Mattress
A mattress is a large, usually rectangular pad for supporting a person lying down, especially for sleeping. It is designed to be used as a bed, or on a bed frame as part of a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, containing materials such as hair, straw, cotton, foam, rubber, or a framework of metal springs. Mattresses may also be filled with air or water.
Mattresses are usually placed on top of a bed base which may be solid, as in the case of a platform bed, or elastic, such as an upholstered wood and wire box spring or a slatted foundation. Popular in Europe, a divan incorporates both mattress and foundation in a single upholstered, footed unit. Divans have at least one innerspring layer as well as cushioning materials. They may be supplied with a secondary mattress or a removable "topper". Mattresses may also be filled with air or water, or a variety of natural fibers, such as in futons. Kapok is a common mattress material in Southeast Asia, and coir in South Asia.
History
A third-century BCE papyrus mentions a man named Krotos who is "waiting in Jaffa for an opportunity of exporting... and mattresses."The word mattress derives from the Arabic مَطْرَحٌ which means "something thrown down" or "place where something is thrown down" and hence "mat, cushion". During the Crusades, Europeans adopted one of the Middle Eastern methods of sleeping on cushions on the floor since sleeping on beds in the Middle East was for the wealthy. The word materas eventually descended into Middle English through the Romance languages. The oldest known mattress dates to around 77,000 years ago from South Africa and consisted of layers of twigs and leaves, notably including the leaves from Cryptocarya woodii which serves as a natural insect repellent and is believed to have served the additional purpose of repelling mosquitos. Preventing or reducing the number of mosquito bites would have reduced the chance malaria, which continues to be spread by mosquitos throughout Africa to this day and has been estimated to be the single most common cause of death among humans historically, estimated to have caused the death of roughly half of humans that have ever lived throughout history.
Early mattresses contained a variety of natural materials including straw, feathers or horsehair. In the first half of the 20th century, a typical mattress sold in North America had an innerspring core and cotton batting or fiberfill. Modern mattresses usually contain either an inner spring core or materials such as latex, viscoelastic or other flexible polyurethane foams. Other fill components include insulator pads over the coils that prevent the bed's upholstery layers from cupping down into the innerspring, as well as polyester fiberfill in the bed's top upholstery layers. In 1899 James Marshall introduced the first individually wrapped pocketed spring coil mattress now commonly known as Marshall coils.
In North America, the typical mattress sold today is an innerspring; however, there is increasing interest in all-foam beds and hybrid beds, which include both an innerspring and high-end foams such as viscoelastic or latex in the comfort layers. In Europe, polyurethane foam cores and latex cores have long been popular. These make up a much larger proportion of the mattresses sold in the continent.
Construction
A conventional mattress consists of two primary sections – a core or "support layer" and the upholstery or "comfort layer" – wrapped in a thick fabric called the ticking.Upholstery layers cover the mattress and provide cushioning and comfort. The upholstery layer consists of three parts: the insulator, the middle upholstery, and the quilt.
Sizes
Mattresses are typically made to conform to bed sizing standards that vary by market. The size of mattress varies between national standards in width and height and depth. Many countries use non-numeric labels such as "King", "Queen", "Double", "Full" or "Single" to represent these dimensions.Mattress topper
A mattress topper is a thin mattress, usually thick. Stand-alone mattresses of this size exist. But "mattress topper"s are usually sold for use on top of boxsprings. They are used to extend the life of the more-expensive boxspring, make a bed warmer or cooler, make a firm bed softer, and for travel and dorms, as they are portable, especially if they are low-density.Like a mattress protector/mattress pad/mattress cover, mattress toppers can be used to protect the mattress from the sleeper or vice versa. Some mattress toppers are machine-washable; covers and fillings are made from a range of materials.
Types
Tick mattress
A tick mattress is a bag made of ticking, filled with some suitable material. A paillasse or a featherbed is a tick mattress, as are most futons. They are simply constructed and were traditionally homemade. Because they are fairly thin and light, they are layered to form a bed.Innerspring
Innerspring mattresses commonly consist of just the spring core, and the top and bottom upholstery layers.Core
The core of the mattress supports the sleeper's body. Modern spring mattress cores, often called "innersprings" are made up of steel coil springs, or "coils".The gauge of the coils is one factor which determines firmness and support. Coils are measured in quarter increments. The lower the number, the thicker the spring. In general, higher-quality mattress coils have a 14-gauge diameter. Coils of 14 to 15.5-gauge give more easily under pressure, while a 12.5-gauge coil, the thickest typically available, feels quite firm.
Connections between the coils help the mattress retain its shape. Most coils are connected by interconnecting wires; encased coils are not connected, but the fabric encasement helps preserve the mattress shape.
There are four types of mattress coils:
- Bonnell coils are the oldest and most common. First adapted from carriage seat springs of the 19th century, they are still prevalent in mid-priced mattresses. Bonnell springs are a knotted, round-top, hourglass-shaped steel wire coil. When laced together with cross wire helicals, these coils form the simplest innerspring unit, also referred to as a Bonnell unit.
- Offset coils are an hourglass type coil on which portions of the top and bottom convolutions have been flattened. In assembling the innerspring unit, these flat segments of wire are hinged together with helical wires. The hinging effect of the unit is designed to conform to body shape. LFK coils are an unknotted offset coil with a cylindrical or columnar shape.
- Continuous coils is an innerspring configuration in which the rows of coils are formed from a single piece of wire. They work in a hinging effect similar to that of offset coils.
- Marshall coils, also known as wrapped or encased coils or pocket springs, are thin-gauge, barrel-shaped, knot-less coils individually encased in fabric pockets—normally a fabric from man-made, non-woven fiber. Some manufacturers pre-compress these coils, which makes the mattress firmer and allows for motion separation between the sides of the bed. As the springs are not wired together, they work more or less independently: the weight on one spring does not affect its neighbors. More than half the consumers who participated in a survey had chosen to buy pocket spring mattresses.
Upholstery layers
The insulator separates the mattress core from the middle upholstery. It is usually made of fiber or mesh and is intended to keep the middle upholstery in place.
The middle upholstery comprises all the material between the insulator and the quilt. It is usually made from materials which are intended to provide comfort to the sleeper, including flexible polyurethane foam, viscoelastic foam, latex foam, felt, polyester fiber, cotton fiber, wool fiber and non-woven fiber pads. In Europe and North America, mattress makers have begun incorporating gel-infused foams, soft-solid gels layered over foam, and poured gels in the top comfort layer of the bed.
The quilt is the top layer of the mattress. Made of light foam or fibers stitched to the underside of the ticking, it provides a soft surface texture to the mattress and can be found in varying degrees of firmness.
Foundation
There are three main types of foundation or bed base:- A traditional box spring consists of a rigid frame containing extra heavy duty springs. This foundation is often paired with an innerspring mattress, as it extends the life of the spring unit at the mattress's core.
- An all-wood foundation usually has seven or eight support slats disposed below paperboard or beaverboard. This foundation, variously called a "no-flex", "low-flex" or zero-deflection unit, as well as an "ortho box", provides support similar to a platform foundation. All-wood foundations have become increasingly prevalent as U.S. mattress makers shifted to super-thick, one-sided mattresses.
- A grid-top foundation bed base is a type of bed foundation that features a grid-like structure made of metal or wood slats. The slats are spaced apart to provide support for a mattress and improve airflow to keep the mattress cool and dry.
The grid-top design also allows for better weight distribution and can reduce pressure points, which can be beneficial for people with back pain or joint issues. Additionally, the open design of the foundation can make it easier to move and store compared to bulkier box springs.
Typically the measurements of a foundation will be about 1–2″ shorter than the measurement of a mattress.