Parts cleaning


Parts cleaning is essential in many industrial processes, as a prelude to surface finishing or to protect sensitive components. Electroplating is particularly sensitive to part cleanliness, since molecular layers of oil can prevent the coating adhesion.
Cleaning processes include solvent cleaning, hot alkaline detergent cleaning, electro-cleaning, and acid etch. The most common industrial tests for cleanliness of machinery is the water-break test, in which the surface is thoroughly rinsed and vertically held. A quantitative measurement for this parameter is the contact angle. Hydrophobic contaminants such as oils cause the water to bead and break up, allowing the water to drain rapidly. Perfectly clean metal surfaces are hydrophilic and will keep an unbroken sheet of water that does not bead up or drain off.

Definitions and classifications

For the activities described here, the following terms are often found: metal cleaning, metal surface cleaning, component cleaning, degreasing, parts washing, and parts cleaning. These are well established in technical language usage, but they have their shortcomings. Metal cleaning can easily be mixed up with the refinement of un-purified metals. Metal surface cleaning and metal cleaning do not consider the increasing usage of plastics and composite materials in this sector. The term component cleaning leaves out the cleaning of steel sections and sheets, and finally, degreasing only describes a part of the topic, as in most cases, chips, fines, particles, salts, etc. also have to be removed.
The terms "commercial and industrial parts cleaning", "parts cleaning in craft and industry", or "commercial parts cleaning" probably best describe this field of activity. There are some specialists who prefer the term "industrial parts cleaning", because they want to exclude maintenance of buildings, rooms, areas, windows, floors, tanks, machinery, hygiene, hands washing, showers, and other non-commercial objects.

Elements and their interactions

Cleaning activities in this sector can only be characterized sufficiently by a description of several factors. These are outlined in the first image above.

Parts and materials to be cleaned

First, consider the parts to be cleaned. They may comprise non-processed or hardly processed sections, sheets and wires, but also machined parts or assembled components needing cleaning. Therefore, they may be composed of different metals or different combinations of metals. Plastics and composite materials can frequently be found and indeed are on the increase because, e.g. the automobile industry, as well as others, are using more and lighter materials.
Mass can be very important for the selection of cleaning methods. For example, big shafts for ships are usually cleaned manually, whereas tiny shafts for electrical appliances are often cleaned in bulk in highly automated plants.
Similarly important is the geometry of the parts. Long, thin, branching, threaded holes, which could contain jammed chips, feature among the greatest challenges in this technical field. High pressure and the power wash process are one way to remove these chips, as well as robots, which are programmed to exactly flush the drilled holes under high pressure.

Contaminations

The parts are usually covered by unwanted substances, contaminants, or soiling. The definition used is quite different. In certain cases, these coverings may be desired: e.g. one may not wish to remove a paint layer but only the material on top. In another cases, where crack proofing is necessary, one has to remove the paint layer, as it is regarded as an unwanted substance.
The classification of soiling follows the layer structure, starting from the base material:
  • Deformed boundary layer, > 1 μm
  • Reaction layer, 1–10 nm
  • Sorption layer, 1–10 nm
  • Contamination layer, > 1 μm
See illustration 2: Structure of a metallic surface
The closer a layer is to the substrate surface, the more energy is needed to remove it. Correspondingly, the cleaning itself can be structured according to the type of energy input:
The contamination layer may then be further classified according to:
  • Origin
  • Composition: e.g. cooling lubricants may be composed differently. Single components may account for big problems, especially for job shop cleaners, who have no control over prior processes and thus don't know the contaminants. For example, silicates may obstruct nitriding.
  • State of aggregation
  • Chemical and physical properties
The American Society for Testing and Materials presents six groups of contaminations in their manual "Choosing a cleaning process" and relates them to the most common cleaning methods, the suitability of cleaning methods for the removal of a given contaminate is discussed. In addition, they list exemplary cleaning processes for different typical applications. Since one has to consider very many different aspects when choosing a process, this can only serve as a first orientation. The groups of contaminants are stated:
  • Pigmented drawing compounds
  • Unpigmented oil and grease
  • Chips and cutting fluids
  • Polishing and buffing compounds
  • Rust and scale
  • Others

    Charging

In order to select suitable equipment and media, it should be known also which amount and which throughput have to be handled. In larger factories, little amounts are virtually ever cleaned economically. Additionally, the pricing method needs to be determined. Sensitive parts sometimes need to be fixed in boxes. When dealing with large amounts, bulk charging can be used, but it's difficult to achieve a sufficient level of cleanliness with flat pieces clinging together. Drying can also be difficult in these cases.

Place of cleaning

Another consideration is the place of cleaning. Cleaning in a workshop calls for different methods as compared to cleaning that is to be done on site, which can be the case with maintenance and repair work.
Usually, the cleaning takes place in a workshop. Several common methods include solvent degreasing, vapor degreasing, and the use of an aqueous parts washer. Companies often want the charging, loading and unloading to be integrated into the production line, which is much more demanding as regards size and throughout the ability of the cleaning system.
Such cleaning systems often exactly match the requirements regarding parts, contaminants and charging methods. Central cleaning equipment, often built as multi task systems, is commonly used. These systems can suit different cleaning requirements. Typical examples are the wash stands or the small cleaning machines, which are found in many industrial plants.

Cleaning equipment and procedure

First, one can differentiate among the following techniques :
  • Manual
  • Mechanical
  • Automatic
  • Robot supported
The process may be performed in one step, which is especially true for the manual cleaning, but typically it requires several steps. Therefore, it is not uncommon to find 10 to 20 steps in large plants, e.g., for the medical and optical industry. This can be especially complex because non-cleaning steps may be integrated in such plants like application of corrosion protection layers or phosphating. Cleaning can also be simple: the cleaning processes are integrated into other processes, as it is the case with electroplating or galvanising, where it usually serves as a pre-treatment step.
The following procedure is quite common:
  1. Pre-cleaning
  2. Main cleaning
  3. Rinsing
  4. Rinsing with deionised water
  5. Rinsing with corrosion protection
  6. Drying
Each of these steps may take place in its own bath, chamber, or, in case of spray cleaning, in its own zone. But often these steps may have a single chamber into which the respective media are pumped in.
Cleaning media plays an important role as it removes the contaminants from the substrate.
For liquid media, the following cleaners can be used: aqueous agents, semi-aqueous agents, hydrocarbon-based solvents, and halogenated solvents. Usually, the latter are referred to as chlorinated agents, but brominated and fluorinated substances can be used. The traditionally used chlorinated agents, TCE and PCE, which are hazardous, are now only applied in airtight plants and the modern volume shift systems limit any emissions. In the group of hydrocarbon-based solvents, there are some newly developed agents like fatty acid esters made of natural fats and oils, modified alcohols and dibasic esters.
Aqueous cleaners are mostly a combination of various substances like alkaline builders, surfactants, and sequestering agents. With ferrous metal cleaning, rust inhibitors are added into the aqueous cleaner to prevent flash rusting after washing. Their use is on the rise as their results have proven to be most times as good or better than hydrocarbon cleaners. The waste generated is less hazardous, which reduces disposal costs.
Aqueous cleaners have advantages as regards particle and polar contaminants and only require higher inputs of mechanical and thermal energy to be effective, whereas solvents more easily remove oils and greases but have health and environmental risks. In addition, most solvents are flammable, creates fire and explosion hazards. Nowadays, with proper industrial parts washer equipment, it is accepted that aqueous cleaners remove oil and grease as easily as solvents.
Another approach is with solid cleaning media which comprises the CO2 dry ice process: For tougher requirements, pellets are used while for more sensitive materials or components CO2 in form of snow is applied. One drawback is the high energy consumption required to make dry ice.
Last but not least, there are processes with no media like vibration, laser, brushing and blow/exhaust systems.
All cleaning steps are characterized by media and applied temperatures and their individual agitation/application. There is a wide range of different methods and combinations of these methods:
Finally, every cleaning step is described by the time which the parts to be cleaned spends in the respective zone, bath, or chamber, and thus medium, temperature, and agitation can affect the contamination.
Every item of cleaning equipment needs a so-called periphery. This term describes measures and equipment on the one hand side to maintain and control baths and side to protect human beings and the environment.
In most plants, the cleaning agents are circulated until their cleaning power has eventually decreased and reached the maximum tolerable contaminant level. In order to delay the bath exchange as much as possible, there are sophisticated treatment attachments in use, removing contaminants and the used up agents from the system. Fresh cleaning agents or parts thereof have to be supplemented, which requires a bath control. The latter is more and more facilitated online and thus allows a computer aided change of the bath. With the help of oil separators, demulsifying agents and evaporators, aqueous processes can be conducted 'wastewater free'. Complete exchange of baths becomes only necessary every 3 to 12 months.
When using organic solvents, the preferred method to achieve a long operating bath life is distillation, an especially effective method to separate contaminants and agents.
The periphery also includes measures to protect the workers like encapsulation, automatic shutoff of power supply, automatic refill and sharpening of media, explosion prevention measures, exhaust ventilation etc., and also measures to protect the environment, e.g. capturing of volatile solvents, impounding basins, extraction, treatment and disposal of resulting wastes. Solvents based cleaning processes have the advantage that the dirt and the cleaning agent can be more easily separated, whereas in aqueous processes is more complex.
In processes without cleaning media, like laser ablation and vibration cleaning, only the removed dirt has to be disposed of as there is no cleaning agent. Quite little waste is generated in processes like CO2 blasting and automatic brush cleaning at the expense of higher energy costs.