Power-to-gas

Power-to-gas is a technology that uses electric power to produce a gaseous fuel.
Most P2G systems use electrolysis to produce hydrogen. The hydrogen can be used directly, or further steps may convert the hydrogen into syngas, methane, or LPG.
Single-stage P2G systems to produce methane also exist, such as reversible solid oxide cell technology.
Produced gas, just like natural gas or industrially produced hydrogen or methane, is a commodity and may be used as such through existing infrastructure, including back to power at a loss. However, provided the power comes from renewable energy, it can be touted as a carbon-neutral fuel, renewable, and a way to store variable renewable energy.

Power-to-hydrogen

All current P2G systems start by using electricity to split water into hydrogen and oxygen by means of electrolysis. In a "power-to-hydrogen" system, the resulting hydrogen is injected into the natural gas grid or is used in transport or industry rather than being used to produce another gas type.
ITM Power won a tender in March 2013 for a Thüga Group project, to supply a 360 kW self-pressurising high-pressure electrolysis rapid response proton exchange membrane electrolyser Rapid Response Electrolysis Power-to-Gas energy storage plant. The unit produces 125 kg/day of hydrogen gas and incorporates AEG power electronics. It will be situated at a Mainova AG site in the Schielestraße, Frankfurt in the state of Hessen. The operational data will be shared by the whole Thüga group – the largest network of energy companies in Germany with around 100 municipal utility members. The project partners include: badenova AG & Co. kg, Erdgas Mittelsachsen GmbH, Energieversorgung Mittelrhein GmbH, erdgas schwaben GmbH, Gasversorgung Westerwald GmbH, Mainova Aktiengesellschaft, Stadtwerke Ansbach GmbH, Stadtwerke Bad Hersfeld GmbH, Thüga Energienetze GmbH, WEMAG AG, e-rp GmbH, ESWE Versorgungs AG with Thüga Aktiengesellschaft as project coordinator. Scientific partners will participate in the operational phase. It can produce 60 cubic metres of hydrogen per hour and feed 3,000 cubic metres of natural gas enriched with hydrogen into the grid per hour. An expansion of the pilot plant is planned from 2016, facilitating the full conversion of the hydrogen produced into methane to be directly injected into the natural gas grid.
In December 2013, ITM Power, Mainova, and NRM Netzdienste Rhein-Main GmbH began injecting hydrogen into the German gas distribution network using ITM Power HGas, which is a rapid response proton exchange membrane electrolyser plant. The power consumption of the electrolyser is 315 kilowatts. It produces about 60 cubic meters per hour of hydrogen and thus in one hour can feed 3,000 cubic meters of hydrogen-enriched natural gas into the network.
On August 28, 2013, E.ON Hanse, Solvicore, and Swissgas inaugurated a commercial power-to-gas unit in Falkenhagen, Germany. The unit, which has a capacity of two megawatts, can produce 360 cubic meters of hydrogen per hour. The plant uses wind power and Hydrogenics electrolysis equipment to transform water into hydrogen, which is then injected into the existing regional natural gas transmission system. Swissgas, which represents over 100 local natural gas utilities, is a partner in the project with a 20 percent capital stake and an agreement to purchase a portion of the gas produced. A second 800 kW power-to-gas project has been started in Hamburg/Reitbrook district and is expected to open in 2015.
In August 2013, a 140 MW wind park in Grapzow, Mecklenburg-Vorpommern owned by E.ON received an electrolyser. The hydrogen produced can be used in an internal combustion engine or can be injected into the local gas grid. The hydrogen compression and storage system stores up to 27 MWh of energy and increases the overall efficiency of the wind park by tapping into wind energy that otherwise would be wasted. The electrolyser produces 210 Nm³/h of hydrogen and is operated by RH2-WKA.
The INGRID project started in 2013 in Apulia, Italy. It is a four-year project with 39 MWh storage and a 1.2 MW electrolyser for smart grid monitoring and control. The hydrogen is used for grid balancing, transport, industry, and injection into the gas network.
The surplus energy from the 12 MW Prenzlau Windpark in Brandenburg, Germany will be injected into the gas grid from 2014 on.
The 6 MW Energiepark Mainz from Stadtwerke Mainz, RheinMain University of Applied Sciences, Linde and Siemens in Mainz will open in 2015.
Power to gas and other energy storage schemes to store and utilize renewable energy are part of Germany's Energiewende.
In France, the MINERVE demonstrator of AFUL Chantrerie aims to promote the development of energy solutions for the future with elected representatives, companies and more generally civil society. It aims to experiment with various reactors and catalysts. The synthetic methane produced by the MINERVE demonstrator is recovered as CNG fuel, which is used in the boilers of the AFUL Chantrerie boiler plant. The installation was designed and built by the French SME Top Industrie, with the support of Leaf. In November 2017 it achieved the predicted performance, 93.3% of CH₄. This project was supported by the ADEME and the ERDF-Pays de la Loire Region, as well as by several other partners: Conseil départemental de Loire -Atlantic, Engie-Cofely, GRDF, GRTGaz, Nantes-Metropolis, Sydela and Sydev.
A full scale 1GW electrolyzer operated by EWE and Tree Energy Solutions is planned at the gas terminal in Wilhelmshaven, Germany. The first 500 MW is expected to begin operation in 2028. Wilhelmshaven can accommodate a second plant, bringing total potential capacity to 2GW.

Grid injection without compression

The core of the system is a proton exchange membrane electrolyser. The electrolyser converts electrical energy into chemical energy, which in turn facilitates the storage of electricity. A gas mixing plant ensures that the proportion of hydrogen in the natural gas stream does not exceed two per cent by volume, the technically permissible maximum value when a natural gas filling station is situated in the local distribution network. The electrolyser supplies the hydrogen-methane mixture at the same pressure as the gas distribution network, namely 3.5 bar.

Power-to-methane

A power-to-methane system combines hydrogen from a power-to-hydrogen system with carbon dioxide to produce methane using a methanation reaction such as the Sabatier reaction or biological methanation resulting in an extra energy conversion loss of 8%, the methane may then be fed into the natural gas grid if the purity requirement is reached.
ZSW and SolarFuel GmbH realized a demonstration project with 250 kW electrical input power in Stuttgart, Germany. The plant was put into operation on October 30, 2012.
The first industry-scale Power-to-Methane plant was realized by ETOGAS for Audi AG in Werlte, Germany. The plant with 6 MW electrical input power is using CO₂ from a waste-biogas plant and intermittent renewable power to produce synthetic natural gas which is directly fed into the local gas grid. The plant is part of the Audi e-fuels program. The produced synthetic natural gas, named Audi e-gas, enables CO₂-neutral mobility with standard CNG vehicles. Currently it is available to customers of Audi's first CNG car, the Audi A3 g-tron.
In April 2014 the European Union's co-financed and from the KIT coordinated HELMETH research project started. The objective of the project is the proof of concept of a highly efficient Power-to-Gas technology by thermally integrating high temperature electrolysis with CO₂-methanation.
Through the thermal integration of exothermal methanation and steam generation for the high temperature steam electrolysis conversion efficiency > 85% are theoretically possible. The process consists of a pressurized high-temperature steam electrolysis and a pressurized CO₂-methanation module.
The project was completed in 2017 and achieved an efficiency of 76% for the prototype with an indicated growth potential of 80% for industrial scale plants. The operating conditions of the CO₂-methanation are a gas pressure of 10 - 30 bar, a SNG production of 1 - 5.4 m³/h and a reactant conversion that produces SNG with H₂ < 2 vol.-% resp. CH₄ > 97 vol.-%. Thus, the generated substitute natural gas can be injected in the entire German natural gas network without limitations. As a cooling medium for the exothermic reaction boiling water is used at up to 300 °C, which corresponds to a water vapour pressure of about 87 bar. The SOEC works with a pressure of up to 15 bar, steam conversions of up to 90% and generates one standard cubic meter of hydrogen from 3.37 kWh of electricity as feed for the methanation.
The technological maturity of Power to Gas is evaluated in the European 27 partner project STORE&GO, which started in March 2016 with a runtime of four years. Three different technological concepts are demonstrated in three different European countries. The technologies involved include biological and chemical methanation, direct capture of CO₂ from atmosphere, liquefaction of the synthesized methane to bio-LNG, and direct injection into the gas grid. The overall goal of the project is to assess those technologies and various usage paths under technical, economic,
and legal aspects to identify business cases on the short and on the long term. The project is co-funded by the European Union's Horizon 2020 research and innovation programme and the Swiss government, with another 4 million euro coming from participating industrial partners. The coordinator of the overall project is the research center of the
DVGW located at the KIT.

Microbial methanation

The biological methanation combines both processes, the electrolysis of water to form hydrogen and the subsequent CO₂ reduction to methane using this hydrogen. During this process, methane forming microorganisms release enzymes that reduce the overpotential of a non-catalytic electrode so that it can produce hydrogen. This microbial power-to-gas reaction occurs at ambient conditions, i.e. room temperature and pH 7, at efficiencies that routinely reach 80-100%. However, methane is formed more slowly than in the Sabatier reaction due to the lower temperatures. A direct conversion of CO₂ to methane has also been postulated, circumventing the need for hydrogen production.
Microorganisms involved in the microbial power-to-gas reaction are typically members of the order Methanobacteriales. Genera that were shown to catalyze this reaction are Methanobacterium, Methanobrevibacter, and Methanothermobacter.