InflateSail
InflateSail was a 3U CubeSat launched on PSLV C38 on 23 June 2017 into a polar Sun-synchronous orbit. It carried a inflatable rigidizable mast, and a drag-deorbiting sail. Its primary aim was to demonstrate the effectiveness of drag-based deorbiting from low Earth orbit. Built by Surrey Space Centre of the University of Surrey, it was one of the Technology Demonstrator CubeSats for the QB50 mission. An identical drag sail payload was planned to be included on the RemoveDEBRIS demonstrator.
Inflatable mast
The inflatable mast was deployed first to distance the sail from the main body of the satellite. The inflatable skin was a 3-ply, metal-polymer laminate which used the same strain rigidization process as the Echo 2 balloon. The inflation gas was stored in two cool gas generators. The inflation gas was vented almost immediately after the deployment and rigidization process. Fully folded, the inflatable was just over in height.Sail structure
The sail was made up of four quadrants of polyethylene naphthalate, supported by four bistable carbon fiber tape-springs. The structure was similar in format to both NanoSail-D2 and LightSail 2. The deployment of the sail was driven by a brushless DC motor.Spacecraft
InflateSail included an avionics suite to support the deployable sail payload. The spacecraft was powered by a GOMSpace power system and returned attitude data from the Stellenbosch/Surrey Attitude Determination and Control System.Communications with ground were executed through the TRXVU Transceiver procured from ISIS, using the UHF band to transmit and the VHF to receive.
Beacon data containing spacecraft parameters were transmitted at 60s intervals at 436.060MHz 1200bd BPSK.