Barrage (artillery)
In military usage, a barrage is massed sustained artillery fire aimed at a series of points along a line. In addition to attacking any enemy in the kill zone, a barrage intends to suppress enemy movements and deny access across that line of barrage. The impact points along the line may be apart, with the total line length of the barrage zone anything from a few hundred to several thousand yards long. Barrages can consist of multiple such lines, usually about apart, with the barrage shifting from one line to the next over time, or several lines may be targeted simultaneously.
A barrage may involve a few or many artillery batteries, or even a single gun. Typically each gun in a barrage, using indirect fire, will fire continuously at a steady rate at its assigned point for an assigned time before moving onto the next target, following the barrage's detailed timetable. Barrages typically use high-explosive shells, but may also be shrapnel, smoke, illumination, poison gas, or potentially other chemical agents. Barrages are in contrast with concentrated artillery fire, which has a single specific target such as a known enemy position or structure, and in contrast with direct fire which targets enemies within the direct line of sight of the gun.
Barrages may be used defensively or offensively, and have a variety of patterns. Defensive ones are often static while offensive ones are moved in coordination with the advancing friendly troops. They may target along the front line, or further into enemy back area to isolate certain enemy positions. A series of different patterns may be employed as a battle develops, with each barrage lasting only a few minutes or many hours. Barrages are usually integral with larger operations of multiple military formations, from divisions to armies, requiring days to weeks of preparation and exact planning.
The barrage was developed by the British Army in the Second Boer War. It came to prominence in World War I, notably its use by the British Expeditionary Force and particularly from late 1915 onwards when the British realized that the suppressive effects of artillery to provide covering fire were the key to breaking into defensive positions. By late 1916 the creeping barrage was the standard means of applying artillery fire to support an infantry attack, with the infantry following the advancing barrage as closely as possible. Its employment in this way recognised the importance of artillery fire in suppressing or neutralizing, rather than destroying, the enemy. It was found that a moving barrage immediately followed by the infantry assault could be far more effective than weeks of preliminary bombardment.
Barrages remained in use in World War II and later, but only as one of a variety of artillery tactics made possible by improvements in predicted fire, target location and communications. The term barrage is widely - and technically incorrectly - used in the popular media for any artillery fire.
Development
The moving barrage was developed during the Boer War, one of several tactical innovations instituted under command of General Redvers Buller. It was a response to Boer defensive positions, notably at Tugela Heights and effective long range rifle fire.Artillery usually fired over open sights at visible targets, until the Second Boer War when indirect fire started to be used. The largest unit accustomed to firing at a single target was the brigade, normally 18 guns. Trench warfare led to the necessity for indirect firing through the use of observers, more sophisticated artillery fire plans and an increasingly scientific approach to gunnery. Gunners had to use increasingly complicated calculations to lay the guns. Individual guns were aimed so that their fall of shot was co-ordinated with others to form a pattern; in the case of a barrage, the pattern was a line. The term “barrage” was first used in World War I in English in the orders for the Battle of Neuve Chapelle in 1915.
A lifting barrage was a development in which the barrage lifted periodically to a target further back, such as a second line of trenches. This was countered by the defenders infiltrating troops and machine guns into no-man's land or the areas between their own trench lines, so it was found necessary to comb the entire area of the advance with artillery fire.
Creeping barrage
A creeping barrage was a barrage that lifted in small increments, usually 50 to 100 yards every few minutes, moving forward slowly, keeping pace with the infantry. British practice evolved to fire at two lines simultaneously. Eventually, three patterns of advancing the barrage developed. In a creeping barrage, the shell-fire moved from one line to the next. In a block barrage two or more lines were fired on simultaneously and then the fire moved as block to the next lines to be engaged. In a rolling barrage, the fire on the line nearest to their own troops moved to the first unengaged line behind then after a set interval the fire on the second line would move in turn to the next one behind that.By late 1917, the technique of a creeping barrage had been perfected and could be made to move in complex ways, the barrage wheeling or even combing back and forth, to catch the defenders re-emerging after the barrage had passed but it was still governed by a timetable. A creeping barrage that was too slow would risk friendly fire on one's advancing troops; too quickly could mean that the enemy would have too much time to emerge from cover to resume defensive positions and attack the exposed advancing troops. After World War I the British developed the "quick barrage", a standard barrage pattern that could be ordered by radio without advance plotting of the fire plan on a map.
Standing and box barrages
A standing barrage was static, and might be defensive, to inhibit the movement of enemy troops and break up attacks. A creeping barrage could be made to stand on a line for a time before it moved on, perhaps waiting for the infantry to form up behind it, or to catch up, or perhaps it would stand on the line of known enemy defences, to do more damage and sap enemy morale. The fireplan for the Battle of Messines on 7 June 1917 called for most of the British 18-pounder field guns to fire a creeping barrage of shrapnel immediately ahead of the advance, while the other field guns and howitzers fired a standing barrage some ahead.The standing barrage was aligned with known German positions, and lifted to the next target when the advance reached within of it. As each objective was taken by the infantry, the creeping barrage would pause at ahead of them and become a standing barrage, protecting the newly gained positions from counter-attack while the infantry consolidated. During this time the pace of fire slackened to one round per gun a minute, enabling the guns and the crews a respite before resuming full intensity as the barrage moved on. The heavy and super-heavy artillery fired on German rear areas. Over 700 machine guns participated in the barrage, using indirect fire over the heads of their own troops.
In a box barrage three or four barrages formed a box – or more often three sides of a box – around a position to isolate it. Standing or box barrages were often used for defensive fire tasks, in which the barrage was registered beforehand on a position – agreed with the defending infantry commander – to be called down in the event of an enemy attack on his positions. A box barrage could also be used to prevent the enemy from reinforcing a position to be attacked. In a trench raid of March 1917, the 1st Battalion the Buffs were supported first by a creeping barrage, then by a box barrage once they were in the enemy trenches, to prevent German reinforcement or counter-attack. It was aided with dummy bombardments on other sections of the line to confuse the enemy.
Advantages and drawbacks
It was soon appreciated how important it was for the attacking troops to follow the barrage closely, without allowing time for the defenders to recover from the shock of bombardment and emerge from their dug-outs; the French reckoned they should be suffering 10% of their casualties from their own artillery if they were close enough to the barrage. Ideally the attackers should be into the enemy positions before the defenders had time to recover their composure after the terror of an intense bombardment, emerge from shelters and man their firing positions. On the First day of the Somme, and in the later French Nivelle Offensive on the Chemin des Dames, the barrage outpaced the infantry, allowing the defenders to recover and emerge from their dug-outs, with disastrous results for the attackers. By the end of World War I it was realised that the important effect of the barrage was to demoralise and suppress the enemy, rather than physical destruction; a short, intense bombardment immediately followed by infantry assault was more effective than the weeks of grinding bombardment used in 1916.A creeping barrage could maintain the element of surprise, with the guns opening fire only shortly before the assault troops moved off. It was useful when enemy positions had not been thoroughly reconnoitred, as it did not depend on identifying individual targets in advance. On the other hand, it was wasteful of ammunition and guns, as much of the fire would inevitably fall on ground containing no enemy.
The World War I barrage with programmed lifts had the effect of confining the infantry advance to the artillery schedule, and of requiring the use of linear tactics, restricting infantry manoeuvre. Infiltration tactics later proved more effective than advancing in rigid lines, and the infiltration phase of German stormtrooper attacks could not use a creeping barrage; but the opening phase of the German spring offensive was still supported by a massive creeping barrage, containing a heavy mix of gas shells. The importance of the barrage was such that traditional infantry tactics, such as reliance on the infantry's own firepower to support its movement, were sometimes forgotten.
In the featureless Western Desert in World War II, one benefit of the barrage was that it enabled the infantry to conform their line to the barrage, ensuring that their line of advance was correct. By 1943 the barrage was considered to dissipate firepower and to constrain the infantry into advancing in rigid lines.
A barrage could severely churn up the ground, especially in soft going, and impede the progress of the attacking troops.