VAX
VAX is a series of computers featuring a 32-bit instruction set architecture and virtual memory that was developed and sold by Digital Equipment Corporation in the late 20th century. The VAX-11/780, introduced October 25, 1977, was the first of a range of popular and influential computers implementing the VAX ISA. The VAX family was a huge success for DEC, with the last members arriving in the early 1990s. The VAX was succeeded by the DEC Alpha, which included several features from VAX machines to make porting from the VAX easier.
Description
VAX was designed by Digital Equipment Corporation as a successor to the 16-bit PDP-11, one of the most successful minicomputers in history with approximately 600,000 units sold. The system was designed to offer backward compatibility with the PDP-11 while extending the memory to a full 32-bit implementation and adding demand paged virtual memory. The name VAX refers to its virtual address extension concept that allowed programs to make use of this newly available memory while still being compatible with unmodified user mode PDP-11 code. The name "VAX-11", used on early models, was chosen to highlight this capability. The VAX ISA is considered a complex instruction set computer design.DEC quickly dropped the −11 branding as PDP-11 compatibility was no longer a major concern. The line expanded to both high-end mainframes like the VAX 9000 as well as to the workstation-scale systems like the VAXstation series. The VAX family ultimately contained ten distinct designs and over 100 individual models in total. All of them were compatible with each other and normally ran the VAX/VMS operating system.
VAX has been perceived as the quintessential CISC ISA, with its very large number of assembly language programmer-friendly addressing modes and machine instructions, highly orthogonal instruction set architecture, and instructions for complex operations such as queue insertion or deletion, number formatting, and polynomial evaluation.
Name
The name "VAX" originated as an acronym for virtual address extension, both because the VAX was seen as a 32-bit extension of the 16-bit PDP-11 and because it was an early adopter of virtual memory to manage this larger address space.Early versions of the VAX processor implement a "compatibility mode" that emulates many of the PDP-11's instructions, giving it the 11 in VAX-11 to highlight this compatibility. Later versions offloaded the compatibility mode and some of the less used CISC instructions to emulation in the operating system software.
Instruction set
The VAX instruction set was designed to be powerful, orthogonal, and "compiler-friendly". When it was introduced, many programs were written in assembly language, so having a "programmer-friendly" instruction set was important. In time, as more programs were written in high-level programming languages, the instruction set became less visible, and the only ones much concerned about it were compiler writers.One unusual aspect of the VAX instruction set is the presence of register masks at the start of each subprogram. These are arbitrary bit patterns that specify, when control is passed to the subprogram, which registers are to be preserved. On most architectures, it is up to the compiler to produce instructions to save out the needed data, typically using the call stack for temporary storage. On the VAX, with 16 registers, this might require 16 instructions to save the data and another 16 to restore it. Using the mask, a single 16-bit value performs the same operations internally in hardware, saving time and memory.
Since register masks are a form of data embedded within the executable code, they can make linear parsing of the machine code difficult. This can complicate optimization techniques that are applied on machine code.
Operating systems
The native VAX operating system is Digital's VAX/VMS ; it was renamed to OpenVMS in 1991 or early 1992 when it was ported to Alpha, modified to comply with POSIX standards, and branded as compliant with XPG4 by the X/Open consortium. The company wanted to avoid VAX having many incompatible operating systems like PDP-11; VAX and VMS were "engineered concurrently" to take maximum advantage of each other, as was the initial implementation of the VAXcluster facility.During the 1980s, a hypervisor for the VAX architecture named VMM, also known as the VAX Security Kernel, was developed at Digital with the aim of allowing multiple isolated instances of VMS and ULTRIX to be run on the same hardware. VMM was intended to achieve TCSEC A1 compliance. By the late 1980s, it was operational on VAX 8000 series hardware, but was abandoned before release to customers.
Other VAX operating systems have included various releases of Berkeley Software Distribution UNIX up to 4.3BSD, Ultrix-32, VAXELN, and Xinu. More recently, NetBSD and OpenBSD have supported various VAX models and some work has been done on porting Linux to the VAX architecture. OpenBSD discontinued support for the architecture in September 2016.
History
VAX design began in 1975, about when DEC recognized that PDP-11's 16-bit architecture was too limiting in the amount of addressable memory. The first VAX model sold was the VAX-11/780, introduced on October 25, 1977 at DEC's annual shareholder meeting. Bill Strecker, C. Gordon Bell's doctoral student at Carnegie Mellon University, was responsible for the architecture. Like PDP-11, VAX was very successful; it provided the majority of DEC's sales, sales growth, and profit from the early 1980s to early 1990s. VAX and VMS became DEC's only actively developed computer architecture. Many different models with different prices, performance levels, and capacities were subsequently created. VAX superminicomputers were very popular in the early 1980s.For a while the VAX-11/780 was used as a standard in CPU benchmarks. It was initially described as a one-MIPS machine, because its performance was equivalent to an IBM System/360 that ran at one MIPS, and the System/360 implementations had previously been de facto performance standards. The actual number of instructions executed in 1 second was about 500,000, which led to complaints of marketing exaggeration. The result was the definition of a "VAX MIPS", the speed of a VAX-11/780; a computer performing at 27 VAX MIPS would run the same program roughly 27 times faster than the VAX-11/780.
Within the Digital community the term VUP was the more common term, because MIPS do not compare well across different architectures. The related term cluster VUPs was informally used to describe the aggregate performance of a VAXcluster. The VAX-11/780 included a subordinate stand-alone LSI-11 computer that performed microcode load, booting, and diagnostic functions for the parent computer. This was dropped from subsequent VAX models. Enterprising VAX-11/780 users could therefore run three different Digital Equipment Corporation operating systems: VMS on the VAX processor, and either RSX-11S or RT-11 on the LSI-11.
The VAX went through many different implementations. The original VAX 11/780 was implemented in TTL and filled a four-by-five-foot cabinet with a single CPU. Through the 1980s, the high-end of the family was continually improved using ever-faster discrete components, an evolution that ended with the introduction of the VAX 9000 in October 1989. This design proved too complex and expensive and was ultimately abandoned not long after introduction. CPU implementations that consisted of multiple emitter-coupled logic gate array or macrocell array chips included the VAX 8600 and 8800 superminis and finally the VAX 9000 mainframe class machines. CPU implementations that consisted of multiple MOSFET custom chips included the 8100 and 8200 class machines. The VAX 11-730 and 725 low-end machines were built using AMD Am2901 bit-slice components for the ALU.
The MicroVAX I represented a major transition within the VAX family. At the time of its design, it was not yet possible to implement the full VAX architecture as a single VLSI chip. Instead, the MicroVAX I was the first VAX implementation to move some of the more complex VAX instructions into emulation software. This partitioning substantially reduced the amount of microcode required and was referred to as the "MicroVAX" architecture. In the MicroVAX I, the ALU and registers were implemented as a single gate-array chip while the rest of the machine control was conventional logic.
A full VLSI implementation of the MicroVAX architecture arrived with the MicroVAX II's 78032 CPU and 78132 FPU. The 78032 was the first microprocessor with an on-board memory management unit The MicroVAX II was based on a single, quad-sized processor board which carried the processor chips and ran the MicroVMS or Ultrix-32 operating systems. The machine featured 1 MB of on-board memory and a Q22-bus interface with DMA transfers. The MicroVAX II was succeeded by many further MicroVAX models with much improved performance and memory.
Further VLSI VAX processors followed in the form of the V-11, CVAX, CVAX SOC, Rigel, Mariah and NVAX implementations. The VAX microprocessors extended the architecture to inexpensive workstations and later also supplanted the high-end VAX models. This wide range of platforms using one architecture was unique in the computer industry at that time. Sundry graphics were etched onto the CVAX microprocessor die. The phrase CVAX... when you care enough to steal the very best was etched in broken Russian as a play on a Hallmark Cards slogan, intended as a message to Soviet engineers who were known to be both purloining DEC computers for military applications and reverse engineering their chip design. By the late 1980s, the VAX microprocessors had grown in power to be competitive with discrete designs. This led to the abandonment of the 8000 and 9000 series and their replacement by Rigel-powered models of the VAX 6000, and later by NVAX-powered VAX 7000 systems.
Extrapolating from Moore's Law, DEC expected that VAX's 32-bit design would be a viable architecture until about 1999. The company did not foresee that RISC would, during the 1980s, usurp traditional computing architectures with significantly more performance per cost. As Unix RISC systems from Sun Microsystems and others lured VAX customers, in 1989 DEC introduced a range of RISC workstations and servers that ran Ultrix, the DECstation and DECsystem respectively, using processors from MIPS Computer Systems. In 1992 DEC introduced its own RISC instruction set architecture, the Alpha AXP, and their own Alpha-based microprocessor, the DECchip 21064, a high performance 64-bit design capable of running OpenVMS.
In August 2000, Compaq announced that the remaining VAX models would be discontinued by the end of the year, but old systems remain in widespread use. The Stromasys CHARON-VAX and SIMH software-based VAX emulators remain available. VMS is now developed by VMS Software Incorporated, albeit only for the Alpha, HPE Integrity, and x86-64 platforms.