Terran 1
Terran 1 was an expendable two-stage small-lift launch vehicle developed by Relativity Space. Development began in 2017 and the rocket was retired in 2023. Most structures and components of the vehicle are manufactured with 3D printing processes.
Terran 1's first and only launch took place March 23, 2023 from Cape Canaveral [Launch Complex 16|Cape Canaveral], but did not achieve orbit due to a failure of the second stage. Following the failed launch, Relativity retired the rocket in favor of developing the much larger, reusable Terran R vehicle.
Design
Terran 1 consisted of two stages. The first stage is powered by nine Aeon 1 engines burning methane and oxygen propellants in a gas-generator cycle, each producing of thrust. The second stage is powered by a single vacuum-optimized version of Aeon 1, known as AeonVac, producing of thrust in vacuum. Both stages are autogenously pressurized.The vehicle's payload fairing measures long and in diameter. Payload capacity was specified to be to lower inclination low-Earth orbits and to a Sun-synchronous orbit. In any case, the vehicle never carried payloads, its sole launch featured an inert nosecone in place of a functional clamshell fairing.
The primary and secondary structures of Terran 1 were manufactured with Relativity's Stargate 3D printer, which welded structures together from aluminum alloy. 90% of Terran 1 by mass consisted of printed components; Relativity claimed that they could reduce the part count in the vehicle by 100 times compared to traditionally-manufactured rockets and manufacture an entire flight article from raw materials in 60 days. Relativity's in-development Terran R launch vehicle will utilize the same tooling used to manufacture Terran 1.
Relativity advertised a price per launch for Terran 1 of US$10 million in 2019. The advertised price per launch had been increased to $12 million USD in 2021.
Proposed upgrades
In February 2022, Relativity CEO Tim Ellis stated in an interview with Ars Technica the nine Aeon 1 engines on the first stage could be replaced with a single Aeon R engine with substantially higher thrust. The Aeon R engine is planned to be used on Relativity's much larger Terran R rocket. The upgrade was planned to debut on the fourth flight of Terran 1 before the program was cancelled.Launch
Relativity received a Federal Aviation Administration launch license to conduct the first launch of Terran 1, not-earlier-than 8 March 2023 from Cape Canaveral Space Force Station's Launch Complex 16. Originally, another static fire was planned with the full rocket stack before first launch. Relativity believed it performed enough tests and instead attempted a launch. Terran 1's initial flight scheduled for 8 March 2023 was scrubbed due to "exceeding launch commit criteria limits for propellant thermal conditions on stage two". A second launch attempt on 11 March was also scrubbed. Set for 18:00 UTC, high upper-level winds prevented liftoff for over an hour. A second attempt at 19:35 UTC was cancelled at T−70 seconds from a boat in the launch safety range. A third attempt at 19:42 UTC was cancelled half a second before liftoff. The engines briefly lit up before shutting down from a "launch commit criteria violation". A final attempt occurred at 21:00 UTC. An issue with the automatic stage separation promptly closed the launch window.Another launch window for Terran 1's initial flight opened on March 23. After holding twice from a boat in the launch safety range, and high upper-level winds, the rocket lifted off at 03:25 UTC. Following a nominal liftoff and powered flight of the first stage, the second stage failed to ignite, leading to the loss of the mission. Preliminary investigations blamed the failure on a slower-than-expected valve opening as well as vapor ingestion into the liquid oxygen turbopump causing reduced performance. Although the launch did not orbit, Relativity acknowledged the successful performance of the vehicle's 3D printed structures under flight loads.
Following the loss of the first mission, the company abandoned further plans for Terran 1, instead choosing to focus efforts on developing the much larger reusable Terran R vehicle. Existing payloads on Terran 1 will likely have to be remanifested to Terran R or other flights.