Phase Alternating Line is a colour encoding system for analogue television used in broadcast television systems in most countries broadcasting at 625-line / 50 field per second. It was one of three major analogue colour television standards, the others being NTSC and SECAM.
Almost all of the countries using PAL are currently in the process of conversion, or have already converted standards to DVB, ISDB or DTMB.
This page primarily discusses the PAL colour encoding system. The articles on broadcast television systems and analogue television further describe frame rates, image resolution and audio modulation.

Geographic reach

PAL was adopted by most European countries, by all African countries that had never been a Belgian or French colony, by Argentina, Brazil, Paraguay, and Uruguay, by most of Asia, and by Oceania.
There were some countries in those regions that did not adopt PAL. They were France, most ex-Soviet states, Japan, Myanmar, the Philippines, and Taiwan.


In the 1950s, the Western European countries began plans to introduce colour television, and were faced with the problem that the NTSC standard demonstrated several weaknesses, including colour tone shifting under poor transmission conditions, which became a major issue considering Europe's geographical and weather-related particularities. To overcome NTSC's shortcomings, alternative standards were devised, resulting in the development of the PAL and SECAM standards. The goal was to provide a colour TV standard for the European picture frequency of 50 fields per second, and finding a way to eliminate the problems with NTSC.
PAL was developed by Walter Bruch at Telefunken in Hanover, West Germany, with important input from Dr. Kruse and. The format was patented by Telefunken in 1962, citing Bruch as inventor, and unveiled to members of the European Broadcasting Union on 3 January 1963. When asked why the system was named "PAL" and not "Bruch" the inventor answered that a "Bruch system" would probably not have sold very well. The first broadcasts began in the United Kingdom in June 1967, followed by West Germany later that year. The one BBC channel initially using the broadcast standard was BBC2, which had been the first UK TV service to introduce "625-lines" in 1964. Telefunken PALcolour 708T was the first PAL commercial TV set. It was followed by Loewe-Farbfernseher S 920 & F 900.
Telefunken was later bought by the French electronics manufacturer Thomson. Thomson also bought the Compagnie Générale de Télévision where Henri de France developed SECAM, the first European Standard for colour television. Thomson, now called Technicolour SA, also owns the RCA brand and licences it to other companies; Radio Corporation of America, the originator of that brand, created the NTSC colour TV standard before Thomson became involved.
The term PAL was often used informally and somewhat imprecisely to refer to the 625-line/50 Hz television system in general, to differentiate from the 525-line/60 Hz system generally used with NTSC. Accordingly, DVDs were labelled as PAL or NTSC even though technically the discs carry neither PAL nor NTSC encoded signal. CCIR 625/50 and EIA 525/60 are the proper names for these standards; PAL and NTSC on the other hand are methods of encoding colour information in the signal.

Colour encoding

Both the PAL and the NTSC system use a quadrature amplitude modulated subcarrier carrying the chrominance information added to the luminance video signal to form a composite video baseband signal. The frequency of this subcarrier is 4.43361875 MHz for PAL 4.43, compared to 3.579545 MHz for NTSC 3.58. The SECAM system, on the other hand, uses a frequency modulation scheme on its two line alternate colour subcarriers 4.25000 and 4.40625 MHz.
The name "Phase Alternating Line" describes the way that the phase of part of the colour information on the video signal is reversed with each line, which automatically corrects phase errors in the transmission of the signal by cancelling them out, at the expense of vertical frame colour resolution. Lines where the colour phase is reversed compared to NTSC are often called PAL or phase-alternation lines, which justifies one of the expansions of the acronym, while the other lines are called NTSC lines. Early PAL receivers relied on the human eye to do that cancelling; however, this resulted in a comb-like effect known as Hanover bars on larger phase errors. Thus, most receivers now use a chrominance analogue delay line, which stores the received colour information on each line of display; an average of the colour information from the previous line and the current line is then used to drive the picture tube. The effect is that phase errors result in saturation changes, which are less objectionable than the equivalent hue changes of NTSC. A minor drawback is that the vertical colour resolution is poorer than the NTSC system's, but since the human eye also has a colour resolution that is much lower than its brightness resolution, this effect is not visible. In any case, NTSC, PAL, and SECAM all have chrominance bandwidth reduced greatly compared to the luminance signal.
The 4.43361875 MHz frequency of the colour carrier is a result of 283.75 colour clock cycles per line plus a 25 Hz offset to avoid interferences. Since the line frequency is 15625 Hz, the colour carrier frequency calculates as follows: 4.43361875 MHz = 283.75 × 15625 Hz + 25 Hz.
The frequency 50 Hz is the optional refresh frequency of the monitor to be able to create an illusion of motion, while 625 lines means the vertical lines or resolution that the PAL system supports.
The original colour carrier is required by the colour decoder to recreate the colour difference signals. Since the carrier is not transmitted with the video information it has to be generated locally in the receiver. In order that the phase of this locally generated signal can match the transmitted information, a 10 cycle burst of colour subcarrier is added to the video signal shortly after the line sync pulse, but before the picture information, during the so-called back porch. This colour burst is not actually in phase with the original colour subcarrier, but leads it by 45 degrees on the odd lines and lags it by 45 degrees on the even lines. This swinging burst enables the colour decoder circuitry to distinguish the phase of the R-Y vector which reverses every line.


PAL usually has 576 visible lines compared with 480 lines with NTSC, meaning that PAL has a 20% higher resolution, in fact it even has a higher resolution than Enhanced Definition standard. Most TV output for PAL and NTSC use interlaced frames meaning that even lines update on one field and odd lines update on the next field. Interlacing frames gives a smoother motion with half the frame rate. NTSC is used with a frame rate of 60i or 30p whereas PAL generally uses 50i or 25p; both use a high enough frame rate to give the illusion of fluid motion. This is due to the fact that NTSC is generally used in countries with a utility frequency of 60 Hz and PAL in countries with 50 Hz, although there are many exceptions. Both PAL and NTSC have a higher frame rate than film which uses 24 frames per second. PAL has a closer frame rate to that of film, so most films are sped up 4% to play on PAL systems, shortening the runtime of the film and, without adjustment, slightly raising the pitch of the audio track. Film conversions for NTSC instead use 3:2 pull down to spread the 24 frames of film across 60 interlaced fields. This maintains the runtime of the film and preserves the original audio, but may cause worse interlacing artefacts during fast motion.
NTSC receivers have a tint control to perform colour correction manually. If this is not adjusted correctly, the colours may be faulty. The PAL standard automatically cancels hue errors by phase reversal, so a tint control is unnecessary yet Saturation control can be more useful. Chrominance phase errors in the PAL system are cancelled out using a 1H delay line resulting in lower saturation, which is much less noticeable to the eye than NTSC hue errors.
However, the alternation of colour information—Hanover bars—can lead to picture grain on pictures with extreme phase errors even in PAL systems, if decoder circuits are misaligned or use the simplified decoders of early designs. In most cases such extreme phase shifts do not occur. This effect will usually be observed when the transmission path is poor, typically in built up areas or where the terrain is unfavourable. The effect is more noticeable on UHF than VHF signals as VHF signals tend to be more robust.
In the early 1970s some Japanese set manufacturers developed decoding systems to avoid paying royalties to Telefunken. The Telefunken licence covered any decoding method that relied on the alternating subcarrier phase to reduce phase errors. This included very basic PAL decoders that relied on the human eye to average out the odd/even line phase errors. One solution was to use a 1H analogue delay line to allow decoding of only the odd or even lines. For example, the chrominance on odd lines would be switched directly through to the decoder and also be stored in the delay line. Then, on even lines, the stored odd line would be decoded again. This method effectively converted PAL to NTSC. Such systems suffered hue errors and other problems inherent in NTSC and required the addition of a manual hue control.
PAL and NTSC have slightly divergent colour spaces, but the colour decoder differences here are ignored.


The SECAM patents predate those of PAL by several years. Its creator, Henri de France, in search of a response to known NTSC hue problems, came up with ideas that were to become fundamental to both European systems, namely:
1) colour information on two successive TV lines is very similar and vertical resolution can be halved without serious impact on perceived visual quality
2) more robust colour transmission can be achieved by spreading information on two TV lines instead of just one
3) information from the two TV lines can be recombined using a delay line.
SECAM applies those principles by transmitting alternately only one of the U and V components on each TV line, and getting the other from the delay line. QAM is not required, and frequency modulation of the subcarrier is used instead for additional robustness.
SECAM is free of both hue and saturation errors. It is not sensitive to phase shifts between the colour burst and the chrominance signal, and for this reason was sometimes used in early attempts at colour video recording, where tape speed fluctuations could get the other systems into trouble. In the receiver, it did not require a quartz crystal and generally could do with lower accuracy delay lines and components.
SECAM transmissions are more robust over longer distances than NTSC or PAL. However, owing to their FM nature, the colour signal remains present, although at reduced amplitude, even in monochrome portions of the image, thus being subject to stronger cross colour.
One serious drawback for studio work is that the addition of two SECAM signals does not yield valid colour information, due to its use of frequency modulation. It was necessary to demodulate the FM and handle it as AM for proper mixing, before finally remodulating as FM, at the cost of some added complexity and signal degradation. In its later years, this was no longer a problem, due to the wider use of component and digital equipment.
PAL can work without a delay line, but this configuration, sometimes referred to as "poor man's PAL", could not match SECAM in terms of picture quality. To compete with it at the same level, it had to make use of the main ideas outlined above, and as a consequence PAL had to pay licence fees to SECAM. Over the years, this contributed significantly to the estimated 500 million francs gathered by the SECAM patents.
Hence, PAL could be considered as a hybrid system, with its signal structure closer to NTSC, but its decoding borrowing much from SECAM.
There were initial specifications to use colour with the French 819 line format. However, "SECAM E" only ever existed in development phases. Actual deployment used the 625 line format. This made for easy interchange and conversion between PAL and SECAM in Europe. Conversion was often not even needed, as more and more receivers and VCRs became compliant with both standards, helped in this by the common decoding steps and components. When the SCART plug became standard, it could take RGB as an input, effectively bypassing all the colour coding formats' peculiarities.
When it comes to home VCRs, all video standards use what is called "colour under" format. Colour is extracted from the high frequencies of the video spectrum, and moved to the lower part of the spectrum available from tape. Luminance then uses what remains of it, above the colour frequency range. This is usually done by heterodyning for PAL. But the FM nature of colour in SECAM allows for a cheaper trick: division by 4 of the subcarrier frequency. This became the standard for SECAM VHS recording in France. Most other countries kept using the same heterodyning process as for PAL or NTSC and this is known as MESECAM recording.
Another difference in colour management is related to the proximity of successive tracks on the tape, which is a cause for chroma crosstalk in PAL. A cyclic sequence of 90° chroma phase shifts from one line to the next is used to overcome this problem. This is not needed in SECAM, as FM provides sufficient protection.
Regarding early videodiscs, the established Laserdisc standard supported only NTSC and PAL. However, a different optical disc format, the Thomson transmissive optical disc made a brief appearance on the market. At some point, it used a modified SECAM signal. The media's flexible and transmissive material allowed for direct access to both sides without flipping the disc, a concept that reappeared in multi-layered DVDs about fifteen years later.

PAL signal details

For PAL-B/G the signal has these characteristics.
Horizontal sync polarityNegative
Total time for each line
Front porch
Sync pulse length
Back porch
Active video

After 0.9 µs a colourburst of cycles is sent. Most rise/fall times are in range. Amplitude is 100% for white level, 30% for black, and 0% for sync.
The CVBS electrical amplitude is Vpp and impedance of 75 Ω.
onto an RF carrier.
The vertical timings are:
Vertical lines312.5
Vertical lines visible288
Vertical sync polarityNegative
Vertical frequency
Sync pulse length
Active video 18.4 ms

As PAL is interlaced, every two fields are summed to make a complete picture frame.
Luminance,, is derived from red, green, and blue signals:
and are used to transmit chrominance. Each has a typical bandwidth of 1.3 MHz.
Composite PAL signal timing where.
Subcarrier frequency is 4.43361875 MHz for PAL-B/D/G/H/I/N.

PAL broadcast systems


Many countries have turned off analogue transmissions, so the following does not apply anymore, except for using devices which output broadcast signals, such as video recorders.
The majority of countries using or having used PAL have television standards with 625 lines and 50 fields per second, differences concern the audio carrier frequency and channel bandwidths. The variants are:
Systems B and G are similar. System B specifies 7 MHz channel bandwidth, while System G specifies 8 MHz channel bandwidth. Australia used System B for VHF and UHF channels. Similarly, Systems D and K are similar except for the bands they use: System D is only used on VHF, while System K is only used on UHF. Although System I is used on both bands, it has only been used on UHF in the United Kingdom.

PAL-M (Brazil)

In Brazil, PAL is used in conjunction with the 525 line, 59.94 field/s system M, using the NTSC colour subcarrier frequency. Exact colour subcarrier frequency of PAL-M is 3.575611 MHz. Almost all other countries using system M use NTSC.
The PAL colour system can also be applied to an NTSC-like 525-line picture to form what is often known as "PAL-60". PAL-M however should not be confused with "PAL-60".

PAL-N (Argentina, Paraguay and Uruguay)

In Argentina, Paraguay and Uruguay the PAL-N variant is used. It employs the 625 line/50 field per second waveform of PAL-B/G, D/K, H, and I, but on a 6 MHz channel with a chrominance subcarrier frequency of 3.582056 MHz very similar to NTSC.
PAL-N uses the YDbDr colour space.
VHS tapes recorded from a PAL-N or a PAL-B/G, D/K, H, or I broadcast are indistinguishable because the downconverted subcarrier on the tape is the same. A VHS recorded off TV in Europe will play in colour on any PAL-N VCR and PAL-N TV in Argentina, Paraguay and Uruguay. Likewise, any tape recorded in Argentina, Paraguay or Uruguay off a PAL-N TV broadcast can be sent to anyone in European countries that use PAL and it will display in colour. This will also play back successfully in Russia and other SECAM countries, as the USSR mandated PAL compatibility in 1985—this has proved to be very convenient for video collectors.
People in Argentina, Paraguay and Uruguay usually own TV sets that also display NTSC-M, in addition to PAL-N. Direct TV also conveniently broadcasts in NTSC-M for North, Central, and South America. Most DVD players sold in Argentina, Paraguay and Uruguay also play PAL discs—however, this is usually output in the European variant, so people who own a TV set which only works in PAL-N will have to watch those PAL DVD imports in black and white as the colour subcarrier frequency in the TV set is the PAL-N variation, 3.582056 MHz.
In the case that a VHS or DVD player works in PAL and the TV set works in PAL-N, there are two options:
Some DVD players include an internal transcoder and the signal can be output in NTSC-M, with some video quality loss due to the system's conversion from a 625/50 PAL DVD to the NTSC-M 525/60 output format. A few DVD players sold in Argentina, Paraguay and Uruguay also allow a signal output of NTSC-M, PAL, or PAL-N. In that case, a PAL disc can be played back on a PAL-N TV because there are no field/line conversions, quality is generally excellent.
Extended features of the PAL specification, such as Teletext, are implemented quite differently in PAL-N. PAL-N supports a modified 608 closed captioning format that is designed to ease compatibility with NTSC originated content carried on line 18, and a modified teletext format that can occupy several lines.
Some special VHS video recorders are available which can allow viewers the flexibility of enjoying PAL-N recordings using a standard PAL colour TV, or even through multi-system TV sets. Video recorders like Panasonic NV-W1E, AG-W2, AG-W3, NV-J700AM, Aiwa HV-M110S, HV-M1U, Samsung SV-4000W and SV-7000W feature a digital TV system conversion circuitry.


The PAL L standard uses the same video system as PAL-B/G/H, but with 6 MHz video bandwidth rather than 5.5 MHz. This requires the audio subcarrier to be moved to 6.5 MHz. An 8 MHz channel spacing is used for PAL-L.

System A

The BBC tested their pre-war 405 line monochrome system with all three colour standards including PAL, before the decision was made to abandon 405 and transmit colour on 625/System I only.

PAL interoperability

The PAL colour system is usually used with a video format that has 625 lines per frame and a refresh rate of 50 interlaced fields per second, such systems being B, G, H, I, and N.
This ensures video interoperability. However, as some of these standards use different sound carriers, it may result in a video image without audio when viewing a signal broadcast over the air or cable. Some countries in Eastern Europe which formerly used SECAM with systems D and K have switched to PAL while leaving other aspects of their video system the same, resulting in the different sound carrier. Instead, other European countries have changed completely from SECAM-D/K to PAL-B/G.
The PAL-N system has a different sound carrier, and also a different colour subcarrier, and decoding on incompatible PAL systems results in a black-and-white image without sound.
The PAL-M system has a different sound carrier and a different colour subcarrier, and does not use 625 lines or 50 frames/second. This would result in no video or audio at all when viewing a European signal.

Multisystem PAL support and "PAL 60"

Recently manufactured PAL television receivers can typically decode all of these systems except, in some cases, PAL-M and PAL-N. Many of receivers can also receive Eastern European and Middle Eastern SECAM, though rarely French-broadcast SECAM unless they are manufactured for the French market. They will correctly display plain CVBS or S-video SECAM signals. Many can also accept baseband NTSC-M, such as from a VCR or game console, and RF modulated NTSC with a PAL standard audio subcarrier, though not usually broadcast NTSC. Many sets also support NTSC with a 4.43 MHz subcarrier.
Many 1990s-onwards videocassette recorders sold in Europe can play back NTSC tapes. When operating in this mode most of them do not output a true PAL signal, but rather a hybrid consisting of the original NTSC line standard, but with colour converted to PAL 4.43 MHz—this is known as "PAL 60" with "60" standing for 60 Hz, instead of 50 Hz. Some video game consoles also output a signal in this mode. Notably, the PlayStation 2 did not actually offer a true PAL 60 mode; while many PlayStation 2 games did offer a "PAL 60" mode as an option, the console would in fact generate an NTSC signal during 60 Hz operation. Most newer television sets can display such a signal correctly, but some will only do so in black and white and/or with flickering/foldover at the bottom of the picture, or picture rolling. Some TV tuner cards or video capture cards will support this mode. A "PAL 60" signal is similar to an NTSC signal, but with the usual PAL chrominance subcarrier at 4.43 MHz and with the PAL-specific phase alternation of the red colour difference signal between the lines.
Some DVD players offer a choice of PAL vs NTSC output for NTSC discs.

Countries and territories using PAL

Below countries and territories currently use or once used the PAL system. Many of these have converted or are currently converting PAL to DVB-T, DVB-T2, DTMB or ISDB.

PAL B, D, G, H, K or I

The following countries no longer use PAL for terrestrial broadcasts, and are in process of converting from PAL to DVB-T.
CountrySwitched toSwitchover completed
DVB-T22019-10-011 October 2019
DVB-T2007-09-2525 September 2007
DVB-T2013-12-1010 December 2013
DVB-T and DVB-T22011-06-077 June 2011
DVB-T2015-06-1717 June 2015
DVB-T2010-03-011 March 2010
DVB-T2015-01-011 January 2015
DVB-T2013-09-3030 September 2013
DVB-T22015-01-011 January 2015
DVB-T2010-10-2020 October 2010
DVB-T2011-07-011 July 2011
DVB-T2012-06-3030 June 2012
DVB-T and DVB-T22009-11-011 November 2009
DVB-T2010-07-011 July 2010
DVB-T2002–12 December 2002
DVB-T2007-09-011 September 2007
DVB-T2015-07-011 July 2015
DVB-T and DVB-T22009-06-044 June 2009
DVB-T22015-06June 2015
DVB-T2015-02-056 February 2015
DVB-T2012-12-3131 December 2012
DVB-T2010-11-1717 November 2010
DVB-T and DVB-T22013-10-3131 October 2013
DVB-T and DVB-T22015-02-022 February 2015
DVB-T2015-02-3131 March 2015
DVB-T2014-12-1919 December 2014
DVB-T2012-10-2424 October 2012
DVB-T2012-10-2424 October 2012
DVB-T and DVB-T22011-06-1313 June 2011
DVB-T2012-07-044 July 2012
DVB-T2010-11-1717 November 2010
DVB-T2015-03March 2015
DVB-T2010-06-011 June 2010
DVB-T2012-10-2929 October 2012
DVB-T2006-09-011 September 2006
DVB-T2013-05-3131 May 2013
DVB-T2011-10-3131 October 2011
DVB-T2011-05-2424 May 2011
DVB-T2015-06-1717 June 2015
DVB-T2014-09-1313 September 2014
DVB-T2006-12-1414 December 2006
DVB-T2013-12-011 December 2013
DVB-T2009-12December 2009
DVB-T2013-07-2323 July 2013
DVB-T2012-04-2626 April 2012
DVB-T and DVB-T22012-02-1313 February 2012
DVB-T22016-12-3131 December 2016
DVB-T2014-03March 2014
DVB-T2010-12-022 December 2010
DVB-T and DVB-T22012-02-1313 February 2012
DVB-T22015-06-077 June 2015
DVB-T22019-01-022 January 2019
DVB-T2012-12-3131 December 2012
DVB-T2010-12-011 December 2010
DVB-T and DVB-T22010-04-033 April 2010
DVB-T2007-10-2929 October 2007
DVB-T2007-11-2626 November 2007
DVB-T2014-07July 2014
DVB-T and DVB-T22012-02-1313 February 2012
DVB-T and DVB-T22016-12-3131 December 2016
DVB-T and DVB-T2 2012-10-2424 October 2012
DVB-T22014-12-3131 December 2014

Digital PAL/PAL 2.0

The PAL system is analog. There was an attempt to manufacture equipment that digitizes the PAL signal in the 1980s, but it was not commercially successful. Digital devices such as digital television, modern game consoles, computers, etc., use color component systems where the R, G, and B signals are transmitted over three different cables, or Y, RY, and BY. In these cases only the number of total horizontal lines is taken into account—625 in digital PAL and 525 in NTSC—and the frame rate—25 frames/s in PAL Digital and 30 frames/s in digital NTSC. Systems using the MPEG-2 standard, such as DVD and satellite television, cable television, or digital terrestrial television have practically nothing to do with PAL.