Geosynchronous orbit
A geosynchronous orbit is an Earth-centered orbit with an orbital period that matches Earth's rotation on its axis, 23 hours, 56 minutes, and 4 seconds. The synchronization of rotation and orbital period means that, for an observer on Earth's surface, an object in geosynchronous orbit returns to exactly the same position in the sky after a period of one sidereal day. Over the course of a day, the object's position in the sky may remain still or trace out a path, typically in a figure-8 form, whose precise characteristics depend on the orbit's inclination and eccentricity. A circular geosynchronous orbit has a constant altitude of.
A special case of geosynchronous orbit is the geostationary orbit, which is a circular geosynchronous orbit in Earth's equatorial plane with both inclination and eccentricity equal to 0. A satellite in a geostationary orbit remains in the same position in the sky to observers on the surface.
Communications satellites are often given geostationary or close-to-geostationary orbits, so that the satellite antennas that communicate with them do not have to move but can be pointed permanently at the fixed location in the sky where the satellite appears.
History
In 1929, Herman Potočnik described both geosynchronous orbits in general and the special case of the geostationary Earth orbit in particular as useful orbits for space stations. The first appearance of a geosynchronous orbit in popular literature was in October 1942, in the first Venus Equilateral story by George O. Smith, but Smith did not go into details. British science fiction author Arthur C. Clarke popularised and expanded the concept in a 1945 paper entitled Extra-Terrestrial Relays – Can Rocket Stations Give Worldwide Radio Coverage?, published in Wireless World magazine. Clarke acknowledged the connection in his introduction to The Complete Venus Equilateral. The orbit, which Clarke first described as useful for broadcast and relay communications satellites, is sometimes called the Clarke Orbit. Similarly, the collection of artificial satellites in this orbit is known as the Clarke Belt.In technical terminology, the geosynchronous orbits are often referred to as geostationary if they are roughly over the equator, but the terms are used somewhat interchangeably. Specifically, geosynchronous Earth orbit may be a synonym for geosynchronous equatorial orbit, or geostationary Earth orbit.
The first geosynchronous satellite was designed by Harold Rosen while he was working at Hughes Aircraft in 1959. Inspired by Sputnik 1, he wanted to use a geostationary satellite to globalise communications. Telecommunications between the US and Europe was then possible between just 136 people at a time, and reliant on high frequency radios and an undersea cable.
Conventional wisdom at the time was that it would require too much rocket power to place a satellite in a geosynchronous orbit and it would not survive long enough to justify the expense, so early efforts were put towards constellations of satellites in low or medium Earth orbit. The first of these were the passive Echo balloon satellites in 1960, followed by Telstar 1 in 1962. Although these projects had difficulties with signal strength and tracking that could be solved through geosynchronous satellites, the concept was seen as impractical, so Hughes often withheld funds and support.
By 1961, Rosen and his team produced a cylindrical prototype with a diameter of, height of, weighing ; it was light, small enough to place in orbit by then-available rocketry, was spin stabilised and used dipole antennas producing a pancake-shaped waveform. In August 1961, they were contracted to begin building the working satellite. They lost Syncom 1 to electronics failure, but Syncom 2 was successfully placed into a geosynchronous orbit in 1963. Although its inclined orbit still required moving antennas, it was able to relay TV transmissions, and allowed for US President John F. Kennedy to phone Nigerian prime minister Abubakar Tafawa Balewa from a ship on August 23, 1963.
Today, hundreds of geosynchronous satellites provide remote sensing, navigation and communications.
Though most populated land locations on the planet now have terrestrial communications facilities, which often have latency and bandwidth advantages, and telephone access covering 96% of the population and internet access 90% as of 2018, some rural and remote areas in developed countries still rely on satellite communications.
Types
Geostationary orbit
A geostationary orbit is a circular geosynchronous orbit in the plane of the Earth's equator with a radius of approximately . A satellite in such an orbit is at an altitude of approximately above mean sea level. It maintains the same position relative to the Earth's surface. If one could see a satellite in geostationary orbit, it would appear to hover at the same point in the sky, i.e., not exhibit diurnal motion, while the Sun, Moon, and stars would traverse the skies behind it. Such orbits are useful for telecommunications satellites.A perfectly stable geostationary orbit is an ideal that can only be approximated. In practice the satellite drifts out of this orbit because of perturbations such as the solar wind, radiation pressure, variations in the Earth's gravitational field, and the gravitational effect of the Moon and Sun, and thrusters are used to maintain the orbit in a process known as station-keeping.
Eventually, without the use of thrusters, the orbit becomes inclined, oscillating between 0° and 15° every 55 years. At the end of the satellite's lifetime, when fuel approaches depletion, satellite operators may decide to omit these expensive manoeuvres to correct inclination and only control eccentricity. This prolongs the life-time of the satellite as it consumes less fuel over time, but the satellite can then only be used by ground antennas capable of following the N-S movement.
Geostationary satellites also tend to drift around one of two stable longitudes of 75° and 255° without station keeping.
Elliptical and inclined geosynchronous orbits
Many objects in geosynchronous orbits have eccentric or inclined orbits. Eccentricity makes the orbit elliptical and appear to oscillate east–west in the sky from the viewpoint of a ground station, while inclination tilts the orbit compared to the equator and makes it appear to oscillate north–south from a ground station. These effects combine to form an analemma.Satellites in elliptical or eccentric orbits must be tracked by steerable ground stations.
Tundra orbit
The Tundra orbit is an eccentric geosynchronous orbit that allows the satellite to spend most of its time dwelling over one high-latitude location. It sits at an inclination of 63.4°, which is a frozen orbit, which reduces the need for stationkeeping. At least two satellites are needed to provide continuous coverage over an area. It was used by Sirius XM Satellite Radio to improve signal strength in the northern US and Canada.Quasi-zenith orbit
The Quasi-Zenith Satellite System is a four-satellite system that operates in a geosynchronous orbit at an inclination of 42° and a 0.075 eccentricity. Each satellite dwells over Japan, allowing signals to reach receivers in urban canyons, then passes quickly over Australia.Launch
Geosynchronous satellites are launched to the east into a prograde orbit that matches the rotation rate of the equator. The smallest inclination that a satellite can be launched into is that of the launch site's latitude, so launching the satellite from close to the equator limits the amount of inclination change needed later. Additionally, launching from close to the equator allows the speed of the Earth's rotation to give the satellite a boost. A launch site should have water or deserts to the east, so any failed rockets do not fall on a populated area.Most launch vehicles place geosynchronous satellites directly into a geosynchronous transfer orbit, an elliptical orbit with an apogee at GSO height and a low perigee. On-board satellite propulsion is then used to raise the perigee, circularise and reach GSO.
Once in a viable geostationary orbit, spacecraft can change longitudinal position by adjusting their semi-major axis such that the new period is shorter or longer than a sidereal day to effect an apparent "drift" eastward or westward, respectively. Once at the desired longitude, the spacecraft's period is restored to geosynchronous.
Proposed orbits
Statite proposal
A statite is a hypothetical satellite that uses radiation pressure from the Sun against a solar sail to modify its orbit.It would hold its location over the dark side of the Earth at a latitude of approximately 30 degrees. It would return to the same spot in the sky every 24 hours from an Earth-based viewer's perspective and so be functionally similar to a geosynchronous orbit.
Space elevator
A further form of geosynchronous orbit is the theoretical space elevator. If a mass orbiting above the geostationary belt is tethered to the earth’s surface, and the mass is accelerated to maintain an orbital period equal to one sidereal day—then since the orbit now requires more downward force than gravity alone supplies, the tether is tensioned by the extra centripetal force required, and this tension keeps the tether structure stable as a crawler carries objects up and down along it.Retired satellites
Geosynchronous satellites require some station-keeping to remain in position, and once they run out of thruster fuel and are no longer useful they are moved into a higher graveyard orbit. It is not feasible to deorbit geosynchronous satellites, for to do so would take far more fuel than would be used by slightly elevating the orbit; and atmospheric drag is negligible, giving GSOs lifetimes of thousands of years.The retirement process is becoming increasingly regulated and satellites must have a 90% chance of moving over 200 km above the geostationary belt at end of life.