Glasses
Glasses, also known as eyeglasses, spectacles, or colloquially as specs, are vision eyewear with clear or tinted lenses mounted in a frame that holds them in front of a person's eyes, typically utilizing a bridge over the nose and hinged arms, known as temples or temple pieces, that rest over the ears for support.
Glasses are typically used for vision correction, such as with reading glasses and glasses used for nearsightedness; however, without the specialized lenses, they are also at times used for cosmetic purposes.
Safety glasses are eye protection, a form of personal protective equipment that are worn by workers around their eyes for protection. Safety glasses act as a shield to protect the eyes from any type of foreign debris that may cause irritation or injury; these glasses may have protection on the sides of the eyes as well as in the lenses. Some types of safety glasses are used to protect against visible and near-visible light or radiation. Glasses are worn for eye protection in some sports, such as squash.
Glasses wearers may use a strap to prevent the glasses from falling off. Wearers of glasses that are used only part of the time may have the glasses attached to a cord that goes around their neck to prevent the loss and breaking of the glasses.
Sunglasses allow for better vision in bright daylight and are used to protect one's eyes against damage from excessive levels of ultraviolet light. Typical sunglasses lenses are tinted for protection against bright light or polarized to remove glare; photochromic glasses are clear or lightly tinted in dark or indoor conditions, but turn into sunglasses when they come into contact with ultraviolet light. Most over-the-counter sunglasses do not have corrective power in the lenses; however, special prescription sunglasses can be made. People with conditions that have photophobia as a primary symptom often wear sunglasses or precision tinted glasses, even indoors and at night.
Specialized glasses may be used for viewing specific visual information, for example, 3D glasses for 3D films. Sometimes glasses are worn purely for fashion or aesthetic purposes. Even with glasses used for vision correction, a wide range of fashions are available, using plastic, metal, wire, and other materials for frames. Most glasses lenses are made of plastic, polyethylene, and glass.
Types
Glasses can be marked or found by their primary function, but also appear in combinations such as prescription sunglasses or safety glasses with enhanced magnification.Corrective
Corrective lenses are used to correct refractive errors by bending the light entering the eye in order to alleviate the effects of conditions such as nearsightedness, farsightedness or astigmatism. The ability of one's eyes to accommodate their focus to near and distant focus alters over time. A common condition in people over forty years old is presbyopia, which is caused by the eye's crystalline lens losing elasticity, progressively reducing the ability of the lens to accommodate. Few people have a pair of eyes that show exactly equal refractive characteristics; one eye may need a "stronger" lens than the other.Corrective lenses bring the image back into focus on the retina. They are made to conform to the prescription of an ophthalmologist or optometrist. A lensmeter can be used to verify the specifications of an existing pair of glasses. Corrective eyeglasses can significantly improve the life quality of the wearer. Not only do they enhance the wearer's visual experience, but can also reduce problems that result from eye strain, such as headaches or squinting.
The most common type of corrective lens is "single vision", which has a uniform refractive index. For people with presbyopia and hyperopia, bifocal and trifocal glasses provide two or three different refractive indices, respectively, and progressive lenses have a continuous gradient. For children, near-sighted control lenses involve use of special lenses that assist to slow down the progression of myopia from growing further. Lenses can also be manufactured with high refractive indices, which allow them to be more lightweight, flatter and thinner than their counterparts with "low" refractive indices. High-Refractive Index lenses are aesthetically more appealing too.
Reading glasses provide a separate set of glasses for focusing on close by objects. They are available without prescription from drugstores, and offer a cheap, practical solution, though these have a pair of simple lenses of equal power, and so will not correct refraction problems like astigmatism or refractive or prismatic variations between the left and right eye. For the total correction of the individual's sight, glasses complying to a recent ophthalmic prescription are required.
People who need glasses to see often have corrective lens restrictions on their driver's licenses that require them to wear their glasses every time they drive or risk fines or jail time.
Some militaries issue prescription glasses to servicemen and women. These are typically GI glasses. Many state prisons in the United States issue glasses to inmates, often in the form of clear plastic aviators.
Adjustable-focus eyeglasses might be used to replace bifocals or trifocals, or might be used to produce cheaper single-vision glasses.
Pinhole glasses are a type of corrective glasses that do not use a lens. Pinhole glasses do not actually refract the light or change focal length. Instead, they create a diffraction limited system, which has an increased depth of field, similar to using a small aperture in photography. This form of correction has many limitations that prevent it from gaining popularity in everyday use. Pinhole glasses can be made in a DIY fashion by making small holes in a piece of card which is then held in front of the eyes with a strap or cardboard arms.
Glasses may also house other corrective or assistive devices. After the development of the transistor in the 1940s, combined eyeglass-hearing aids became popular. With thick-rimmed glasses the fashion at the time, a hearing aid could be concealed in the temple part of the frame. These fell out of fashion after the 1970s, but there are still occasions when combined eyeglass-hearing aids may be useful.
Safety
Safety glasses are worn to protect the eyes in various situations. They are made with break-proof plastic lenses to protect the eye from flying debris or other matter. Construction workers, factory workers, machinists and lab technicians are often required to wear safety glasses to shield the eyes from flying debris or hazardous splatters such as blood or chemicals. As of 2017, dentists and surgeons in Canada and other countries are required to wear safety glasses to protect against infection from patients' blood or other body fluids. There are also safety glasses for welding, which are styled like wraparound sunglasses, but with much darker lenses, for use in welding where a full-sized welding helmet is inconvenient or uncomfortable. These are often called "flash goggles" because they provide protection from welding flash. Nylon frames are usually used for protective eyewear for sports because of their lightweight and flexible properties. Unlike most regular glasses, safety glasses often include protection beside the eyes as well as in front of the eyes.Sunglasses
Sunglasses provide more comfort and protection against bright light and often against ultraviolet light. To properly protect the eyes from the dangers of UV light, sunglasses should have UV-400 blocker to provide good coverage against the entire light spectrum that poses a danger.Light polarization is an added feature that can be applied to sunglass lenses. Polarization filters are positioned to remove horizontally polarized rays of light, which eliminates glare from horizontal surfaces. Polarized sunglasses may present some difficulties for pilots since reflections from water and other structures often used to gauge altitude may be removed. Liquid-crystal displays emit polarized light, making them sometimes difficult to view with polarized sunglasses. Sunglasses may be worn for aesthetic purposes, or simply to hide the eyes. Examples of sunglasses that were popular for these reasons include tea shades and mirrored lenses. Many blind people wear nearly opaque glasses to hide their eyes for cosmetic reasons. Many people with light sensitivity conditions wear sunglasses or other tinted glasses to make the light more tolerable.
Sunglasses may also have corrective lenses, which requires a prescription. Clip-on sunglasses or sunglass clips can be attached to another pair of glasses. Some wrap-around sunglasses are large enough to be worn over another pair of glasses. Otherwise, many people opt to wear contact lenses to correct their vision so that standard sunglasses can be used.
Mixed double-frame (Flip glasses)
The double frame uplifting glasses have one moving frame with one pair of lenses and the basic fixed frame with another pair of lenses, that are connected by four-bar linkage. For example, sun lenses could be easily lifted up and down while mixed with myopia lenses that always stay on. Presbyopia lenses could be also combined and easily removed from the field of view if needed without taking off glasses. These glasses are often used for drivers going through tunnels, with the upper frame serving as sunglasses and the second frame as transparent lenses.3D glasses
The illusion of three dimensions on a two-dimensional surface can be created by providing each eye with different visual information. 3D glasses create the illusion of three dimensions by filtering a signal containing information for both eyes. The signal, often light reflected off a movie screen or emitted from an electronic display, is filtered so that each eye receives a slightly different image. The filters only work for the type of signal they were designed for.Anaglyph 3D glasses have a different colored filter for each eye, typically red and blue or red and green. A polarized 3D system on the other hand uses polarized filters. Polarized 3D glasses allow for color 3D, while the red-blue lenses produce an image with distorted coloration. An active shutter 3D system uses electronic shutters. Head-mounted displays can filter the signal electronically and then transmit light directly into the viewer's eyes.
Anaglyph and polarized glasses are distributed to audiences at 3D movies. Polarized and active shutter glasses are used with many home theaters. Head-mounted displays are used by a single person, but the input signal can be shared between multiple units.