Flexure

Image:Mint box polypropylene lid.JPG|thumb|upright|A living hinge, on the lid of a Tic Tac box. This hinge has one compliant degree of freedom.
A flexure is a flexible element engineered to be compliant in specific degrees of freedom. Flexures are a design feature used by design engineers for providing adjustment or compliance in a design.

Flexure types

Most compound flexure designs are composed of three fundamental types of flexure:

Pin flexure - a thin bar or cylinder of material, constrains three degrees of freedom when geometry matches a notch cutout
Blade flexure - thin sheet of material, constrains three degrees of freedom
Notch flexure - thin cutout on both sides of a thick piece of material, constrains five degrees of freedom

Since single flexure features are limited both in travel capability and degrees of freedom available, compound flexure systems are designed using combinations of these component features. Using compound flexures, complex motion profiles with specific degrees of freedom and relatively long travel distances are possible.

Design aspects

In the field of precision engineering, flexures have several key advantages. High precision alignment tasks might not be possible when friction or stiction are present. Additionally, conventional bearings or linear bearings often exhibit positioning hysteresis due to backlash and friction. Flexures are able to achieve much lower resolution limits, because they depend on bending and/or torsion of flexible elements, rather than surface interaction of many parts. This makes flexures a critical design feature used in optical instrumentation such as interferometers.
Due to their mode of action, flexures are used for limited range motions and cannot replace long-travel or continuous-rotation adjustments. Additionally, special care must be taken to design the flexure to avoid material yielding or fatigue, both of which are potential failure modes in a flexure design.
Image:leafs1.jpg|thumb|A leaf spring suspension is an example of a flexure design in automotive engineering.

Design examples

Living hinge: Flexure which acts as a hinge. Preferred for their simplicity, as they can be included as a feature in a single piece of material.
Leaf spring: Leaf Springs are commonly used in vehicle suspensions. Leaf springs are an example of a flexure system with one compliant degree of freedom.
Flex Pivot: Frictionless pivoting component, for use in precision alignment applications.
NASA's Mars Exploration Rovers and the Mars Science Laboratory rover Curiosity have engineered flexures in their wheels which act as vibration isolation and suspension for the rovers.