Rumpler D.I


The Rumpler D.I was a fighter-reconnaissance aircraft produced in Germany at the end of World War I. It was a conventional single-bay biplane with wings of unequal span braced by I-struts. It featured an open cockpit and a fixed, tailskid undercarriage. The upper wing was fitted with aerodynamically balanced ailerons and fuselage had an oval cross-section.

Design and development

The D.I had a protracted development through the course of 1917, with at least six development prototypes built before Rumpler settled on a final design in 1918 in time for the Idflieg's D-type competition at Adlershof. Two 8D1s participated, powered by Mercedes D.III engines. Another one participated in the follow-on competition in autumn, this time with a BMW engine.

Operational history

The Idflieg approved the type for production and issued the designation D.I, but only a small number were produced; the war was practically over and none saw operational service.

Variants

7D1 - initial prototype with comma-style balanced rudder, wide-chord I-struts, and upper wing supported by pylon faired into engine cowling. The entire fuselage was skinned in plywood. The radiator was mounted in the upper wing, set off the port side of the supporting pylon.7D2 - identical to 7D1 but with vertical stabiliser added7D4 - similar to 7D2 with conventional struts in place of I-struts, conventional cabane struts in place of central pylon, radiator moved to wing centreline, and central fuselage skinned in fabric.7D57D7 - similar to 7D4 but with wing bracing again using I-struts and the bracing wires simplified. The flush-mounted radiator in the wing was replaced by ear-style frontal radiators on the forward fuselage7D8 - very similar to 7D7, with wire bracing simplified further 8D1 - final version approved for production as '''D I'''

Operators