Sangria 25
The Sangria 25 is a French sailboat that was designed by Philippe Harlé as a cruiser-racer and first built in 1969.
The design is one of the most successful sailboat models of its size built in Europe, with 2,336 boats completed.
Production
The design was built by Jeanneau and Gibert Marine in France from 1969 until 1982, but it is now out of production. A total of 2,150 standard models were built plus 186 of the GTE model.Design
The Sangria 25 is a recreational keelboat, built predominantly of single skin fiberglass polyester, with wooden trim. It has a masthead sloop rig, with a deck-stepped mast, one set of spreaders and aluminum spars with stainless steel wire rigging. The hull has a raked stem, a plumb transom, a skeg-mounted rudder controlled by a tiller and a fixed fin keel or deep draft keel in the GTE model. It displaces and carries of ballast.The standard model boat has a draft of, while the deep draft GTE model has a draft of.
The boat is fitted with a diesel inboard engine of for docking and maneuvering. The fuel tank holds and the fresh water tank has a capacity of.
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin. The galley is located on the starboard side just forward of the companionway ladder. The galley is equipped with a two-burner stove, ice box and a small sink. The head is located just aft of the bow cabin on the port side. The maximum cabin headroom is at the galley, the main cabin headroom is and the bow cabin headroom is.
For sailing downwind the boat may be equipped with a symmetrical spinnaker of.
The design has a hull speed of.