LEOPARD


LEOPARD is a nanosatellite developed by Kyushu Institute of Technology and Nanyang Technological University, which will demonstrate multiple technologies including multispectral cameras to monitor horizon glow, and on board processing of one-way radio signals. Students from 17 countries developed the satellite. The satellite's size is 10cm×10cm×30cm, or a 3U size CubeSat. LEOPARD was launched on 26 October 2025 on a H3 Launch Vehicle, and was carried to the International Space Station on board HTV-X1. LEOPARD will be deployed from the ISS's Kibō module.

Mission

Following its deployment from the ISS, LEOPARD will conduct several technology demonstration missions. The satellite will deploy solar panels using shape-memory alloy and a heating system. SMAs were selected for use instead of traditional springs to create a thin deployment mechanism.
Nanyang Technological University in Singapore developed LEOPARD's Single-Event Latch-up mission payload, which will monitor ionizing space radiation. Space radiation can interact with electronics on board spacecraft and cause them to malfunction, a phenomenon known as single-event effects. LEOPARD's SEL mission payload consists of two microcontrollers with identical functions: one using radiation-hardened microchips, and one using commercial off-the-shelf components.

MSC

LEOPARD's Multispectral camera mission, or MSC, will photograph Earth's atmosphere when the Sun is below the horizon, to observe Rayleigh scattering and aerosol scattering. The MSC payload has an RGB camera and a near-infrared camera. LEOPARD will use its attitude control system to point the cameras while conducting an observation.

OPERA

OPERA is a technology demonstration mission that will determine the satellite's orbit without using a global navigation satellite system such as GPS. Multiple Earth-based parabolic antennas, each a few meters in size and synchronized with one another, will send signals to the satellite in the S band. The signals will be sent in a predetermined time epoch. The satellite will then track the time of arrival of the signals, along with the Doppler shift of the signals it receives. From the difference in the relative time delay in receiving the signals, OPERA will estimate its own position in orbit. OPERA is expected to position the satellite with an accuracy of a few kilometers. The OPERA device occupies 0.5U of volume in the satellite.