Penny (Canadian coin)
In Canada, a penny is an out-of-production and out-of-circulation coin worth one cent, or of a dollar. The Royal Canadian Mint refers to the coin as the "1-cent coin", but in practice the terms penny and cent predominate.
First minted in 1858, the cent was primarily issued as a bronze or with bronze-plated coin throughout its production. Like all Canadian coins, the obverse depicts the reigning Canadian monarch at the time of issue.
Attempts to abolish the penny began in the late 20th century but were initially met with resistance as they were considered a necessity to pay provincial sales taxes. Money had been lost in penny production since at least the mid-1980s and surveys indicated the coin was falling out of use. Attitudes against the penny grew in the late 2000s decade and, in 2010, the Standing Senate Committee on National Finance recommended the penny be removed from circulation.
Production of the penny ceased in May 2012, and the Royal Canadian Mint ceased distribution of them on February 4, 2013. However, the coin remains legal tender. Nevertheless, once distribution of the coin ceased, vendors were no longer expected to return pennies as change for cash purchases and were encouraged to round purchases to the nearest five cents. Goods can still be priced in one-cent increments, with non-cash transactions like credit cards being paid to the exact cent.
Etymology
The Royal Canadian Mint refers to the coin as the "1-cent coin", but in practice the terms penny and cent predominate. Penny was likely readily adopted because the previous coinage in Canada was the British monetary system, where Canada used British pounds, shillings, and pence as coinage alongside U.S. decimal coins.In Canadian French, the penny is often known by the loanword cent; in contrast with the heteronymous word meaning "hundred", this keeps the English pronunciation. Slang terms include,, or , although common Quebec French usage is.
History
Large cents (1858–1920)
The first pennies minted for what would later become the Canadian Confederation originated in legislation enacted in 1853. Per the Act 16 Vict. c. 158, the Province of Canada was to issue "dollars, cents, and mills" that would co-circulate with English shillings and pence. After five years, an order to mint new coins came in 1858 as an effort to improve the Canadian monetary system. This was needed as by this time, the pounds, shillings, livres, and sous in circulation had become antiquated. Pennies, or one-cent coins, were struck in bronze, had a diameter of and weighed each. Coinage for pennies was commenced so late in the year that the bulk of the large order for cents had to be completed in 1859. The 10,000,000 coins ordered easily exceeded the demand and wants of the public that year as the population in the Province of Canada at the time was not even 2,000,000 people.This had a ripple effect, as the "ample supply" of newly issued coins were not withdrawn from circulation. The government of Canada had to intervene over the next 10 years by releasing them into circulation at a 20 percent discount. Fresh production of new cents was not required until 1876. These pennies all have an "H" mintmark on them as they were made in Birmingham, England, by Ralph Heaton & Sons. Heaton continued to mint pennies for Canada in 1881 and 1882 while providing new coin presses and other machinery to the Royal Mint in London. From a business standpoint, this was a failure for Heaton as they "partly sabotaged" their own company by doing so. Enlargements to the facilities at the Royal Mint were completed in 1883, which meant they could handle Canadian coin production. The Royal Mint's deputy master made it "clearly known" to Canada's high commissioner in London that Canadian coinage would be handled by the Royal Mint. Pennies dated 1884, and those dated 1886 to 1888, were all made in London for Canada.
In 1890, the Royal Mint turned to Heaton again for coinage as there was possibly a "rush of business" that year. By this time, the mint was operating under a new name as Ralph Heaton III turned his father's mint into a limited liability company in 1889. The former Heaton Mint was now referred to as "The Mint, Birmingham, Limited" aka Birmingham Mint. When mintage for pennies returned to London in 1891, the Canadian Bankers Association noted that some of those made that year were re-coined. Canadian pennies continued to be minted in England until 1907 with the opening of the Ottawa Mint. Concurrently, Queen Victoria died in 1901 and was succeeded by Edward VII, which required a new obverse portrait for the penny. British medalist George William de Saulles was chosen for the job, and designed a right-facing bust of the King with the words "Edwardus VII Dei gratia Rex Imperator" and "Canada". This portrait was used until Edward's death in 1910, and controversy arose the following year with a new design for George V.
King George V's portrait was designed by Australian sculptor and medalist Bertram Mackennal with the words "Georgius V Rex et "; however, this was criticized by the public as the decision to omit "Dei gratia" was called "godless" and "graceless". As a result the words Dei were added into the design the following year, and large cents continued to be produced until 1920. Pennies were reduced to their modern size that year which brought them closer in size to the American penny.
Small cents (1920–1952)
On May 11, 1920, the Parliament of Canada issued a proclamation about a "New Bronze Cent" which was to be wide with a weight of. These smaller pennies featured an unchanged obverse design with the effigy of George V looking left surrounded by abbreviations. The reverse was given a new design with "the words ONE CENT supported by a maple leaf on either side, and bearing the word CANADA above and the date of issue below." During this transition period the old large cents were not withdrawn, but they were allowed to wear down through circulation until their redemption. Starting in 1922, a "period of economic malaise" that lasted throughout the mid-1920s led to low mintage amounts for pennies. Mintage figures "marked a hesitant return" in 1926; over two million pieces were struck that year. When King George V died in January 1936 his son Edward VIII assumed the throne, but he abdicated in December.After his brother George VI assumed the throne on December 11, 1936, a new effigy was needed for Canadian coinage. As it was late in the year, the Royal Mint could not immediately make coins with a die depicting the new king with a 1937 date. It was instead decided by the mint to continue minting 1936 dated pennies with a dot added below the date on the reverse which signified that they were made in 1937. According to mint records 678,823 of these coins were minted; however, only three are known to have survived to the present. The new effigy of George VI was designed by Humphrey Paget and was ready for use later in the year. The king is shown on the obverse side facing left, with the inscription "Georgius VI ". The reverse was designed by George Kruger Gray and depicted a maple twig with two leaves; the wording "1 CENT" appears above them, and "CANADA" with the date is shown below. While pennies with their new design continued to be minted unabated throughout World War II, there was a change in composition. Starting on April 1, 1942, Canadian pennies had their copper content increased from 95.5 percent to 98 percent and their tin content lowered from 3 percent to 0.5 percent.
The Indian Independence Act 1947 affected the penny, as the words had to be removed from the obverse of the coin. This change was made under article 7.2 of the act. As the dies omitting the title were not immediately ready for use, a small maple leaf was added next to the 1947-dated coins on the reverse for pennies minted into 1948. This was not the first major alteration; from a collector's standpoint "the mid-20th century brought a series of varieties to Canadian coins". King George VI died in 1952, and a new obverse effigy featuring Queen Elizabeth II appeared in the following year.
Small cents (1953–2009)
The first effigy of Queen Elizabeth II was designed by sculptor and medalist Mary Gillick, who chose to depict the queen at 27 years old facing right. As with the previous monarchs, her effigy is surrounded with Latin text which reads "Elizabeth II Dei Gratia Regina". For Canadian coinage, this marked the first time that master dies were made at the Royal Canadian Mint. Canadian pennies dated 1953 to 1955 come in two major varieties "with and without a fold of fabric" on the new effigy. The reason for this remains unclear as proposed theories include overly polished dies, or alternatively the relief of the effigy being too high to strike properly. In 1956, the Master of the Royal Canadian Mint noted that of worn bronze coins and of World War II–era tombac nickels were converted for use in one-cent coinage. High-speed presses were installed at the mint in the early 1960s, which meant that more Canadian pennies were being made at rates that exceeded 70% when compared to prior years.In 1964, Queen Elizabeth approved a second effigy of herself on Canadian coinage, which was made by British artist and sculptor Arnold Machin. This second bust features the Queen facing right while wearing a tiara surrounded by Latin text where "Dei Gratia" is abbreviated again to read "D.G." When these new pennies debuted in 1965, the denticles on both sides of the coin were replaced by beads, but these were affected by striking difficulties. Canada celebrated its centennial in 1967; this was marked by a special design on the reverse side of each circulating denomination. For the penny, artist Alex Colville designed a depiction of a rock dove in flight, with a dual date of "1867–1967". The reverse design reverted back to George Kruger Gray's maple leaf in 1968, and in 1978 slight changes were made to the composition and thickness which gave the pennies a "thin planchet". Further changes were made to the penny in 1980 which included a slight reduction of 0.05 mm in diameter, and a weight change from 3.24 g to 2.8 g. These specifications only lasted another year before the penny was changed again in both shape and weight.
Canadian pennies minted from 1982 to 1996 have a twelve-sided edge to them, which was put in place to help assist the visually impaired. While their composition did not change, these new pennies are also lighter: their weight was further reduced from 2.8 to 2.5 g. This did not help production costs: the Royal Canadian Mint noted in 1984 that a penny cost more than its face value to produce. In 1990, a third effigy of the queen was used for Canadian pennies which was designed by Hungarian-Canadian sculptor Dora de Pedery-Hunt. This third design depicts Elizabeth II when she was 64 years old surrounded by the previously used Latin script. Pennies minted in the 1990s include a dual-dated "1867–1992" coin which marked Canada's 125th anniversary. In 1997, the penny was changed from bronze to copper-plated zinc, which reduced the weight of the coin from 2.5 g to 2.25 g. The twelve-sided shape was changed back to a round shape during this time as the copper-plated zinc proved difficult to plate.
Elizabeth II was honoured on the penny in 2002 as the coins carried a dual date of "1952–2002", for her Golden Jubilee. Penny mintages for "2002" also include those marked with and without a "P" below Elizabeth II's bust. This letter identifies those made of copper-plated steel, as opposed to those with copper-plated zinc. Two effigies of the Queen were used in the following year which include Hunt's "old effigy", and a fourth and final effigy made by portrait artist Susanna Blunt. This final depiction of the Queen shows a right-facing uncrowned bust with the same previously used Latin script. While the "P" mark below her bust was later dropped and replaced with the RCM logo in 2007, pennies continued to be minted using the two different compositions. To identify the difference, those made of plated steel are dubbed "magnetic" as they stick to a magnet, as opposed to the "non-magnetic" copper-plated zinc coins.