Peaucellier–Lipkin linkage
The Peaucellier-Lipkin linkage, invented in 1864, was the first true planar straight line mechanism – the first planar linkage capable of transforming rotary motion into perfect straight-line motion, and vice versa. It is named after Charles-Nicolas Peaucellier, a French army officer, and Yom Tov Lipman Lipkin, a Lithuanian Jew and son of the famed Rabbi Israel Salanter.
Until this invention, no planar method existed of converting exact straight-line motion to circular motion, without reference guideways. In 1864, all power came from steam engines, which had a piston moving in a straight-line up and down a cylinder. This piston needed to keep a good seal with the cylinder in order to retain the driving medium, and not lose energy efficiency due to leaks. The piston does this by remaining perpendicular to the axis of the cylinder, retaining its straight-line motion. Converting the straight-line motion of the piston into circular motion was of critical importance. Most, if not all, applications of these steam engines, were rotary.
The mathematics of the Peaucellier-Lipkin linkage is directly related to the inversion of a circle.
Earlier Sarrus linkage
There is an earlier straight-line mechanism, whose history is not well known, called the Sarrus linkage. This linkage predates the Peaucellier-Lipkin linkage by 11 years and consists of a series of hinged rectangular plates, two of which remain parallel but can be moved normally to each other. Sarrus' linkage is of a three-dimensional class sometimes known as a space crank, unlike the Peaucellier-Lipkin linkage which is a planar mechanism.Geometry
In the geometric diagram of the apparatus, six bars of fixed length can be seen:,,,,,. The length of is equal to the length of, and the lengths of,,, and are all equal forming a rhombus. Also, point is fixed. Then, if point is constrained to move along a circle which passes through, then point will necessarily have to move along a straight line. In contrast, if point were constrained to move along a line, then point would necessarily have to move along a circle.Many different over-all proportions of this linkage are possible. Since points,, must be collinear at all points in the linkage's motion, and countless arm length combinations are viable, then mirror symmetry across isn't necessary. With staying collinear, the only requirement to achieve the intended straight-line motion of are that, that, and for to be constrained to a circular path which crosses. Otherwise, there is no fixed relationship between the lengths of the sides of the figure, the radius of the constraining circular path of, and the lengths of or.
Mathematical proof of concept
Collinearity
First, it must be proven that points,, are collinear. This may be easily seen by observing that the linkage is mirror-symmetric about line, so point must fall on that line.More formally, triangles and are congruent because side is congruent to itself, side is congruent to side , and side is congruent to side . Therefore, angles and are equal.
Next, triangles and are congruent, since sides and are congruent, side is congruent to itself, and sides and are congruent. Therefore, angles and are equal.
Finally, because they form a complete circle, we have
but, due to the congruences, and, thus
therefore points,, and are collinear.
Inverse points
Let point be the intersection of lines and. Then, since is a rhombus, is the midpoint of both line segments and. Therefore, length = length.Triangle is congruent to triangle, because side is congruent to side, side is congruent to itself, and side is congruent to side . Therefore, angle = angle. But since, then,, and.
Let:
Then:
Since and are both fixed lengths, then the product of and is a constant:
and since points,, are collinear, then is the inverse of with respect to the circle with center and radius.