scenery in and out. Hemp rigging incorporates many nautical rigging techniques and equipment, and was once thought to have stemmed from the nautical rigging. However, recent research has shown that this is not the case, Counterweight rigging evolved separately from hemp rigging and generally handles scenery in a more controlled fashion.
Counterweight rigging replaces the hemp rope and sandbags of rope line rigging with wire rope and metal counterweights, respectively. Those substitutions permit the flying of greater loads with a high degree of control, but with a loss of flexibility inherent to most hemp systems. Flexibility is lost because most components of a hemp system may be repositioned, while counterweight system components are relatively fixed. Old "hemp houses" lacked counterweight rigging, but today most manual rigging houses use a combination of counterweight rigging and, at least some, hemp rigging. For example, theaters that incorporate built-in, grid-based counterweight fly systems often will also support additional, spot hemp system line sets for spot-rigging.
Manual rigging is also possible with hand hoists, but relatively limited operating speeds preclude their use for most running applications.
Automated systems are becoming more prominent. They have the potential advantages of relatively high precision, speed and ease of control, but tend to be significantly more expensive than manual systems. Hoists of various types are used. A conventional counterweight system may be automated by the incorporation of a motor and controls, in what is commonly called a motor-assist system. By using counterweight in such a manner, motor sizes can be kept relatively small.
The use of a particular type of fly system in a theater usually does not preclude the use of other rigging methods in the same theater.
Hemp rigging system
A hemp fly system, so named for the manila hemp rope that was once common in theatrical rigging, is the oldest type of fly system, certainly the simplest type of system. Recent research shows that the hemp system, although known for centuries, was not much used. The hemp system gained popularity first in the United States in the mid nineteenth century. It soon gained popularity in England, as it was inexpensive and provided a great deal of flexibility for moving scenery. Hemp systems are also known as rope line systems, or simply as rope systems.Stage rigging techniques draw largely from ship rigging, as the earliest stagehands were actually sailors seeking employment while on shore leave. Because of this, there is common terminology between the two industries. For example, the stage is referred to as a deck in the manner of a ship's deck. Other expressions and technology that overlap the nautical and theatrical rigging worlds include: batten, belay, block, bo'sun, cleat, clew, crew, hitch, lanyard, pinrail, purchase, trapeze, and trim.
In a typical hemp system, a "line set" consists of multiple hemp lines running from a batten above the stage up to the grid, through loft blocks to a headblock and then down to the fly floor, where they are tied off in a group to a belaying pin on the pin rail. The lift lines and hand lines are one and the same. Typically, a lift line runs from the sand bag assigned to a specific line set, up to "a single loft block" above the fly floor and back down to the fly floor. A trim clamp or a "Sunday" is used to attach this sandbag to the "line set" to balance the load placed on the batten. The sandbags are usually filled to weigh slightly less than the load, making the line set "Batten-Heavy". When the flyman wishes to fly a batten "In", the flyman unties the "High" trim and allows the batten to travel "In" while the sandbags travel "Out" toward the grid. When the flyman wishes to fly the batten "Out", he pulls down on the operating lines and the batten flies out as the sand bag descends to the fly floor. This arrangement allows the flyman to control the speed of ascent and/or descent and provides greater safety for people on the stage below. The proper "Out/High" trim for the batten is set when the sand bag reaches the fly floor in its descent and the proper "In/Low" trim for the batten is established when the line set is fully extended. This makes it unnecessary to "spike" or "mark" either the line set or the lift line. The Hemp system relies on being slightly "batten-heavy" to allow the load to travel to the floor/deck. Because the ropes are flexible there is physically no way to move/push the sandbags "Out" if the weight on both sides is equal.
Another hand line, known as a jack line, may be used to lift the sandbags if they are heavier than the batten load. The jack line, which runs up to a loft block and back down to the trim clamp, is tied off to a belaying pin adjacent to the one used for the line sets lift lines, either at the same, or a secondary, pin rail.
Pulling on the hand lines of a hemp set flies a line set out. Pulling on the jack line flies a line set in.
Hemp systems can be easily configured for spot rigging, where lift lines must be frequently relocated. They are much less expensive and easier to install than counterweight fly systems, though somewhat more difficult to operate.