Ferrari 360
The Ferrari 360 is a two-seater sports car which was manufactured by Ferrari from 1999 until 2004. It has a rear mid-engine, rear-wheel-drive layout with coupé and roadster body styles. The 360 has a V8 engine which is mounted longitudinally. It succeeded the Ferrari F355 and was replaced by the Ferrari F430 in 2004.
Development history
Ferrari partnered with Alcoa to produce an entirely new all-aluminum space-frame chassis that was 40% stiffer than its predecessors which had utilized steel. The design was 28% lighter despite a 10% increase in overall dimensions. Along with a lightweight frame the new Pininfarina body styling deviated from traditions of the previous decade's sharp angles and flip-up headlights. The V8 engine has a 3.6-litre capacity, a flat-plane crankshaft, and titanium connecting rods. The engine generates a power output of. According to Ferrari, weight was reduced by and the 0 to acceleration time improved from 4.7 to 4.5 seconds.The first model to be produced was the 360 Modena, followed later by the 360 Spider and a special edition, the Challenge Stradale. The Challenge Stradale was the high-performance road-legal version of the 360 produced by the factory, featuring carbon ceramic brakes, track-tuned suspension, aerodynamic gains, weight reduction, power improvements and revised gearbox software among its track-focused brief. There were 8,800 Modenas, 7,565 Spiders and 1,288 Challenge Stradale produced worldwide. There were 4,199 built for the US market—1,810 Modenas and 2,389 Spiders. Of those numbers, there were only 469 Modenas and 670 Spiders that were produced with a gated 6-speed manual transmission as opposed to the "F1" single-clutch automated manual transmission.
In addition to this were the low-volume factory race cars and a one-off Barchetta variant. The race cars were all derived from the 360 Modena and for the first time produced as a separate model in their own right. While the Barchetta was based on the Spider variant. The first race car was the 360 Modena Challenge, used in a one-make series; the factory-built racing cars were prepared by the official tuner,, who also developed the 360 N-GT. The N-GT was a 360 Challenge car evolved even further to compete in the FIA N-GT racing class alongside other marques such as Porsche.
Design
The 360 Modena represented a stylistic break with the angular, retractable‑headlamp aesthetic of Ferrari’s previous mid‑engined V‑8 berlinettas. In 1995–97, Ferrari instructed its long‑time collaborator Pininfarina to develop a “clean‑sheet” shape to suit an all‑new aluminium space‑frame chassis and to mark the dawn of a new millennium. Under the direction of Lorenzo Ramaciotti, head of Pininfarina’s design studio, the team produced a curvaceous, aerodynamically efficient body with a long wheelbase and wide tracks. The resulting design is devoid of a traditional “egg‑crate” grille; instead two separate intakes at each corner feed radiators positioned low in the nose and allow the centre section to channel airflow under the flat underbody. Twin rear diffusers generate ground effect and obviate the need for a rear spoiler.Concept and Styling Process
Ferrari’s brief called for a body that integrated seamlessly with the new aluminium chassis and improved downforce without adding drag. Ramaciotti’s team at Pininfarina began by exploring a number of full‑size clay models during 1996–97; the chosen proposal combined a sweeping beltline with large side intakes and transparent headlamp covers. Giuseppe Randazzo, head of Pininfarina’s styling technical office, recalled that the 360 was the first Ferrari to be fully developed using computer‑aided surfacing; his department used Alias digital tools to refine the surfaces before milling the clays and then returned to CAD for final adjustments. The exterior was signed off in late 1997 and the design was frozen for production the following year.
The principal exterior theme was the work of Pininfarina’s design director Lorenzo Ramaciotti, who had been responsible for the Ferrari 456 GT and 550 Maranello; he later filed a US design patent for the 360’s external form. The patent lists Ramaciotti as the sole inventor and depicts the production 360 Modena from multiple views. The patent drawings show a smooth nose with flush‑mounted headlamp covers, an unbroken side profile with recessed door handles, prominent rear‑fender air intakes and a crisp tail with twin round tail lamps.
Styling Features
The 360’s nose is characterised by two wide radiator openings flanking a raised central section; the shape allows air to pass underneath the car to a flat floor, ending in a pair of diffusers that increase downforce at speed. The transparent headlamp covers were a production first for a Ferrari V‑8 berlinetta and eliminated the drag and weight penalties of pop‑up units. In profile, the car’s cab‑forward stance emphasises the mid‑mounted V‑8 engine; a curved glass engine cover displays the intake plenums and red crackle‑finish cam covers. Large, elliptical scoops carved into the rear wings feed the side radiators and recall the buttresses of the 250 LM and Dino 206 GT, while the tail remains faithful to Ferrari tradition with twin circular tail lamps on each side.
Although many designers contributed during the development phase, Ferrari and Pininfarina only officially credit the completed design to Pininfarina under Lorenzo Ramaciotti’s direction. No other individual stylist is listed in Ferrari’s press material or in the patent. The interior, meanwhile, was developed jointly by Pininfarina and Ferrari’s Centro Stile and features a driver‑centric dashboard with exposed aluminium, leather trim and body‑coloured panels.
Design Patent
Road models
Modena
The first model of the 360 to be produced was the Modena, named after the town of Modena, the birthplace of Enzo Ferrari. Transmission options were a 6-speed manual transmission, or the electrohydraulic-actuated "F1" automated manual transmission with a gearbox built by Graziano Trasmissioni.The 360 Modena went into production in 1999 and remained in production until 2005 when it was replaced by the F430. The Modena was followed two years later by the 360 Spider, Ferrari's 20th road-going convertible which at launch overtook sales of the Modena. Other than weight, the Spider's specifications matched those of the Modena almost exactly.
Spider
The Ferrari 360 Spider was unveiled at the 2000 Geneva Motor Show.The 360 was designed with a convertible variant in mind; since removing the roof of a coupe reduces the torsional rigidity, the 360 was built for strength in other areas. Ferrari designers strengthened the sills, stiffened the front of the floorpan and redesigned the windscreen frame. The rear bulkhead had to be stiffened to cut out engine noise from the cabin. The convertible's necessary dynamic rigidity is provided by additional side reinforcements and a cross brace in front of the engine. Passenger safety is ensured by a strengthened windscreen frame and roll bars.
The 360 Spider displays a curvilinear waistline. The fairings imply the start of a roof, and stable roll bars are embedded in these elevations. Due to use of light aluminium construction throughout, the Spider weighs in only heavier than the coupé.
As with the Modena version, its V8 generating a power output of is on display under a glass engine cover. The engine — confined in space by the convertible's top's storage area — acquires additional air supply through especially large side air intakes. The intake manifolds were moved towards the centre of the engine between the air supply conduits in the Spider's engine compartment, as opposed to lying apart as with the Modena. In terms of performance, the 0- acceleration time was slightly slower due to the slight weight increase, and the top speed was reduced.
Despite the car's mid-mounted V8 engine, the electrically operated top is able to stow into the compartment when not in use. The convertible top was available in black, blue, grey and beige colours.
Dimensions
- Overall: length
- Overall: width
- Height:
- Wheelbase:
- Front track:
- Rear track:
- Weight:
- Curb weight:
- Weight distribution: 42/58% front/rear
- Fuel capacity:
Specifications (Modena and Spider)
Engine
- Type: 90° V8 F1310-00
- Bore & stroke:
- Total displacement:
- Redline: 8,500 rpm
- Maximum power: at 8,500 rpm
- Maximum torque: at 4,750 rpm
Performance
- Top speed: Redline limited - / Manufacturer claim -
- Lift-to-drag ratio: -0.73:1
- Acceleration:
- * 0-: 2.47 seconds
- * 0-: 4.6 seconds
- * 0-: 4.98 seconds
- * 0-: 6.79 seconds
- * 0-: 11.1 seconds / 11.7 seconds
- * 0-: 21.9 seconds
- * Standing Dragstrip|: 13.1-13.2 seconds at
- * Standing kilometer: 23.74 seconds
- Braking: -0 mph:
- Lateral acceleration: 0.90 g
- Speed through slalom:
- EPA fuel economy:
- * City:
- * High way:
- * Combined:
- Est. range:
- * City:
- * High way:
Barchetta