AM broadcasting
AM broadcasting is radio broadcasting using amplitude modulation transmissions. It was the first method developed for making audio radio transmissions, and is still used worldwide, primarily for medium wave transmissions, but also on the longwave and shortwave radio bands.
The earliest experimental AM transmissions began in the early 1900s. However, widespread AM broadcasting was not established until the 1920s, following the development of vacuum tube receivers and transmitters. AM radio remained the dominant method of broadcasting for the next 30 years, a period called the "Golden Age of Radio", until television broadcasting became widespread in the 1950s and received much of the programming previously carried by radio. Later, AM radio's audiences declined greatly due to competition from FM radio, digital radio, satellite radio, Internet radio, music streaming services, and podcasting.
Compared to FM or digital transmissions, AM transmissions are more expensive to transmit due to the necessity of having to transmit a high power carrier wave to overcome ground losses, and the large antenna radiators required at the low broadcast frequencies, but can be sent over long distances via the ionosphere at night; however, they are much more susceptible to interference, and often have lower audio fidelity. Thus, AM broadcasters tend to specialize in spoken-word formats, such as talk radio, all-news radio and sports radio, with music formats primarily for FM and digital stations.
History
Early broadcasting development
The idea of broadcasting — the unrestricted transmission of signals to a widespread audience — dates back to the founding period of radio development, even though the earliest radio transmissions, originally known as "Hertzian radiation" and "wireless telegraphy", used spark-gap transmitters that could only transmit the dots-and-dashes of Morse code. In October 1898, a London publication, The Electrician, noted that "there are rare cases where, as Dr. Oliver Lodge| Lodge once expressed it, it might be advantageous to 'shout' the message, spreading it broadcast to receivers in all directions". However, it was recognized that this would involve significant financial issues, as that same year The Electrician also commented "did not Prof. Lodge forget that no one wants to pay for shouting to the world on a system by which it would be impossible to prevent non-subscribers from benefiting gratuitously?"On January 1, 1902, Nathan Stubblefield gave a short-range "wireless telephone" demonstration, that included simultaneously broadcasting speech and music to seven locations throughout Murray, Kentucky. However, this was transmitted using induction rather than radio signals, and although Stubblefield predicted that his system would be perfected so that "it will be possible to communicate with hundreds of homes at the same time", and "a single message can be sent from a central station to all parts of the United States", he was unable to overcome the inherent distance limitations of this technology.
The earliest public radiotelegraph broadcasts were provided as government services, beginning with daily time signals inaugurated on January 1, 1905, by a number of U.S. Navy stations. In Europe, signals transmitted from a station located on the Eiffel Tower were received throughout much of Europe. In both the United States and France this led to a small market of receiver lines geared for jewelers who needed accurate time to set their clocks, including the Ondophone in France, and the De Forest RS-100 Jewelers Time Receiver in the United States
The ability to pick up time signal broadcasts, in addition to Morse code weather reports and news summaries, also attracted the interest of amateur radio enthusiasts.
Early amplitude modulation (AM) transmitter technologies
It was immediately recognized that, much like the telegraph had preceded the invention of the telephone, the ability to make audio radio transmissions would be a significant technical advance. Despite this knowledge, it still took two decades to perfect the technology needed to make quality audio transmissions. In addition, the telephone had rarely been used for distributing entertainment, outside of a few "telephone newspaper" systems, most of which were established in Europe, beginning with the Paris Théâtrophone. With this in mind, most early radiotelephone development envisioned that the device would be more profitably developed as a "wireless telephone" for personal communication, or for providing links where regular telephone lines could not be run, rather than for the uncertain finances of broadcasting.File:Crystal radio advertisement.png|thumb|upright=1.3|A family listening to an early broadcast using a crystal radio receiver in 1922. Crystal sets, used before the advent of vacuum tube radios in the 1920s, could not drive loudspeakers, so the family had to listen on earphones.
The person generally credited as the primary early developer of AM technology is Canadian-born inventor Reginald Fessenden. The original spark-gap radio transmitters were impractical for transmitting audio, since they produced discontinuous pulses known as "damped waves". Fessenden realized that what was needed was a new type of radio transmitter that produced steady "undamped" signals, which could then be "modulated" to reflect the sounds being transmitted.
Fessenden's basic approach was disclosed in U.S. Patent 706,737, which he applied for on May 29, 1901, and was issued the next year. It called for the use of a high-speed alternator that generated "pure sine waves" and produced "a continuous train of radiant waves of substantially uniform strength", or, in modern terminology, a continuous-wave transmitter. Fessenden began his research on audio transmissions while doing developmental work for the United States Weather Service on Cobb Island, Maryland. Because he did not yet have a continuous-wave transmitter, initially he worked with an experimental "high-frequency spark" transmitter, taking advantage of the fact that the higher the spark rate, the closer a spark-gap transmission comes to producing continuous waves. He later reported that, in the fall of 1900, he successfully transmitted speech over a distance of about 1.6 kilometers, which appears to have been the first successful audio transmission using radio signals. However, at this time the sound was far too distorted to be commercially practical. For a time he continued working with more sophisticated high-frequency spark transmitters, including versions that used compressed air, which began to take on some of the characteristics of arc-transmitters. Fessenden attempted to sell this form of radiotelephone for point-to-point communication, but was unsuccessful.
Alternator transmitter
Fessenden's work with high-frequency spark transmissions was only a temporary measure. His ultimate plan for creating an audio-capable transmitter was to redesign an electrical alternator, which normally produced alternating current of at most a few hundred, to increase its rotational speed and so generate currents of tens-of-thousands Hz, thus producing a steady continuous-wave transmission when connected to an aerial. The next step, adopted from standard wire-telephone practice, was to insert a simple carbon microphone into the transmission line, to modulate the carrier wave signal to produce AM audio transmissions. However, it would take many years of expensive development before even a prototype alternator-transmitter would be ready, and a few years beyond that for high-power versions to become available.Fessenden worked with General Electric's Ernst F. W. Alexanderson, who in August 1906, delivered an improved model which operated at a transmitting frequency of approximately 50 kHz, although at low power. The alternator-transmitter achieved the goal of transmitting quality audio signals, but the lack of any way to amplify the signals meant they were somewhat weak. On December 21, 1906, Fessenden made an extensive demonstration of the new alternator-transmitter at Brant Rock, Massachusetts, showing its utility for point-to-point wireless telephony, including interconnecting his stations to the wire telephone network. As part of the demonstration, speech was transmitted 18 kilometers to a listening site at Plymouth, Massachusetts.
An American Telephone Journal account of the December 21 alternator-transmitter demonstration included the statement that "It is admirably adapted to the transmission of news, music, etc. as, owing to the fact that no wires are needed, simultaneous transmission to many subscribers can be effected as easily as to a few", echoing the words of a handout distributed to the demonstration witnesses, which stated " Telephony is admirably adapted for transmitting news, stock quotations, music, race reports, etc. simultaneously over a city, on account of the fact that no wires are needed and a single apparatus can distribute to 10,000 subscribers as easily as to a few. It is proposed to erect stations for this purpose in the large cities here and abroad." However, other than two holiday transmissions reportedly made shortly after these demonstrations, Fessenden does not appear to have conducted any radio broadcasts for the general public, or to have even given additional thought about the potential of a regular broadcast service, and in a 1908 article providing a comprehensive review of the potential uses for his radiotelephone invention, he made no references to broadcasting.
Because there was no way to amplify electrical currents at this time, modulation was usually accomplished by a carbon microphone inserted directly in the antenna wire. This meant that the full transmitter power flowed through the microphone, and even using water cooling, the power handling ability of the microphones severely limited the power of the transmissions. Ultimately only a small number of large and powerful Alexanderson alternators would be developed. However, they would be almost exclusively used for long-range radiotelegraph communication, and occasionally for radiotelephone experimentation, but were never used for general broadcasting.